three replacement splashes for mytouch

---

here are three replacement splash images I made for the mytouch
all you need to do is to copy the image you want to flash to your sdk tools directory and hook up your phone is fastboot mode. Turn phone off press and hold back and power and then connect usb cable and run the following command.

fastboot flash splash1 image.rgb565

just replace the word image above with the name of the file that you have and then use

fastboot reboot

enjoy new splash

im still a little confused....

What are you confused about? All it is, is a replacement splash screen. The screen that you see the first when the phone is powering up. All you do is extract to the SDK/tools folder on your computer from the android sdk that should be installed on your computer. Start the phone is fastboot like i mentioned above and the type the commands. with a more direct example say you want the middle one, once you have extracted and done the other steps (if you are unsure of above search around the forum there are steps elsewhere)

the command for the middle image is

fastboot flash splash1 badtouch.rgb565
fastboot reboot

and then that image will be your new splash screen on the device. very simple.

ha! M.J.'s BAD

you think you could make a "don't worry this mytouch has root" splash screen like the on for the g1

Haven't seen that one. Have a link?

Error

---

I get this error while trying to flash the boot screen

sending 'splash1' (300 KB)... FAILED (remote: not allow)

What am I doing wrong

Sounds like you still have the original locked spl. You will need to flash a unlocked spl to do this. Just look at the how to root unroot MyTouch thread. It goes over the how to.

I love the 1bad splash! Thanks!