How to Root and Unlock the Google Nexus 6 on a Mac – XDA TV

In the past, XDA Developer TV Producer droidmodd3rx has shown you how to … more

Set Up Your MediaTek Device with Comprehensive Beginner’s Guide

As can be seen with the use of MediaTek chips in Android One devices … more

Sony Updates AOSP Sources to Android 5.0.1

Just a few days ago, Sony did an utterly fantastic job by pushing out numerous device trees for … more

Stop Your Screen From Turning Off with KeepItOn

We all know the feeling of reading a news article orrather longdocument, when our screen … more

Welcome to XDA

Search to go directly to your device's forum

Register an account

Unlock full posting privileges

Ask a question

No registration required
Post Reply

How to fix bad block?

OP oskarppunkt

17th October 2009, 01:16 PM   |  #1  
OP Junior Member
Thanks Meter: 0
 
14 posts
Join Date:Joined: Feb 2008
More
I had some problems flashing a Rom..
After some tries i used mtty..

Cmd>task 32
Level = FF

Cmd>task 28
Storage format start

Write Nand Success

dwBlockToWrite = 13

Storage start block: 433

Storage Total block: 503

Total Bad Block in CE: 0

NeedToEraseBlockStart: 446

NeedToEraseBlockEnd: 936

Storage format success


Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is BAD block !!!
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block

Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x18100
Partition[3], type=0x4, start=0x1B100, total=0x1F700

CE Total Length(with sector info) = 0x36F8800
CE CheckSum Length(without sector info) = 0x3620000


I tried to whit other Hard spl and sspl but everytime the same..


Cmd>task 32
Level = 0

Cmd>task 28 55aa
Storage format start

Write Nand Success

dwBlockToWrite = 13

Storage start block: 433

Storage Total block: 503

Total Bad Block in CE: 0

NeedToEraseBlockStart: 446

Storage format success


Cmd>task 28
Storage format start

Write Nand Success

dwBlockToWrite = 13

Storage start block: 433

Storage Total block: 503

Total Bad Block in CE: 0

NeedToEraseBlockStart: 446

Storage format success


Cmd>task 2a

Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is BAD block !!!
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block

Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x18100
Partition[3], type=0x4, start=0x1B100, total=0x1F700

CE Total Length(with sector info) = 0x36F8800
CE CheckSum Length(without sector info) = 0x3620000

Cmd>


How can i fix it...??
thx
12th November 2009, 04:36 PM   |  #2  
Senior Member
Thanks Meter: 2
 
153 posts
Join Date:Joined: Sep 2007
More
...
up
...
12th November 2009, 06:55 PM   |  #3  
Member
Thanks Meter: 1
 
76 posts
Join Date:Joined: May 2003
I have the same problem.

any solution?????
21st August 2010, 02:59 PM   |  #4  
Qamarzamsyawal's Avatar
Member
Flag Kajang
Thanks Meter: 0
 
69 posts
Join Date:Joined: Jul 2009
More
yeah me too..my P3600i was fine with until i start flashing..I also got the same result.After using mtty..perhaps our method is wrong.Any experts here pls help us "i" users.
22nd August 2010, 09:28 AM   |  #5  
SuperSport's Avatar
Recognized Contributor
Flag Northern California
Thanks Meter: 463
 
2,986 posts
Join Date:Joined: Jun 2007
Donate to Me
More
On the P3600, it is normal to have a bad block #6 after MTTY. It still functions normally with that.

On the P3600i, I'm sure there is also at least one bad block, but maybe they are different locations.

Someone with a good P3600i know the desired results?
23rd August 2010, 08:06 AM   |  #6  
Qamarzamsyawal's Avatar
Member
Flag Kajang
Thanks Meter: 0
 
69 posts
Join Date:Joined: Jul 2009
More
Question
maybe there is no one with good P3600i.Is there any other way to figure it out?Someone who have the original rom maybe?
1st September 2010, 07:11 AM   |  #7  
Qamarzamsyawal's Avatar
Member
Flag Kajang
Thanks Meter: 0
 
69 posts
Join Date:Joined: Jul 2009
More
Mtty116 IS A TROJAN??
I wonder why is so hard to find this cute little software..
This is why..
http://www.virustotal.com/file-scan/...38a-1283316550
Last edited by Qamarzamsyawal; 1st September 2010 at 07:16 AM. Reason: link upside down
1st September 2010, 11:46 AM   |  #8  
SuperSport's Avatar
Recognized Contributor
Flag Northern California
Thanks Meter: 463
 
2,986 posts
Join Date:Joined: Jun 2007
Donate to Me
More
Quote:
Originally Posted by Qamarzamsyawal

I wonder why is so hard to find this cute little software..
This is why..
http://www.virustotal.com/file-scan/...38a-1283316550

My guess would be that this is due to the fact that the software 'MTTY' is specifically designed to modify the Operating System, thus the Trojan Warning. For those who do not know what it's for, they could cause damage to their systems. This is just a theory. I've used MTTY for a couple years now, and have not noticed any adverse side effects, but maybe I'm missing something...

By all means, if you are not comfortable using it, please do not. Better safe than sorry.
2nd September 2010, 10:48 AM   |  #9  
Qamarzamsyawal's Avatar
Member
Flag Kajang
Thanks Meter: 0
 
69 posts
Join Date:Joined: Jul 2009
More
Smile One Bad Block is down..One more to go
Hey Sport!!
Successfully erase one bad block from my P3600i. But there is another one. It won't come out. Do anyone know why is this happen??
This is my result using "mtty116.exe"


Cmd>set 14 0
Write Nand Success
HTCST HTCE
Cmd>task 28 55aa
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 646
Storage Total block: 1357
Total Bad Block in CE: 0
NeedToEraseBlockStart: 659
NeedToEraseBlockEnd: 2003

Storage format success


Cmd>task 0

Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x346(838) is BAD block !!!
Block 0x792(1938) is BAD block !!!

Partition[0], type=0x20, start=0x2, total=0xFE
Partition[1], type=0x23, start=0x100, total=0x1300
Partition[2], type=0x25, start=0x1400, total=0x27200
Partition[3], type=0x4, start=0x28600, total=0x54D00

CE Total Length(with sector info) = 0x5203000
CE CheckSum Length(without sector info) = 0x50C0000

Cmd>password

Cmd>task 32
Level = 0

Cmd>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 646
Storage Total block: 1357
Total Bad Block in CE: 0
NeedToEraseBlockStart: 659
NeedToEraseBlockEnd: 2003
Storage format success

Cmd>task 2A
Check block : 838 - Good

Check block : 1938 - Bad


Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x792(1938) is BAD block !!!

Partition[0], type=0x20, start=0x2, total=0xFE
Partition[1], type=0x23, start=0x100, total=0x1300
Partition[2], type=0x25, start=0x1400, total=0x27200
Partition[3], type=0x4, start=0x28600, total=0x54D00

CE Total Length(with sector info) = 0x5203000
CE CheckSum Length(without sector info) = 0x50C0000

Cmd>task 8
17th August 2011, 10:48 AM   |  #10  
coolpixs4's Avatar
Senior Member
Thanks Meter: 90
 
405 posts
Join Date:Joined: Mar 2011
my P3600 have 2 BAD block, how can I fix it ?

Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is BAD block !!!
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x3E2(994) is BAD block !!!

Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1500
Partition[2], type=0x25, start=0x2E00, total=0x1D100
Partition[3], type=0x4, start=0x1FF00, total=0x5C400

CE Total Length(with sector info) = 0x40DF800
CE CheckSum Length(without sector info) = 0x3FE0000

Cmd>

Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes