Att tilt 2 rom flashing thread

---

I am making this thread because I just bought a ATT Tilt 2 yesterday and i've been doing my best to flash this phone but it wont work! I know how to flash because I've done it plenty of times with the Fuze, but this phone keeps freezing when it gets to the percentage screen.

I've tried both methods, Via USB and Via Micro SD....

When I did the USB, everything goes fine until the percentage screen on my phone and the computer screen show up, then it stays on 0% until I get an error messages telling me to unplug my phone and retry.

When I tried Micro SD, at the bootloader screen it stays on the "Loading..." forever, it never goes to "Checking"...

So i'm thinking AT&T has something to do with this? They've found a way for customers to be blocked from flashing another rom? Please tell me there is a way out of this...i've seen other users with ATT Tilt 2's claiming they've flashed their phones...but I know I can't be the only one with this problem.

I take it you have already put Hard SPL on the device?

Plenty of other people have put custom ROMs on their Tilt 2. So it's nothing AT&T have done.

Dave

HardSL

---

It wont let me even put HardSPL....it wont let me do anything period... it just freezes.

The percentage screen stays at zero percent. So i'm lost.

Have you installed the enablerapinew cab? That's all I had to do in order to get HardSPL to go through on my Tilt2

http://forum.xda-developers.com/show...87&postcount=1

Originally Posted by themasterhook2000

It wont let me even put HardSPL....it wont let me do anything period... it just freezes.

The percentage screen stays at zero percent. So i'm lost.

I have a tilt 2 and I am running NRG Photon 10/17 ROM and loven it, but is was not easy to get to this point. My main issue was with HardSPL. I had to go through a couple extra steps in order for it to work. The first issue was a connection error, i followed the directions in the error message and went to the appropriate link.

The second issue is on the flashing page. "anyone having problems with the device entering SSPL without functional USB port ("ERROR 260 CONNECTION" RUU error), you can get SSPL-Manual-Rhodium.exe from attachment in this post, copy it to the *device* itself and run it. then once the screen is showing black, run the Hard-SPL package on the PC and select Manual flash option. please do not use Manual flash option for any other purposes


another reason for USB connection error: if your PC takes too long to load the drivers (if your device is in bootloader for the first time it needs to do that), then if RUU times out, but device is still in black screen, just leave it there and re-run the Hard-SPL package when driver installation finishes - you must use Manual Flash option in such a case. I recommend to wait for Windows to take its time searching for the USB drivers, then click Next in RUU only when they are installed.[/I]

These helped me out and all is good. Hope this helps you as well. If not, good luck my friend.

Originally Posted by Decer

Have you installed the enablerapinew cab? That's all I had to do in order to get HardSPL to go through on my Tilt2

http://forum.xda-developers.com/show...87&postcount=1

That was my first step as well. I did not have the link handy...

try this. http://rhodium.htc-unlocks.com/ works like a treat and although I paid for it, I am also Security unlocked.