Imagio 040 SPL

---

use for rewrite ESN and flash ROMs. good luck.
rename it to .rar, its a winrar file.

MOD EDIT - Removed file. PM me if you disagree and provide me with more history/evidence

Leave it. He has 1 post and the SPL hasn't been cracked yet. Probably a scam.

I have re-opened this thread.

@ ls1024 - Feel free to modify first post again and provide more info including what you showed me in PM

Rick

Thanks Spartan for looking at this. Hopefully once he posts more info it will be what we Imagio users are desperate for, or a step in that direction.

Originally Posted by Narcotichobo

The linked thread reads as following:

Only 6975's with spl already unlocked can be flashed, before you flash please make sure your spl is unlocked.

Currently all chinese phones come unlocked.

To confirm, go into the three color screen (hold down the volume button and the device on button), spl should be 0.40.0000

After flashing check to see if the radio number is 2.05ESNWVL

The operation below is identical to the 6875 (TP2), if you have a problem refer to posts on 6875 (TP2) ESN post
Use any version of CDMA Work Shop

On the terminal page, commands section

27 97 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

After you press send the MEID should be cleared

Afterward you can write whatever ESN

When you finish you can flash any radio and won't lose the ESN

Reference: Tutorial on writing the 6875
http://www.diypda.com/viewthread.php...a=page%3D1





Alright, I don't know how to do any of that stuff, but i'm 95% sure on the translation so I hope that helps someone who does know what they are doing!

Also there seems to be an attachment to the post in that thread but i can't access it because I am not a forum member, and registration requires an invitation number.

The 0.40 SPL comes on the Chinese version of the Imagio and it allows writing of the ESN and flashing.

All being chatted in this thread:
http://www.forum.ppcgeeks.com/showthread.php?t=97542

Cmonex is working on the HSPL ATM and I do believe it will be based off of the 0.40 SPL

Originally Posted by Americanmetal

The 0.40 SPL comes on the Chinese version of the Imagio and it allows writing of the ESN and flashing.

All being chatted in this thread:
http://www.forum.ppcgeeks.com/showthread.php?t=97542

Cmonex is working on the HSPL ATM and I do believe it will be based off of the 0.40 SPL

Woot I got quoted here.

\/
||
||
\/

And this helps us .38 how?

I think I read this over at PPCG but no instructions on how to do it on a .38 SPL so basically this is for the .40 Imagio only correct?

I posted both modified radios for TP2 and Imagio on PPCG and also a utility to write MEID/ESN (all 3 files from diypda china)

Originally Posted by narcotichobo

Woot I got quoted here.

I had to get this thread unlocked rofl

Still, how can we upgrade to .40? That's what's holding us from at least changing radios to chinese ones hehehe