My digi just died. Actually it stopped working and few days after it worked for 5-10mins and then died again so I have a question for you guys here.
my number in tri color mod is 0x030 which means that I have solder type digi I guess? If I replace lcd+digi I don't have to worry which type of connection it is since I don't connect digi on board but lcd?
Can you recommend me some lcd+digi or only digi from ebay? I have EU model with 512MB RAM. If you need some additional info, I'll give it asap.
Thank you and looking forward to get some help here cause I don't want to get rid of this kingphone
Have some links to parts in HD2 wiki section, if replacing lcd & digi then not important if solder or socket as they will already be a matched assembled set.
I would aim at doing the repair with digi only as it cheaper & original lcd is far better than what you get when buying complete assembly & they don't assemble with very good tape in general.
Make sure to buy the assembly tapes including the black shaped padded tapes for top & bottom of digi to chassis as without them the finish assembly will be poor.
few points in this thread may be of help ... http://forum.xda-developers.com/show....php?t=2489363
Should be ok ...
Only suggestion is remove digitizer first before order parts as if damage LCD then you will need lcd/digi assembly.
Only other thing is take a lot of care & review images or ask questions if needed.
Many of the guides are rubbish & strip the device far more than needed, all the volume button plus cables that run down by it and 85% of the flex ribbon can stay stuck in original factory position which saves the normal hassles of damaged/poor function volume key or dead camera lens & led ... good luck ...
XDA Developers was founded by developers, for developers. It is now a valuable resource for people who want to make the most of their mobile devices, from customizing the look and feel to adding new functionality. Are you a developer?