how to view the nam2 in omnia i910 Verizon CDMA?

---

configured the NAM1, but I need to configure NAM2, for use in VIVO CDMA (Brasil)

through the code ** 772 not meeting the nam2 only nam 1

**772 to enter service code area

000000 to enter programming phone number area

1º - Shows MEID (can't change) - press Enter
2º - Shows ESN (can't change) - press Enter
3º - Shows AKEY (don't know what is that) - press Enter
4º - Shows SVC MODE NAM1 - type your phone number - press Enter
5º - Shows MSIN(MIN) - already is your phone number, just press Enter
6º - Shows CDMA Home SID (don't know what is that) - press Enter

That is, but it didn't worked on my country. Probably because the MEID number. Here they work with 8 hex digits, not the MEID 14 hex digits.

Originally Posted by YAK_BR

configured the NAM1, but I need to configure NAM2, for use in VIVO CDMA (Brasil)

through the code ** 772 not meeting the nam2 only nam 1

**772 to enter service code area

000000 to enter programming phone number area

1º - Shows MEID (can't change) - press Enter
2º - Shows ESN (can't change) - press Enter
3º - Shows AKEY (don't know what is that) - press Enter
4º - Shows SVC MODE NAM1 - type your phone number - press Enter
5º - Shows MSIN(MIN) - already is your phone number, just press Enter
6º - Shows CDMA Home SID (don't know what is that) - press Enter

That is, but it didn't worked on my country. Probably because the MEID number. Here they work with 8 hex digits, not the MEID 14 hex digits.

To navigate properly in there seems to require a D-pad. For the Omnia 2, I had to program my Center button (via AEButton +) to be able to go Down, Right, and Enter, with single, double, and triple presses of the button. Probably Up would help, too.

A bit more in my "Service Mode..." post. But that is about all I can offer in the way of help, as I don't know much about the rest of the settings in there.

Originally Posted by Robtao

To navigate properly in there seems to require a D-pad. For the Omnia 2, I had to program my Center button (via AEButton +) to be able to go Down, Right, and Enter, with single, double, and triple presses of the button. Probably Up would help, too.

A bit more in my "Service Mode..." post. But that is about all I can offer in the way of help, as I don't know much about the rest of the settings in there.

thanks a lot Robtao, I'll try your suggestion ...
===
someone else can help me?

Also, you can use the arrows and enter in SWYPE. From Geebox in post number 2 in my other Service Mode thread:
http://forum.xda-developers.com/show...46&postcount=2