screen sensitivity

---

do you know a way to increase the screen sensitivity? i search over the forum and the registry but i didn't found anything.
thx

Originally Posted by jeams

do you know a way to increase the screen sensitivity? i search over the forum and the registry but i didn't found anything.
thx

Yes, I agree, it's too insensitive to perform Swype keyboard as well as in other devices....

I've got no problems with mine - one thing to try :-

When calibrating the touch screen, use the stylus but press very lightly on the crosshairs, just gently touching them should work - this is because calibration also calibrates the pressure needed to register.

So if you do this lightly instead of stabbing at them hard and fast you should get a more touch sensitive experience.

Hope this helps

Paul

+1 for that.
I had to recalibrate mine (the seller had done it rather carelessly, and tg reacted as if I had touched the screen more than 2mm under where I actually did!)
Calibration worked though I almost did not press, and touch experience has been real fine since.

thx it works!

Hey guys - glad it worked

Originally Posted by paulrgod

I've got no problems with mine - one thing to try :-

When calibrating the touch screen, use the stylus but press very lightly on the crosshairs, just gently touching them should work - this is because calibration also calibrates the pressure needed to register.

So if you do this lightly instead of stabbing at them hard and fast you should get a more touch sensitive experience.

Hope this helps

Paul

Paul,

Many thanks for that suggestion - I've been using Resistive touchscreen for years and must admit I hadn't realised that the Screen Calibration affected touch sensitivty as well as accuracy. Have now recalibrated my TG01 with feather-touch on the cross-hairs as you suggest and can definitely see the difference.

Well done - great tip !

Amazing tips thank you very much!!!!!!

Originally Posted by paulrgod

When calibrating the touch screen,...... calibration also calibrates the pressure needed to register.......

Paul

Really? I'll try it to check if that works...Never read before.....is there any article or technical document where you base this argument?est Regards

Originally Posted by Pere

Really? I'll try it to check if that works...Never read before.....is there any article or technical document where you base this argument?est Regards

**** is real . winmo stores the required pressure amount to trigger an action in a value in registry ... there are reg tweaks for this for other winmo phones , but calibrating it like this is faster and easier