[ROM][GSM] Sinan's I8000 WM6.1 JD4 UltraLite [Discontinued]

sinancetinkaya · 09:50 AM

[ROM][GSM] Sinan's I8000 WM6.1 JD4 UltraLite [Discontinued]

As all of you know I was doing this rom for my personal use but I don't have enough time anymore to answer your questions, requests. Therefore I stopped sharing it. Thanks to everyone.

Hepinizin bildiği gibi bu romu kendi kullanımım için yapıyordum fakat artık gelen sorularınıza, isteklerinize cevap vermek için yeterli zamanım olmadığı için yayınlamayı durdurdum. Herkese teşekkürler

Credits

Thanks to GinKage and ChainFire for their OpenGL ES 3D drivers v1 compatibility layer
Thanks to wes58 for his romTool
Thanks to rodrigofd for his o2util
Thanks to pako777 for his Executor
Thanks to quattro formaggi for his FUS Downloader
And thanks to everyone whose posts helped/didn't help me

Caution!!!/ Dikkat!!!

- Flash this ROM at your own risk, I take no responsibility for any conflict, fault, or damage caused by this flashing procedure. / Rom'u yukleme sorumlulugu tamamen size aittir, yukleme prosedurunden kaynaklanan herhangi bir anlasmazlik, aksaklik veya hasardan kesinlikle sorumluluk kabul etmiyorum.
- Flashing custom ROMs will void your warranty. / custom romlari cihaziniza yuklemek garantinizi gecersiz kilar.
- Ensure the device has atleast 50% charge / Cihazınızın sarjinin en az %50 olduğundan emin olun
- It will erase all your data (same as Master Clear or Hard Reset) / islem cihazinizdaki butun bilgileri silecek ( Master Clear ve Hard Reset'te oldugu gibi)
- Do not try to restore your backups from a previous ROM. / onceki bir romdan almis oldugunuz yedekleri geri yuklemeyin

21/07/2010
Drivers are mainly updated to JF5 (new sound driver fixed the 3 sec ring delay issue)

4 mb PagePool: http://www.mediafire.com/?g8crwkwdysmf6t9
8 mb PagePool: http://www.mediafire.com/?h5ya6t4arbnbr3i
to change pagepool, look here http://www.modaco.com/content/i8000-omnia-...to-your-liking/

Known issues:
This mix of wm6.1 MS kernel and WM6.5 Native Kernel may cause some synchronization issues after switching i8000 from USB Mass Storage to ActiveSync, System may need restart

sinancetinkaya · 10:09 AM

FAQ

Q: Some programs are not working
A: If your program needs .net library, Install NetCF. I removed NetCF because you can install newer versions to storage card or my storage without losing main storage. NET required apps: Fingerkeyb, NoData, G-alarm, O2flash, O2compass etc

Q: Will you add XDA_UC into rom?
A: No, you can install it after flashing. Here it is http://www.modaco.com/content/i900-general...b-for-everyone/ Or use Sashimi which is better

Q: I can't watch youtube videos using web browser
A: Install FlashLite 3.1

Q: I can't see my operator settings in start>settings>connections>connections
A: Once choose different operator then choose your operator again.

Q: Can flash your rom with my own csc ?
A: I don't recommend it but you can. I have removed a lot of things that your csc may need. CSC files are not just language (mui) files.

Q: I can't find many settings. Performance settings, Brightness, operator settings etc
A: I removed samsung settings panel. I made 2 cabs for settings. One is new style setting comes with wm6.5. Other is the old style settings. Just take a look at my cabs

Q: Will you add HTC Sense 2.5 into your rom?
A: This is an UltraLite rom, the answer is NO

Q: I can't connect Internet via ActiveSync
A: enable [Samsung Settings/Network Settings/ Browser Connections/Automatically detect settings]

Suggestions

* I suggest this black theme, it's better than JD1's black theme

* Here is an Icon modification for the advanced folder, I like this. Thanks to sh.a.rk
[quote name='sh.a.rk' post='1242241' date='Apr 12 2010, 15:17']

kireeff · 29th March 2010, 02:04 AM

Do you have a CAB file to restore the "block recognizer" which has been removed from some roms?

Willis111 · 4th April 2010, 09:05 PM

Can't get 3g working, install rom and even try to enter my providers settings manually but it disconnects whenever I try to access any content (already checked the faq, phone is registered on the network but not automagically downloading data settings etc)