NBH Files Eclair 03-05-10

---

Here are the nbh files compiled upto the last change in the Dzo's GIT on the 03-05-10.

15-04-10 Updated - Uploaded new nbh's due to not working with Sense 2.1 build. Thanks kallt_kaffe & toasty_.
22-04-10 Updated - Latest Change from Dzo's git - Fix GPS enable/disable race condition on Kaiser.
26-04-10 Updated - Latest Change from Dzo's git - Add delays to vfe commands
29-04-10 Updated - Latest Change from Dzo's git - Add a delay to the adsp code and change the dsp irq handler.
03-05-10 Updated - Latest Change from Dzo's git - Add adsp delay and irq trigger change for cdma devices only.

PS: You may have to wipe system to get this to work so if your currently happy wait until you update your andriod system.

Here's the ones for the AT&T Tilt.

Updated 03-05-10 - See Post 1

What's the difference between the files in the first post compared to the second post?

Originally Posted by Dukenukemx

What's the difference between the files in the first post compared to the second post?

ATT Tilt Keyboard layout.

tried this with eclair, and it gets stuck on at

A N D R O I D

Originally Posted by xPreSiDenT

tried this with eclair, and it gets stuck on at

A N D R O I D

What build of eclair did you use as it sounds like the kernel is booting as it get's to where ANDRIOD is displayed.

I'm been using polymod 2.1g + the upgrade posted in the thread, it's been working ok for me. My knowledge of Andriod and linux is still quite limited, so I'm not sure what else to recommend.

happened to me too... just reinstalled the system with androidinstall.tgz (without wiping data) and all went well

I'm also using 2.1g, but I dont know about the update. Ive installed all the updates (polymod_2.1g-BT_Update.zip and the full market update) posted after 2.1g.. are there any more? I dont know how to update the kernel as is posted on the first page:

UPDATE 19 Mar 2010:
Latest .NBHs and Kernel for Kaiser & Polaris posted to http://ponack.net/poly/BT_Update/ , thanks again to Mr PaveL for building them.
If you're using HaRET, the same zImage now works for Donut AND Eclair. For Eclair you will need to add hw3d.version=1 to the command line in your default.txt . If the previous BT zImage wasn't working for you, this one should. (New Vogue .nbh and the same kernel can be found @ dzo's site.)

as far as I know the zImages are for haret users only... am I wrong?

Originally Posted by xPreSiDenT

I'm also using 2.1g, but I dont know about the update. Ive installed all the updates (polymod_2.1g-BT_Update.zip and the full market update) posted after 2.1g.. are there any more? I dont know how to update the kernel as is posted on the first page:



as far as I know the zImages are for haret users only... am I wrong?

ZImages are for Haret you are correct.

PolyMod Update
http://forum.xda-developers.com/show...postcount=3011

What's the difference between the different Panel types? How do I know which one to use?