Attend XDA's Second Annual Developer Conference, XDA:DevCon 2014!
5,737,452 Members 42,626 Now Online
XDA Developers Android and Mobile Development Forum

[HOWTO] Froyo xxJPK (Odin), Root, Lagfix, Recovery 2e!

Tip us?
 
Aery
Old
(Last edited by Aery; 28th September 2010 at 11:45 AM.)
#1  
Senior Member - OP
Thanks Meter 8
Posts: 561
Join Date: Aug 2010

 
DONATE TO ME
Default [HOWTO] Froyo xxJPK (Odin), Root, Lagfix, Recovery 2e!

IMPORTANT NOTES, MUST READ FIRST
  • IF 3-BUTTON-COMBO DOES NOT WORK ON YOUR PHONE, FIX IT BEFORE FLASHING! FIX IS THERE: http://forum.xda-developers.com/showthread.php?t=785201
  • IF PHONE STUCKS AT ANIMATED "S", DO A FACTORY RESET/DATA WIPE FROM RECOVERY!
  • IF YOU HAVE FORCE CLOSES, DO A FACTORY RESET/DATA WIPE FROM RECOVERY!
  • DO NOT RESTORE APPDATA WITH TITANIUM BACKUP IF YOU UPGRADE FROM 2.1 TO JPK



MAKE A BACKUP OF YOUR /efs FOLDER!
- In some cases it's possible that this Firmware will change the Product Code of your Phone. So it's good to have a Backup. ;)


------------------------------------------------------------------

HOWTO UPGRADE TO JPK USING ODIN:


Download:
Multiupload: http://www.multiupload.com/F6RZMQEW2H
Rapidshare: http://rapidshare.com/files/42086287...9000_XXJPK.rar
Depositfiles: http://depositfiles.com/de/files/txbu94s1s

Included:
  • Odin3 v1.3
  • Pit 512

- Download
- Extract
- Make sure Kies is not running
- Open Odin
- Enable Re-Partition Checkbox
- Choose "s1_odin_20100512.pit" as PIT (Download PIT-Files: http://www.multiupload.com/5YOPDTN7CZ)
- Choose "I9000XXJPK-REV03-PDA-low-CL584433.tar.md5" as PDA
- Choose "MODEM_I9000XXJPK.tar.md5" as PHONE
- Choose "GT-I9000-CSC-MULTI-OXAJPK.tar.md5" as CSC
- Start Phone in Download-Mode
- Connect Phone via USB
- Flash
- Goto Recovery and do Factory Reset / Data Wipe
- Reboot

Note:
It's recommended to use PIT 512 for Flashing. Flashing with PIT 803 will cause Problems.

If Odin hangs at
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
Pull the Battery, restart Phone in Download-Mode, restart Odin and try again.

------------------------------------------------------------------

HOWTO ROOT JPK FIRMWARE:

Note: Chainfire has created new CF-Root. http://forum.xda-developers.com/showthread.php?t=788108


Stock zImage: http://www.multiupload.com/ULQEGKORBE

Included:
  • Root
  • Superuser 2.3.6.1
  • Busybox 1.17.1
  • Recovery 2e
  • /system read-only

- Extract
- Look @ readme file


------------------------------------------------------------------

HOWTO UPGRADE TO BUSYBOX 1.17.1

Note: It's not needed to install Busybox 1.17.1 if you've used Roor-Package from this Post. It's always included.

- Make sure you´ve rootet the Phone
- Open Terminal Emulator
- Type: su [ENTER]
- Type: busybox mount -o remount,rw /system [ENTER]
- Close Terminal Emulator
- Download Busybox from Market
- Start the App
- Do not install
- Close the App
- Open Terminal Emulator again
- Type: su [ENTER]
- Type: cp /sdcard/busybox /system/xbin/busybox [ENTER]
- done

------------------------------------------------------------------

STOCK LOCKSCREEN FOR UNTOUCHED JPK
needs Recovery 2e

What does this Script do?
It changes Samsung Lockscreen to Stock Android 2.2 Lockscreen.
- Backup /system/framework/android.policy.odex to /system/framework/android.policy.odex.bak
- Copy new android.policy.odex to /system/framework/

Download:
Multiupload: http://www.multiupload.com/HMBNFQADEY

- Copy update.zip to internal SD
- Reboot into Recovery
- apply update.zip
- done

Howto go back to Samsung Lockscreen?

Stock Lockscreen Remover
Download: http://www.multiupload.com/0KP69HOTIK

------------------------------------------------------------------

HOWTO REFRESH BATTERY STATS:
http://forum.xda-developers.com/showthread.php?t=722862

------------------------------------------------------------------

HOWTO APPLY LAGFIX TO JPK:
Not really needed.

One Click Lagfix App: http://forum.xda-developers.com/showthread.php?t=784691

Note:
If Installation fails the reason could be because you flashed with PIT 803. Please Reflash JPK using PIT 512.
http://forum.xda-developers.com/show...&postcount=162

------------------------------------------------------------------

USEFULL MODS:

Android Stock Lockscreen: http://forum.xda-developers.com/showthread.php?t=784992
Stop Media Scanning on Boot: http://forum.xda-developers.com/showthread.php?t=753294
Flightspit's Battery Icon Mod: http://forum.xda-developers.com/showthread.php?t=765419
Change System Fonts: http://forum.xda-developers.com/showthread.php?t=735148

------------------------------------------------------------------

HOWTO GET INTO RECOVERY:
- Turn off your Phone
- Hold VOLUME UP + HOME Buttons
- While holding VOLUME UP + HOME Buttons press POWER Button
- If Display goes active, release all Buttons otherwise Phone will do a Reboot-Loop

------------------------------------------------------------------

HOWTO GET INTO DOWNLOAD-MODE:
- Turn off your Phone
- Hold VOLUME DOWN + HOME Buttons
- While holding VOLUME DOWN + HOME Buttons press POWER Button until you reach Download-Mode
- Release all Buttons

------------------------------------------------------------------



------------------------------------------------------------------

Additional Infos:
Discussion: http://forum.xda-developers.com/showthread.php?t=790637
Changelog: http://forum.xda-developers.com/showthread.php?t=791236
Please if my Help was useful!

Phone: Samsung Galaxy S i9000
Kernel: 2.6.32-CM
Firmware: CyanogenMod 6.1 (dev)

Twitter: http://twitter.com/codeworkx
Github: http://github.com/codeworkx

I'll not reply to any kind of PM!
I'm not working for Samsung! If you need support on any Samsung Firmware, call Samsung support!
 
Aery
Old
(Last edited by Aery; 27th September 2010 at 09:10 AM.)
#2  
Senior Member - OP
Thanks Meter 8
Posts: 561
Join Date: Aug 2010

 
DONATE TO ME
Supportet Languages:
  • Bulgarian
  • Cestina
  • Dansk
  • Deutsch
  • English
  • Espanol
  • Francais
  • Hrvatski
  • Italiano
  • Latvian
  • Lithuanian
  • Magyar
  • Nederlands
  • Polski
  • Portugal
  • Romana
  • Slovencia
  • Slovenian
  • Suomi
  • Svenska
  • Türkce
  • Greek
  • Pyccknn
  • Cpnckn
  • Ykpaihcbka
  • Korean

Samsung Keyboard Languages:
  • US/UK English
  • Deutsch
  • Nederlands
  • Polski
  • Francais
  • Italiano
  • Portugal
  • Espanol
  • Türkce
  • Korean

Swype Languages:
  • US/UK English
  • Deutsch
  • Francais
  • Espanol
  • Italiano
  • Nederlands
  • Portugal
  • Polski
  • Turkce
  • Korean
Please if my Help was useful!

Phone: Samsung Galaxy S i9000
Kernel: 2.6.32-CM
Firmware: CyanogenMod 6.1 (dev)

Twitter: http://twitter.com/codeworkx
Github: http://github.com/codeworkx

I'll not reply to any kind of PM!
I'm not working for Samsung! If you need support on any Samsung Firmware, call Samsung support!
 
Fekke
Old
#3  
Fekke's Avatar
Senior Member
Thanks Meter 55
Posts: 444
Join Date: Mar 2008
Location: Stockholm
Waiting for your information
 
captive
Old
#4  
Senior Member
Thanks Meter 9
Posts: 128
Join Date: Dec 2009
Please symlink all busybox commands, it takes no space and makes all apps which need advanced shell commands work without problems..
 
plichtousek
Old
#5  
Member
Thanks Meter 1
Posts: 33
Join Date: Aug 2007
Location: Prague
can i flash via odin with SIM and memory card inserted or should i remove them before flash?
Samsung Galaxy S
 
khsbenny
Old
#6  
Senior Member
Thanks Meter 8
Posts: 421
Join Date: Jun 2009
Location: South Devon
Quote:
Originally Posted by plichtousek View Post
can i flash via odin with SIM and memory card inserted or should i remove them before flash?
You should remove them. I did it once (to JPH) with the sim by accident and it didn't affect it. But I wouldn't risk it!
 
plichtousek
Old
#7  
Member
Thanks Meter 1
Posts: 33
Join Date: Aug 2007
Location: Prague
Quote:
Originally Posted by khsbenny View Post
You should remove them. I did it once (to JPH) with the sim by accident and it didn't affect it. But I wouldn't risk it!
why is it so? i just would like to know, because you don't have to remove them when you flashing with kies

i hate removing the back cover ... :(
Samsung Galaxy S
The Following User Says Thank You to plichtousek For This Useful Post: [ Click to Expand ]
 
nblakqori
Old
#8  
Senior Member
Thanks Meter 3
Posts: 154
Join Date: Jan 2008
Location: Austria
Default flash with odin

hi, i am on jph version (flashed it through kies) applied root and lagfix v2.

how do i proceed flashing jpk from jph?
do i unroot, unlagfix or or?

thanks,
Device History: XDA 2, HTC Touch, HTC Diamond, HTC G1, Iphone 3G, HTC Touch Pro 2, Xperia X10

Current Device: Samsung Galaxy S GT I9000 Froyo 2.2
 
DocRambone
Old
#9  
Recognized Developer
Thanks Meter 2613
Posts: 6,349
Join Date: Jan 2010
Location: Stockholm

 
DONATE TO ME
Kernel broken... Wont install
 
Aery
Old
#10  
Senior Member - OP
Thanks Meter 8
Posts: 561
Join Date: Aug 2010

 
DONATE TO ME
Simply Flash. Doesn't matter if your phone is rootet, lagfixed or not.
Please if my Help was useful!

Phone: Samsung Galaxy S i9000
Kernel: 2.6.32-CM
Firmware: CyanogenMod 6.1 (dev)

Twitter: http://twitter.com/codeworkx
Github: http://github.com/codeworkx

I'll not reply to any kind of PM!
I'm not working for Samsung! If you need support on any Samsung Firmware, call Samsung support!

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


TRENDING IN THEMER...