Originally Posted by shawnfr

I have got to the Malata desktop

Unfortunately I can't get Wifi to work with my WPA2 network. It keeps dropping and showing Error.
I also notice it isn't possible to shutdown...it just starts up again.

I guess you have set the screen resolution higher than the native 1024x600, as I find it hard to read the small aliased fonts? (too old I'm afraid)

I'm going to have to ask the awkward question... as I can't get wifi working, how do I get back to the stock Toshiba ROM?

Looks promising though...

problem is that it still uses stock WPA solution, so it it worked in stock toshiba, it should work here, i did not modify anything here at all.

but ill try and change it to the "wpa_supplicant" which should have much better support for different routers, even N routers, as that problem was found on other phone models , which needed special wpa_supplicant parameter. i guess maybe thats your issue?

but look in post #1 for stock rom, you can roll back with now.. same procedure as always..

PS:
you can also change DPI by changing the parameter in "/system/build.prop" to something higher than 120, originally its 160.

ro.sf.lcd_density=120

to something like 160-240.

@dext3r: I just sent you a PM with the URL of your distro loaded on multiupload

I just finished to update my Folio and now is MALATA
(in italian means sick: then is better to change it :

Originally Posted by roglio

@dext3r: I just sent you a PM with the URL of your distro loaded on multiupload

I just finished to update my Folio and now is MALATA
(in italian means sick: then is better to change it :

Hi roglio, do you have an Italian Folio 100?
Is the tab still in italian after update or is it in english?

Are all google apps working? Even market?

Originally Posted by Dexter_nlb

problem is that it still uses stock WPA solution, so it it worked in stock toshiba, it should work here, i did not modify anything here at all.

but ill try and change it to the "wpa_supplicant" which should have much better support for different routers, even N routers, as that problem was found on other phone models , which needed special wpa_supplicant parameter. i guess maybe thats your issue?

but look in post #1 for stock rom, you can roll back with now.. same procedure as always..

PS:
you can also change DPI by changing the parameter in "/system/build.prop" to something higher than 120, originally its 160.

ro.sf.lcd_density=120

to something like 160-240.

I tried many things but still my wifi connexion not working, I made a factory recet, wipe every things no way, there is any solution to reinstall a new clean system please step by step. I need HELP.

Mounting as USB Storage not working

---

Dexter_nlb: once the Folio is connected via USB to the PC storage is not mounted as USB storage ...

Thank you a lot Mr.Dev
As soon as there are more improvements I will certainly update

I think the SD and the internal storage ought to be swapped round, otherwide the default storage location is to SD, rather than the internal 12 GB drive. At the moment, I gon't seem to get USB storage mounted either (it is detected though in dmesg)

Originally Posted by Dexter_nlb

problem is that it still uses stock WPA solution, so it it worked in stock toshiba, it should work here, i did not modify anything here at all.

but ill try and change it to the "wpa_supplicant" which should have much better support for different routers, even N routers, as that problem was found on other phone models , which needed special wpa_supplicant parameter. i guess maybe thats your issue?

but look in post #1 for stock rom, you can roll back with now.. same procedure as always..

PS:
you can also change DPI by changing the parameter in "/system/build.prop" to something higher than 120, originally its 160.

ro.sf.lcd_density=120

to something like 160-240.

Thanks
I should say I just got the wifi to coonnect and Market works... and GMail!

So if I was coming over as a complainer...I shouldn''t. Really impressive what you have managed to do in such a short period of time!

I'm sticking with your ROM I am using the Folio to tyoe this....

Like the others, I don't appear to have any storage mounted,so could't dowload the daily Fennec build...

Originally Posted by pirkner

Dexter_nlb: once the Folio is connected via USB to the PC storage is not mounted as USB storage ...

hmm, strange thing.. if i disconnect charger, it works fine here..?
but yes without charger its not showing up on pc..

maybe related to the "adb" being enabled, ill check up on this,...

i still feel it require more testing, as the Nvidia build is not made for our slate, so maybe just some toshiba guys could perfect the new egl, and we got a better rom.
which again i would mod, with stock android.

Originally Posted by tshoulihane

I think the SD and the internal storage ought to be swapped round, otherwide the default storage location is to SD, rather than the internal 12 GB drive. At the moment, I gon't seem to get USB storage mounted either (it is detected though in dmesg)

ill look into this.. im coming from android phones, so many apps and i, are used to sdcard being replaceable and the one shared to pc as well.

ill see what can be done, its btw, easy to swap..
ill write a note on it later, as just 2 files in the build will correct what system thinks is "external".