[Q] How to flash with original firmware

---

Hi all. I would like to know how to reflash original firmware for my phone. It seems I messed it up when I tried flashing a new recovery through fastboot. Now it just shows the LG logo then turns right off when turned on. I can still enter Emergency mode, so I can probably reflash it with the original firmware. If you guys have a better idea please let me know.

search for kz updte

Originally Posted by arvinoids

Hi all. I would like to know how to reflash original firmware for my phone. It seems I messed it up when I tried flashing a new recovery through fastboot. Now it just shows the LG logo then turns right off when turned on. I can still enter Emergency mode, so I can probably reflash it with the original firmware. If you guys have a better idea please let me know.

For steps how-to looks here
For KDZ updater search KDZ_FW_UP on google

For list of fw, try look here. Few pepople report, that have some problems. If you didn't find what you search for, just try download FW from other nearest country.

Hi, can someone please help to upload the SEA firmware ? There seems to be a problem downloading it from lgmobile

http://forum.xda-developers.com/show...51&postcount=1

Usethis rom for 10C
csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ASEABK/V10c_00/V10C_00.kdz
(SEA)

Verify if you have access into port 9002.

Originally Posted by The_ERROR

http://forum.xda-developers.com/show...51&postcount=1

Usethis rom for 10C
csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ASEABK/V10c_00/V10C_00.kdz
(SEA)

Verify if you have access into port 9002.

I can't seem to load that page. How do I verify for port access 9002?

I tested it just minute before, so I'm sure, that it works.

Test:
Start -> Run... -> cmd
in command line enter:
telnet csmg.lgmobile.com 9002 - brobably you get following:

...>telnet csmg.lgmobile.com 9002
Connecting To csmg.lgmobile.com...Could not open connection to the host, on port
9002: Connect failed

1) Try switch off firewall
2) Find some free proxy on internet and use it for proxying of connection
3) I try prepare this for you (I'm on work and here port 9002 is not allowed, so I have to download it remotely through my router at home and I have slow speed connection )

Thanks alot ! it's working now! using 3g to download via tethering on iphone!

Originally Posted by adrianghaust

Thanks alot ! it's working now! using 3g to download via tethering on iphone!

Fine!! You are welcome!

Originally Posted by The_ERROR

For steps how-to looks here
For KDZ updater search KDZ_FW_UP on google

For list of fw, try look here. Few pepople report, that have some problems. If you didn't find what you search for, just try download FW from other nearest country.

i have the exact same problem !!!!!!!! you fixed yours ??? how ?!?!? plz help me !!!!!