[Q] White color issue

---

Hello everyone.
I'm focus user, today I find White color issue on the fisrt pixel line from left of screen (see picture).

(I can't post picture)

farm6.static.flickr.com/5247/5289192085_dcb768a355_z.jpg


Are someone has same issue? and how to fix it? thank you very much.

sorry for my bad english

The best I could to to check mine was to open up my email. The whole screen is white. I did not see anything except white along the edge.

Originally Posted by wildbilll

The best I could to to check mine was to open up my email. The whole screen is white. I did not see anything except white along the edge.

thank you very much.
please try in LCD Test(*#0*# in Diagnostic Mode) select RED you will see a white border but on my device left-border is green (other sides are OK).

It's very hard to be absolutely sure on red, but on blue and green the edges are definitely all white.

Originally Posted by wildbilll

It's very hard to be absolutely sure on red, but on blue and green the edges are definitely all white.

thank you.

It is green on the left side of mine, some its more subtle, others its still obviously green.

thank you.
I test again on black image with 1 pixel white border.
this is result you can see green color on left side (top in picture).
farm6.static.flickr.com/5281/5291981589_e82aa1dfef_z.jpg

this is test image.
farm6.static.flickr.com/5007/5291981623_11340868b6_b.jpg

I loaded your JPG onto my Focus and the left side is green. The left side is always green, but the right side and even the top and bottom can also appear green if you hold the phone at certain angles. The green can also appear purple at extreme angles.

Is this a manufacturing flaw, or just a characteristic of AMOLED screens? Could it be some sort of back-lighting source that's located along the left edge that's causing the green tint?

I loaded the picture after downloading it and then attaching it to an email.
It does have a strange tint on the left side.

I then created my own version of the image. I started with a 480 x 800 blank image in Photoshop. I filled the entire image with black at 100% opaque.
Then I stroked the outer edge with 1 pixel of white. I repeated this using 2 pixels and then 3 pixels. As you can see, it is still visible at 3 pixels, but it is starting to turn white. I think we are seeing a consistent result that means the AMOLED screens have a slight design problem that is not considered to be worth holding back this technology from the market. I know I like the display and this is minor.