Post Reply

[APP] WiMoSpeed: [2011-09-20] V1.09

25th December 2010, 09:40 PM   |  #1  
OP Senior Member
Thanks Meter: 249
 
143 posts
Join Date:Joined: Oct 2008
CAUTION !!!
- USE THIS TOOL AT YOUR OWN RISK !!
- Overclocking your cpu may damage your device.
- Before autostarting the app be sure that your device will not hang.
- backup is always recommended !!
DESCRIPTION :
WiMoSpeed lets you change the CPU-speed. In opposite to other tools, even to the predecessor OverClockTool (OCT), it manipulates the values WM uses for clock control. So it works reliable on battery and AC without any scripting or active components.
USAGE :
- WiMoSpeed needs .NET CF 3.5
- Download and install the CAB
- Start WiMoSpeed.exe. If it reports that it cannot identify your ROM: read LIMITATIONS/PROBLEMS
- Select Speed
- Set Speed
- Exit WiMoSpeed.exe
- Your device still runs with speed you set


Auto start WiMoSpeed to desired speed:
Note: one advantage to installing WiMoSpeed to storage card is that if device ever won't boot at new speed, the card can be removed and the device will boot at original speed.
  1. MOST IMPORTANT: Ensure WinMoSpeed will function safely on your device at desired speed by using it for several days while setting the speed manually.
  2. Run WiMoSpeed, set to desired speed, click "create link with current settings". This will create a lnk file under the install directory, usually "/Program Files/WiMoSpeed" or "/Storage Card/Program Files/WiMoSpeed".
  3. Copy that lnk file to the "/Windows/Start Up" folder.
  4. Reboot device.
  5. Run WiMoSpeed to verify "current CPU speed" is correct.
LIMITATIONS / PROBLEMS
I am working on this in my spare time, beside my job, my mate and some other interest. I own a Rhodium-device only, so I can not reproduce errors on other devices and debugging is very difficult and time-consuming. Be patient.

WiMoSpeed supports Qualcomm MSM7200 (and compatible) and is actually limited to ROMs of
  • Rhodium,
  • RhodiumW
  • Topaz
  • Blackstone
  • Whitestone / Imagio
  • Raphael / Fuze
  • Diamond
  • Kovsky / Xperia
  • Quartz
  • Pure
  • test (!) support for Jade, Panther, Mega and Rose

!!! If you have a device listed above and WiMoSpeed could not identify your ROM please post here what part of your ROM WiMoSpeed couldn't identify (OEMXIP and / or RADIO-ROM) and include a download-link of your ROM (OS, RADIO) !!! Otherwise I will ignore your post. Thank you.

If you are going to report an error please include the ROM identification of WiMoSpeed shown in the GUI (e.g. OS "Rhod016 / PLL2", Radio "4.49.25.91")
TECHNIQUE
Basically WiMoSpeed is hardware-independent, because it lets WM change clock speed. But I couldn't get WM to switch the clock reliable on request so WiMoSpeed had to switch the clock registers itself on setting a new speed.
Therefore WiMoSpeed depends on CPU-hardware, RADIO- and OS-ROM.

Raising or lowering cpu speed didn't change battery drain or device temperature noticeable. So there isn't dynamic clocking in WiMoSpeed, but WM is still controlling and changing cpu-speed on battery.
thanks to
-all donators for the support
-eboelzner for Sense UI SDK
-dmvandijk for the icon
-the internet
TODO-LIST
  • ?

Support for
  • non-HTC MSM7200/7201
  • non-MSM7200/7201
devices is uncertain.
Please do not mirror WiMoSpeed !

Version 1.09
- added support for more OEMXIPs (1xRhodium, 1xTopaz, 1xRaphael)
- added support for more radios (1.11.30F, 3.54.25.25, 1.20.OliNex)
- PINVOKE error should be solved (moved to another compiler)

- test (!) support for Jade, Panther, Mega, Rose and Radios

Version 1.08
- added support for more OEMXIPs (1 x Diamond, 1 x Blackstone)
- added support for more RADIOs (0.93.25.NS16, 1.02.25.32, 1.10.25.18, 1.11.25.71, 1.11.25.76)

Version 1.07 (3.233 views)
- set os-versions in CAB-Information-File, maybe it solves installation problems
- added support for more OEMXIPs (1 x Topaz, 1 x Blackstone)
- added support for more RADIOs (1.02.25.28)

Version 1.06 (6.000 views)
- checks ROM-identification at startup
- support for Pure
- added support for more OEMXIPs
- added support for more RADIOs

Version 1.05
- support for Quartz
- added support for more OEMXIPs
- added support for more RADIOs

Version 1.04
- blackstone problem should be solved now (tested by tsalta with Blac016 / 1.17.25.09)
- added support for more ROMs
- support for Raphael / Fuze, Diamond, Kovsky / Xperia
- GUI shows ROM identification

Version 1.03
- blackstone problem (speed cut in half after sleep) should be solved
- added support for more ROMs
- changes in GUI (you have to create your links again; old ones starts the GUI only)

Version 1.02
- added support for more devices
- added support for more ROMs

Version 1.01
- added support for more OS-ROMs
- added support for more radio-ROM
- new function: restore default speed (528 MHz)

Version 1.00
- Initial release
- Rhodium, RhodiumW
Attached Files
File Type: cab WiMoSpeed_V1.08.CAB - [Click for QR Code] (711.3 KB, 11325 views)
File Type: cab WiMoSpeed_V1.09.CAB - [Click for QR Code] (702.2 KB, 13217 views)
Last edited by iwfratz; 20th September 2011 at 07:34 AM. Reason: version 1.09 released
The Following 82 Users Say Thank You to iwfratz For This Useful Post: [ View ]
25th December 2010, 09:41 PM   |  #2  
OP Senior Member
Thanks Meter: 249
 
143 posts
Join Date:Joined: Oct 2008
radios
  • 0.93.25.NS16
  • 1.00.25.03, 1.00.25.05, 1.00.25.07, 1.00.25.08, 1.00.25.16
  • 1.02.25.11, 1.02.25.19, 1.02.25.28, 1.02.25.32
  • 1.02.35.31
  • 1.08.25.08, 1.08.25.20
  • 1.09.25.07, 1.09.25.08, 1.09.25.14, 1.09.25.23, 1.09.25.23M, 1.09.25.35
  • 1.10.25.18, 1.10.25.25
  • 1.11.25.01, 1.11.25.71, , 1.11.25.76, 1.11.30F
  • 1.12.25.16, 1.12.25.16D3, 1.12.25.16DE, 1.12.25.19
  • 1.13.25.24, 1.13.25.55
  • 1.14.25.05, 1.14.25.24, 1.14.25.35, 1.14.25.55
  • 1.15.25.14, 1.15.25.55
  • 1.16.25.48
  • 1.17.25.09
  • 1.20.OliNex
  • 1.40.00WF
  • 1.87.00WV
  • 1.88.07WV
  • 1.92.00WV
  • 1.96.00WF
  • 2.05.00WV, 2.05.75WVL
  • 2.18.00WV, 2.18.02WV
  • 2.21.00WV
  • 2.23.00WV
  • 2.25.00WVL, 2.25.02.WVL
  • 2.30.00WV
  • 2.32.00WF, 2.32.00WU
  • 2.35.00WV
  • 2.37.00WV
  • 2.49.25.204
  • 3.43.25.19, 3.43.25.19DE
  • 3.44.25.27
  • 3.45.25.14, 3.45.25.21
  • 3.46.25.18, 3.46.25.30
  • 3.54.25.25
  • 4.46.25.24
  • 4.47.25.24
  • 4.48.25.20
  • 4.49.25.05, 4.49.25.17, 4.49.25.57, 4.49.25.77, 4.49.25.88, 4.49.25.91, 4.49.25.94, 4.49.25.95
  • 1.96.10WU
  • 2.23.00WU
  • 2.32.00WU
Last edited by iwfratz; 20th September 2011 at 07:36 AM.
The Following 17 Users Say Thank You to iwfratz For This Useful Post: [ View ]
25th December 2010, 09:41 PM   |  #3  
OP Senior Member
Thanks Meter: 249
 
143 posts
Join Date:Joined: Oct 2008
reserved for the OP
Last edited by iwfratz; 11th February 2011 at 02:54 PM.
The Following 8 Users Say Thank You to iwfratz For This Useful Post: [ View ]
25th December 2010, 09:42 PM   |  #4  
OP Senior Member
Thanks Meter: 249
 
143 posts
Join Date:Joined: Oct 2008
last one reserved for the OP
The Following 5 Users Say Thank You to iwfratz For This Useful Post: [ View ]
25th December 2010, 11:43 PM   |  #5  
Erbid's Avatar
Member
Thanks Meter: 1
 
39 posts
Join Date:Joined: Dec 2007
More
Downloading now
I just installed 1.01 and am loving it. Will try 1.02 shortly.

I was in search of the shortcuts created to switch speeds, and can see they should be next to the .exe file. The first post has the info I needed.

Hope to learn more, but this looks very good to me!

Erbid
26th December 2010, 01:38 AM   |  #6  
mmalka's Avatar
Senior Member
Flag On the web
Thanks Meter: 99
 
952 posts
Join Date:Joined: Jan 2008
More
Thank you!
I would like to be one of the first in this thread to congratulate and thank iwfratz for the outstanding tool.
26th December 2010, 03:40 AM   |  #7  
Mang's Avatar
Member
Thanks Meter: 0
 
35 posts
Join Date:Joined: Apr 2008
More
Thumbs up
my tp2 now run faster & stable at 748.8Mhz
kwbr Rhodium version 2.2
radio 4.49.25.17


Update!!
change radio to 4.49.25.57 & run at 768Mhz almost a day without SOD.
Thank Iwfratz for your hard work!
Last edited by Mang; 27th December 2010 at 08:28 AM.
26th December 2010, 05:47 AM   |  #8  
5318008's Avatar
Senior Member
Flag Portland, OR
Thanks Meter: 61
 
409 posts
Join Date:Joined: Aug 2009
More
Hopefully more people will come over from the thread for NetRipper's app, try this out, and shoot you some of that bounty money.
26th December 2010, 08:05 AM   |  #9  
Member
Thanks Meter: 2
 
86 posts
Join Date:Joined: Apr 2007
Great app, running steady @ 768MHz
Never reached that speed before with OCT.
Just couldn't find the 528MHz button until I saw ur just supposed to click "down" 40 times lol
26th December 2010, 10:14 AM   |  #10  
Senior Member
Thanks Meter: 4
 
306 posts
Join Date:Joined: Aug 2005
More
Quote:
Originally Posted by iwfratz

TECHNIQUE
... So there isn't dynamic clocking in WiMoSpeed, but WM is still controlling and changing cpu-speed on battery.

Does this mean that overclock is applied on AC only while WM restores normal (528 MHz) CPU speed on battery ?

Moreover, OCT was a device driver and it checked the CPU speed continuosly (or so I suppose). WiMoSpeed seems to set CPU speed only when run and then leave the CPU to itself (or to WM).

I'm confused

Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes