[GUIDE]Unbrick your X10 or X10i/X10a when you lose access to Xrecovery, SEUS etc.
So, you've broken a rom and xRecovery wont start? Given up... dont!
I suppose it has pretty much every other use case.
Without futherado heres the guide:
All you need to do is in 7 easy steps.
What you Need:
A Stock Rom FTF file (for now)
If you are not sure download the GENERIC version for your device.
1: Unzip Flashtool
to your desktop
2: Place ftf rom file
, Click the Flash
button and select the Firmware you downloaded.
Originally Posted by Helpful Hint
Be Sure that your phone is off before connecting in flashmode, or it wont turn green.
When Prompted to connect your phone in flashmode. Hold
the back button
, and plug your phone in
to the computer to connect in FlashMode. The LED will go green, if it doesn't, turn your phone off again and try again
! or come here for help.
If you receve an error, please open the 'drivers' folder (%desktop%/flashtool/drivers/) and run the exe file. to install the flash driver, once installed. try step 3-5 again!
6: Wait 15 minutes. Make yourself a coffee or beer
7: Now your phone should be stock. You should be crying and happy at the same time.
BONUS STEP: for easy root, turn on phone and open flash tool (connect phone.) and press ROOT (make sure you have USB Debugging enabled)
If this helps you, comment confirm and thanks