Doubt About Flashing to 2.2

---

Hi, im about to flash my i5800 to 2.2, but came what i think is a simple question : the firmware rar, come with 4 md5 files,
I5800OXXJPF-CSC-MULTI-OXX.tar.md5
I5800XXJP4_PHONE.tar.md5
I5800XXJPF-REV02-Bootloader-low-CL794643.tar.md5
I5800XXJPF-REV02-PDA-CL794643.tar.md5

Well, on the tutorial, says to use the "one Package" option, should i load the PDA file on it?

thanks

No. Do not use one package option. JPF firmware released diffrently. You need to rename all 4 files to remove .md5. Then select individual files ODIN.

Do not use one package option

load individual files by pressing the BOOT, PHONE, PDA, CSC buttons.

Renaming is not required

odin downloader crashed in middle of upgrading and now my phone is not starting up .
Power button and other combo button are also not working help me

Originally Posted by akss009

odin downloader crashed in middle of upgrading and now my phone is not starting up .
Power button and other combo button are also not working help me

Did you also select the bootloader? If yes, then there is a possibility of bricking?

Try the following:
1. Remove battery
2. press and hold the power button for 15-20 seconds
3. Put in the battery
4. Press volume down + home + power key

This should take you to download mode. If it does, select all files one by one except bootloader. Also do not remove extension .md5. Odin will automatically check it.

Uncheck protect ops and upgrade.

If this fails, I dont have an idea. if someone else can help you it will be great else you will need to visit samsung service center. Act like you dont know anything

well wait, are you saying i should NOT use the bootloader? thanks for all the help guys, i just want to know that nothing goes wrong
so, on odin, i will put :

Boot: NONE
Phone: I5800XXJP4_PHONE.tar.md5
PDA: I5800XXJPF-REV02-PDA-CL794643.tar.md5
CSC: I5800OXXJPF-CSC-MULTI-OXX.tar.md5
EPS: None

is that right or should i put I5800XXJPF-REV02-Bootloader-low-CL794643.tar.md5 on boot option?
thanks again

Originally Posted by infestedd

is that right or should i put I5800XXJPF-REV02-Bootloader-low-CL794643.tar.md5 on boot option?

There's no need to reflash the bootloader. It, however, minimizes the risk of bricking your device if you don't.

ok, really thanks, hope thats all i need to know, since there is no specifc tutorial for jpf

guys really thanks for everything, everything is running perfect, on my first attempt
thanks and screw samsung wth the official update lol!