Attend XDA's Second Annual Developer Conference, XDA:DevCon 2014!
5,739,676 Members 51,489 Now Online
XDA Developers Android and Mobile Development Forum

25/5/11 DefiniteGuide: How to Install NAND Android on HTC HD2 w ClockWorkMod Recovery

Tip us?
 
gunjahman
Old
(Last edited by gunjahman; 25th May 2011 at 01:47 PM.) Reason: updating info
#1  
gunjahman's Avatar
Member - OP
Thanks Meter 155
Posts: 82
Join Date: Jan 2011
Cool 25/5/11 DefiniteGuide: How to Install NAND Android on HTC HD2 w ClockWorkMod Recovery

After a lot of reading, I collect the following, just for my own aid. I hope it will be proved useful to others.
I' ve just gathered all this information. All thanks goes to all those nice guys that spend time & put effort to find out all these procedures.
I'm just a bug.

(A few posts after this one, in the same thread, you can find the following guides:

How to Install NAND Android on HTC HD2 WITHOUT ClockWorkMod Recovery
&
FLASHING A NEW NAND ANDROID ROM OVER A PREVIOUS ONE (without clockwork mod)
&
FLASHING A NEW NAND ANDROID ROM OVER A PREVIOUS ONE (with clockwork mod)

At the end of this post you can find the neccessary files to download.

So here it is:

How to Install NAND Android on HTC HD2 with ClockWorkMod Recovery

(updated 25 May 2011)



Prerequisites

HSPL3 ~ SPL-2.08.HSPL or HSPL4 (Better use HSPL3. HSPL4 still has issues or errors on some devices, so use it at your own risk).
Radio that support 576 RAM (ex. radio ROM 2.15)
DFT MAGLDR Bootloader
ClockworkMod Recovery


It's advisable to copy the NAND Android ROM zip file to the root of your SD card, before start, because some people face problems to do this after doing the first steps of the process. If you don't do it then you can do it later using a card reader or doing this:

In MAGLDR choose option: #4 USB Mass Stg
or
In CWM choose option: mounts and storage option


Make sure that you have all the prerequisites installed.
STEPS:
A1: Install HSPL3
or
A2: Install HSPL4
(HSPL4 still has issues or errors on some devices, so use it at your own risk).
B: Install radio ROM 2.15
C: Install MAGLDR on HTC HD2
D: Install ClockworkMod Recovery
(2 methods, choose the one you like)
E: Install NAND Android on HTC HD2 with ClockWorkMod Recovery


A1: Install HSPL3

Prerequisites

* Windows Mobile Device Center installed on Windows Vista / Windows 7 or
* ActiveSync installed on Windows XP
* You must have any SPL version from this list on your device:
o SPL 1.42.0000
o SPL 1.62.0000
o SPL 1.66.0000
o SPL 2.07.0000
o SPL 2.08.0000
o SPL 2.10.0000
(To check your SPL version, hold the Volume Down button and do a reset)
You should have this SPL version unless you are using the latest 3.14 ROM with SPL 3.03.0000. No worry, just downgrade your Windows Mobile ROM from v3.14 to v1.66 will do. Download HTC HD2 v1.66 ROM. Then downgrade your phone from SPL 3.03.0000 to SPL 1.42.000.

Step by Step Guide

1. Power off your phone.
2. Press volume down button (don’t let go) and power on your phone.
3. It will load into bootloader.
4. You should get ‘Red, Green, Blue and White’ screen with SPL-1.42.
5. Take off the battery.
6. Power on your phone.
7. Connect USB cable from PC to phone after Windows Mobile loaded.
8. Select ‘ActiveSync’ and click ‘Done’.
9. Open HSPL3_PKG.zip with 7-Zip.
10. Copy HSPL3_PKG.exe to desktop.
11. Execute HSPL3_PKG.
12. Follow onscreen instructions to install.
13. Click ‘Yes’ if User Access Control prompt up.
14. Bootloader will be loaded with USB status during starting of installation.
15. Select ’2.08.HSPL’ to install.
16. After installation, you should see ‘We hacked it!’ on your phone.
17. Click on ‘Yes’ and your phone should be rebooted and load into Windows Mobile.
18. Disconnect USB cable from phone.
19. To verify, power off your phone.
20. Press volume down button (don’t let go) and power on your phone.
21. It will load into bootloader.
22. You should get ‘Red, Green, Blue and White’ screen with SPL-2.08.HSPL.
23. That’s all.

OR

A2: Install HSPL4 (HSPL4 still has issues or errors on some devices, so use it at your own risk).

Prerequisites

* Windows Mobile Device Center installed on Windows Vista / Windows 7 or
* ActiveSync installed on Windows XP
* You must have any SPL version from this list on your device:
o SPL 1.42.0000
o SPL 1.62.0000
o SPL 1.66.0000
o SPL 2.07.0000
o SPL 2.08.0000
o SPL 2.10.0000
o SPL 3.03.0000 (for those using latest official HTC HD2 ROM v3.14)

(To check your SPL version, hold the Volume Down button and do a reset)

HSPL4 includes SPL-2.08.0000, SPL-2.08.HSPL, SPL-3.03.0000 and SPL-3.03.HSPL. The 3.03 SPL supports LEO1024.
You still need to use SPL-2.08.HSPL to use NAND Android and Windows Phone 7 and MAGLDR.
Make sure that you select the correct HSPL for your ROM installation.


Step by Step Guide

1. Power off your phone.
2. Press volume down button (don’t let go) and power on your phone.
3. It will load into bootloader.
4. You should get ‘Red, Green, Blue and White’ screen with SPL-1.42.
5. Take off the battery.
6. Power on your phone.
7. Connect USB cable from PC to phone after Windows Mobile loaded.
8. Select ‘ActiveSync’ and click ‘Done’.
9. Open HSPL4.zip with 7-Zip.
10. Copy HSPL4.exe to desktop.
11. Execute HSP4.
12. Follow onscreen instructions to install.
13. Click ‘Yes’ if User Access Control prompt up.
14. Bootloader will be loaded with USB status during starting of installation.
15. Select 2.08HSPL or 3.03HSPL. (This is to prevent people with 1024LEO's installing an incompatable version and bricking their device).
16. Click next
17. When its finished the phone should be rebooted and load into Windows Mobile.
18. Click ok to terminate program
19. Disconnect USB cable from phone.
20. To verify, power off your phone.
21. Press volume down button (don’t let go) and power on your phone.
22. It will load into bootloader.
23. You should get ‘Red, Green, Blue and White’ screen with SPL 2.08 or 3.03.
24. That’s all.


B: Install Custom Radio ROM

Prerequisites

* HSPL3 ~ SPL-2.08.HSPL

In order to flash custom radio ROM, you need to have HSPL3 installed on your HTC HD2. By the way, I used Radio Leo 2.15.50.14 on my guide. You can use it or any other HTC HD2 Radio ROM version.

HTC HD2 has 576 MB physical RAM but was reduced by software to 512 MB only. And custom Windows Mobile ROM + radio 2.07 or above can unlock it to be 576 MB again. Certain custom Windows Mobile ROM need higher radio version than your phone. And NAND Android requires it too. So you need to install custom radio ROM (if you don’t have the correct radio version).

Step by Step Guide

1. Power off your phone.
2. Press volume down button (don’t let go) and power on your phone.
3. It will load into bootloader.
4. You should get ‘Red, Green, Blue and White’ screen with SPL-2.08.HSPL.
5. Take off the battery.
6. Power on your phone.
7. I have R 2.06.51.07 at bottom of the screen with green HTC Logo.
8. Connect USB cable from PC to phone after Windows Mobile loaded.
9. Select ‘ActiveSync’ and click ‘Done’.
10. Open Radio Leo 2.15.50.14.rar with 7-Zip.
11. Copy CustomRUU.exe and RUU_signed.nbh to desktop.
12. Execute CustomRUU.
13. Click ‘Yes’ if User Access Control prompt up.
14. Follow onscreen instructions to install.
15. Bootloader will be loaded with USB status during starting of installation. (~10 minutes)
16. Phone will be rebooted after installation finished.
17. You should have R 2.15.50.14 at bottom of the screen with green HTC Logo.
18. Disconnect USB cable from phone.
19. That’s all.

C: Install MAGLDR

In order to install NAND Android on HTC HD2, you must install DFT MAGLDR Bootloader first. And the good news ~ both LEO512 and LEO1024 are supported. This means US T-Mobile HD2, Europe, Asia and the rest of the world’s HTC HD2 are supported.

Note – by installing MAGLDR, you cannot boot into Windows Mobile anymore. So everything on your phone is gone…

Prerequisites

* HSPL3 ~ SPL-2.08.HSPL
* Radio that support 576 RAM

No worry, Android on NAND is working. That’s the reason we install DFT MAGLDR Bootloader on our HTC HD2, right? And we will be able to load the latest Windows Phone version (if we are crazy...) when the ROM comes out. Okay, let’s get started. If you don’t have HSPL3, please install it first. And aslo install radio ROM 2.15.

Step by Step Guide

1. Power off your phone.
2. Press volume down button (don’t let go) and power on your phone.
3. It will load into bootloader.
4. You should get ‘Red, Green, Blue and White’ screen with SPL-2.08.HSPL.
5. Take off the battery.
6. Power on your phone.
7. You should have R 2.15.50.14 at bottom of the screen with green HTC Logo.
8. Connect USB cable from PC to phone after Windows Mobile loaded.
9. Select ‘ActiveSync’ and click ‘Done’.
10. Open DFT_LEO_MAGLDR113.rar with 7-Zip.
11. Copy MAGLDR113 folder to desktop.
12. Enter MAGLDR113 folder.
13. Execute ROMUpdateUtility.
14. Click ‘Yes’ if User Access Control prompt up.
15. Follow onscreen instructions to install.
16. Bootloader will be loaded with USB status during starting of installation.
17. Phone will be rebooted after installation finished.
18. DFT MAGLDR Bootloader will be loaded then.
19. Disconnect USB cable from phone.
20. That’s all.

D: How to Install ClockworkMod Recovery on HTC HD2

Prerequisites

HSPL3 ~ SPL-2.08.HSPL
Radio that support 576 RAM
DFT MAGLDR Bootloader

Please make sure that you have all the prerequisites installed.
If you don’t have HSPL3, please install it.
Also install radio ROM 2.1.
Finally, install DFT MAGLDR Bootloader.

There are two methods. They are both working. Choose the one you like.

Method 1

Step by Step Guide

1. Power on your phone and don’t let go power button.
2. DFT MAGLDR Bootloader will be loaded.
3. Use volume down button to go down to 4. USB MassStg.
4. Then press call button to enter USB Mass Storage mode.
5. Connect USB cable from PC to phone.
6. At PC, open Removable Disk (SD card storage).
7. Create a temp folder.
8. Open ClockworkMod-Recovery V.1.2 with 7-Zip.
9. Copy everything to temp folder.
10. Enter temp folder.
11. Enter copy_to_sd_root folder.
12. Copy initrd.gz and zImage files to SD card root level.
13. Then disconnect USB cable from phone.
14. Press power button to go back.
15. Use volume down button to go to 11. Reset.
16. Then press call button.
17. Press power button and don’t let go.
18. DFT MAGLDR Bootloader will be loaded.
19. Use volume down button to go down to 5. USB Flasher.
20. Then press call button to load Android Flasher mode.
21. Connect USB cable from PC to phone.
22. At PC, right click on DAF and select ‘Run as administrator’.
23. Click ‘Yes’ if User Access Control prompt up.
24. Follow onscreen instructions to install.
25. Phone will be rebooted after installation finished.
26. DFT MAGLDR Bootloader will be loaded then.
27. Disconnect USB cable from phone.
28. Press call button to load 2. Boot AD SD.
29. ClockworkMod Recovery will be loaded then.
30. That’s all.

Alternatively, there exist a faster method, from MAGLDR NAND Boot. It goes like this:

Method 2

Step by Step Guide

1. Download recovery with partition size for the type of rom you plan on using (150, 250 or 400) (to choose, see the guide at the bottom of this post).
2. Extract downloaded file
3. Go into MAGLDR and choose 5. USB Flasher.
3. On PC run DAF.exe and follow instructions
4. After installation completed and phone reboots, hold power key and select 8. AD Recovery
5. The phone will load into Recovery
6. That’s all.

E: Install NAND Android on HTC HD2 with ClockWorkMod Recovery

Install NAND Android on HTC HD2 with ClockworkMod Recovery is the 2nd method to have NAND Android on HTC HD2. And this can be done by using SD card only without PC. Just download the zip ROM to your SD card and you are ready to go. In addition, you can backup and restore ROM using Nandroid. Or you can try the 1st method through DFT MAGLDR Bootloader which requires PC with USB connection.

Prerequisites

HSPL3 ~ SPL-2.08.HSPL
Radio that support 576 RAM
DFT MAGLDR Bootloader
ClockworkMod Recovery


Having NAND Android on HTC HD2 is not a simple task like ABC. But it is not mission impossible too. Just follow these guides to get all the prerequisites installed. Please install HSPL3. Install Custom Radio ROM 2.15. Then, install DFT MAGLDR Bootloader. Finally, install ClockworkMod Recovery. Wow… Lot of steps but worth it. Trust me…

Step by Step Guide

1. Power on your phone and don’t let go power button.
2. DFT MAGLDR Bootloader will be loaded.
3. Use volume down button to go down to 4. USB MassStg.
4. Then press call button to enter USB Mass Storage mode.
5. Connect USB cable from PC to phone.
6. At PC, open Removable Disk (SD card storage).
7. Open your favorite ROM (ex. JawsMIUIrec1.0.7z) with 7-Zip.
8. Copy .data folder and ex. JawsNandRec1.1.zip to SD card root level.
9. There should be config and data files in .data folder.
10. Then disconnect USB cable from phone.
11. Press power button to go back.
12. Use volume up button to go up to 12. PowerDown.
13. Then press call button.
14. Power on phone and don’t let go power button.
15. DFT MAGLDR Bootloader will be loaded.
16. Press call button to load 2. Boot AD SD.
17. ClockworkMod Recovery will be loaded then.
18. Use volume down button to go down to ‘install zip from sdcard’.
19. Then press call button.
20. Use volume down button to go down to ‘choose zip from sdcard’.
21. Then press call button.
22. You should see ex. JawsNandRec1.1.zip.
23. Then press call button to select it.
24. Use volume down button to go down to ‘Yes – ex. JawsNandRec1.1.zip’.
25. Press call button and installation will be started.
26. When you see ‘Install from sdcard complete’, press power button.
27. Press call button to select ‘reboot system now’.
28. Phone will be rebooted and enter NAND Android automatically.
29. Follow onscreen instructions to setup Android settings.
30. That’s all.

Good Luck

Just below are the files where you can download directly, exept for the radio, that you can get it here: Radio Leo 2.15.50.14

(If you are going for the 2nd method of ClockWorkMode, then depending on what type of roms you plan on using, you should download the partition size based on the following:
  • 150MB Partition - For bare roms including CyanogenMod, AOSP, and MiUI
  • 250MB Partition - For Standard sense roms including Desire and EVo based ROMs, can also be used for some squashed HD builds
  • 400MB Partition - For Larger roms including unsquashed Desire HD and Z roms, ROMs REQUIRE data2sd for EU HD2 with 512MB NAND)
Attached Files
File Type: 7z HSPL3_PKG.7z - [Click for QR Code] (655.2 KB, 17467 views)
File Type: 7z MAGLDR113.7z - [Click for QR Code] (530.4 KB, 17884 views)
File Type: 7z Recovery_150M.7z - [Click for QR Code] (3.80 MB, 12431 views)
File Type: 7z Recovery_250M.7z - [Click for QR Code] (3.80 MB, 15697 views)
File Type: 7z Recovery_400M.7z - [Click for QR Code] (3.80 MB, 14006 views)
File Type: 7z ClockworkMod-Recovery1.2.7z - [Click for QR Code] (3.80 MB, 17073 views)
File Type: zip HSPL4.zip - [Click for QR Code] (1.41 MB, 7056 views)
The Following 114 Users Say Thank You to gunjahman For This Useful Post: [ Click to Expand ]
 
DirkGently
Old
(Last edited by DirkGently; 3rd February 2011 at 08:30 AM.)
#2  
DirkGently's Avatar
Senior Member
Thanks Meter 1480
Posts: 9,470
Join Date: May 2009
Well played sir and thanks for putting in the time to write this guide. Perhaps a passing mod would care to sticky this, either here or in a HD2 forum?

BTW, have an E-cookie for what is probably the best 1st post i've ever seen here
The Following 2 Users Say Thank You to DirkGently For This Useful Post: [ Click to Expand ]
 
Archer
Old
#3  
Archer's Avatar
Senior Moderator / Recognized Developer - (Un)Recognized Pole Dancer
Thanks Meter 3952
Posts: 13,646
Join Date: Jul 2008
Location: Northampton
Totally agree. Even though I personally don't need this guide, I've still thanked you because I appreciate the time and effort you've put in, and that's just a brilliant 1st post!

Welcome to xda mate
.
"I live by my own rules, nobody else's, not even my own."
.
My xda links

New User Guide | XDA Forum Rules | 10 Posts - Why and How? | Admins & Mods | My xda Bookmarks

.

.
The Following User Says Thank You to Archer For This Useful Post: [ Click to Expand ]
 
gamestorm
Old
#4  
Junior Member
Thanks Meter 3
Posts: 15
Join Date: Feb 2011

 
DONATE TO ME
+1 ....awesome Ist post, very useful for many.
 
orb3000
Old
#5  
orb3000's Avatar
XDA Portal Team / Senior Moderator
Thanks Meter 3029
Posts: 22,275
Join Date: Feb 2007
Location: T r a v e l i n g Likes: HTC & XDA Dislikes: apples...

 
DONATE TO ME
Great guide!
orb


HTC One M8 - HTC Butterfly S - HTC Universal

XDA is about developing and is for developers. Any user that recognizes that will gain the most benefit from this site


 
This is and always will be a site for developers, pure and simple. Without them we are nothing, without them there would be no reason for XDA Developers to exist; we should never ever forget that. Without them this place would not be called XDA-Developers but something else, e.g Mobile Phone User Support Services For Ungrateful Nerds.

Previous devices: HTC: Treo 650 - Excalibur - Diamond - Diamond 2 - Maple - HD2 - Rhodium - Desire Z - Desire HD - Vivid - Sensation - One V - One X - Titan II - One X+ - DNA - Butterfly
 
Jackliveshere
Old
#6  
Jackliveshere's Avatar
Member
Thanks Meter 17
Posts: 37
Join Date: Dec 2009
Location: Perugia - London.- Thessaloniki - Brussels - Nikosia
Dear friend Gn,
thank you for your guide it is very detailed and precise but despite that fact
my ignorance(or stupidity) did't let me make the work. My mem is still 448mb, i thought after making the first two steps i'll had 576 of mem but it didn't work. At the first place i had 1.44 rom then i have change it in 1.66 with radio 2.15 but all that after installing Hspl.oops!!.
So now i have no idea how to proceed and put the android nand on. Can you help me please?
Thank you in advance
 
geniouslin
Old
#7  
Junior Member
Thanks Meter 0
Posts: 5
Join Date: Apr 2010
I think by memory he meant ROM not RAM
 
gunjahman
Old
(Last edited by gunjahman; 10th May 2011 at 06:08 PM.) Reason: updating info
#8  
gunjahman's Avatar
Member - OP
Thanks Meter 155
Posts: 82
Join Date: Jan 2011
Since the first guide was useful to some people, I'm posting another one: How to Install NAND Android on HTC HD2 without ClockWorkMod Recovery. The first three steps are the same. All this stuff is not mine. I've just gathered other peoples postings. So all thanks shloud go to them. I'm just a bug.


How to Install NAND Android on HTC HD2 WITHOUT ClockWorkMod Recovery

(updated 12 March 2011)



Prerequisites
  • HSPL3 ~ SPL-2.08.HSPL or HSPL4
  • Radio that support 576 RAM (ex. radio ROM 2.15)
  • DFT MAGLDR Bootloader

Make sure that you have all the prerequisites installed.

STEPS:
A1: Install HSPL3
or
A2: Install HSPL4
B: Install radio ROM 2.15
C: Install MAGLDR on HTC HD2
D: Install NAND Android on HTC HD2



A1: Install HSPL3

Prerequisites

* Windows Mobile Device Center installed on Windows Vista / Windows 7 or
* ActiveSync installed on Windows XP
* You must have any SPL version from this list on your device:

o SPL 1.42.0000
o SPL 1.62.0000
o SPL 1.66.0000
o SPL 2.07.0000
o SPL 2.08.0000
o SPL 2.10.0000

(To check your SPL version, hold the Volume Down button and do a reset)
You should have this SPL version unless you are using the latest 3.14 ROM with SPL 3.03.0000. No worry, just downgrade your Windows Mobile ROM from v3.14 to v1.66 will do. Download HTC HD2 v1.66 ROM. Then downgrade your phone from SPL 3.03.0000 to SPL 1.42.000.

Step by Step Guide

1. Power off your phone.
2. Press volume down button (don’t let go) and power on your phone.
3. It will load into bootloader.
4. You should get ‘Red, Green, Blue and White’ screen with SPL-1.42.
5. Take off the battery.
6. Power on your phone.
7. Connect USB cable from PC to phone after Windows Mobile loaded.
8. Select ‘ActiveSync’ and click ‘Done’.
9. Open HSPL3_PKG.zip with 7-Zip.
10. Copy HSPL3_PKG.exe to desktop.
11. Execute HSPL3_PKG.
12. Follow onscreen instructions to install.
13. Click ‘Yes’ if User Access Control prompt up.
14. Bootloader will be loaded with USB status during starting of installation.
15. Select ’2.08.HSPL’ to install.
16. After installation, you should see ‘We hacked it!’ on your phone.
17. Click on ‘Yes’ and your phone should be rebooted and load into Windows Mobile.
18. Disconnect USB cable from phone.
19. To verify, power off your phone.
20. Press volume down button (don’t let go) and power on your phone.
21. It will load into bootloader.
22. You should get ‘Red, Green, Blue and White’ screen with SPL-2.08.HSPL.
23. That’s all.

OR

A2: Install HSPL4

Prerequisites

* Windows Mobile Device Center installed on Windows Vista / Windows 7 or
* ActiveSync installed on Windows XP
* You must have any SPL version from this list on your device:
o SPL 1.42.0000
o SPL 1.62.0000
o SPL 1.66.0000
o SPL 2.07.0000
o SPL 2.08.0000
o SPL 2.10.0000
o SPL 3.03.0000 (for those using latest official HTC HD2 ROM v3.14)

(To check your SPL version, hold the Volume Down button and do a reset)

HSPL4 includes SPL-2.08.0000, SPL-2.08.HSPL, SPL-3.03.0000 and SPL-3.03.HSPL. The 3.03 SPL supports LEO1024.
You still need to use SPL-2.08.HSPL to use NAND Android and Windows Phone 7 and MAGLDR.
Make sure that you select the correct HSPL for your ROM installation.


Step by Step Guide

1. Power off your phone.
2. Press volume down button (don’t let go) and power on your phone.
3. It will load into bootloader.
4. You should get ‘Red, Green, Blue and White’ screen with SPL-1.42.
5. Take off the battery.
6. Power on your phone.
7. Connect USB cable from PC to phone after Windows Mobile loaded.
8. Select ‘ActiveSync’ and click ‘Done’.
9. Open HSPL4.zip with 7-Zip.
10. Copy HSPL4.exe to desktop.
11. Execute HSP4.
12. Follow onscreen instructions to install.
13. Click ‘Yes’ if User Access Control prompt up.
14. Bootloader will be loaded with USB status during starting of installation.
15. Select 2.08HSPL or 3.03HSPL. (This is to prevent people with 1024LEO's installing an incompatable version and bricking their device).
16. Click next
17. When its finished the phone should be rebooted and load into Windows Mobile.
18. Click ok to terminate program
19. Disconnect USB cable from phone.
20. To verify, power off your phone.
21. Press volume down button (don’t let go) and power on your phone.
22. It will load into bootloader.
23. You should get ‘Red, Green, Blue and White’ screen with SPL 2.08 or 3.03.
24. That’s all.


B: Install Custom Radio ROM

Prerequisites

* HSPL3 ~ SPL-2.08.HSPL

In order to flash custom radio ROM, you need to have HSPL3 installed on your HTC HD2. By the way, I used Radio Leo 2.15.50.14 on my guide. You can use it or any other HTC HD2 Radio ROM version.

HTC HD2 has 576 MB physical RAM but was reduced by software to 512 MB only. And custom Windows Mobile ROM + radio 2.07 or above can unlock it to be 576 MB again. Certain custom Windows Mobile ROM need higher radio version than your phone. And NAND Android requires it too. So you need to install custom radio ROM (if you don’t have the correct radio version).

Step by Step Guide

1. Power off your phone.
2. Press volume down button (don’t let go) and power on your phone.
3. It will load into bootloader.
4. You should get ‘Red, Green, Blue and White’ screen with SPL-2.08.HSPL.
5. Take off the battery.
6. Power on your phone.
7. I have R 2.06.51.07 at bottom of the screen with green HTC Logo.
8. Connect USB cable from PC to phone after Windows Mobile loaded.
9. Select ‘ActiveSync’ and click ‘Done’.
10. Open Radio Leo 2.15.50.14.rar with 7-Zip.
11. Copy CustomRUU.exe and RUU_signed.nbh to desktop.
12. Execute CustomRUU.
13. Click ‘Yes’ if User Access Control prompt up.
14. Follow onscreen instructions to install.
15. Bootloader will be loaded with USB status during starting of installation. (~10 minutes)
16. Phone will be rebooted after installation finished.
17. You should have R 2.15.50.14 at bottom of the screen with green HTC Logo.
18. Disconnect USB cable from phone.
19. That’s all.

C: Install MAGLDR

In order to install NAND Android on HTC HD2, you must install DFT MAGLDR Bootloader first. And the good news ~ both LEO512 and LEO1024 are supported. This means US T-Mobile HD2, Europe, Asia and the rest of the world’s HTC HD2 are supported.

Note – by installing MAGLDR, you cannot boot into Windows Mobile anymore. So everything on your phone is gone…

Prerequisites

* HSPL3 ~ SPL-2.08.HSPL
* Radio that support 576 RAM

No worry, Android on NAND is working. That’s the reason we install DFT MAGLDR Bootloader on our HTC HD2, right? And we will be able to load a Windows Phone version when a new ROM comes out. Okay, let’s get started. If you don’t have HSPL3, please install it and also install radio ROM 2.15.

Step by Step Guide


1. Power off your phone.
2. Press volume down button (don’t let go) and power on your phone.
3. It will load into bootloader.
4. You should get ‘Red, Green, Blue and White’ screen with SPL-2.08.HSPL.
5. Take off the battery.
6. Power on your phone.
7. You should have R 2.15.50.14 at bottom of the screen with green HTC Logo.
8. Connect USB cable from PC to phone after Windows Mobile loaded.
9. Select ‘ActiveSync’ and click ‘Done’.
10. Open DFT_LEO_MAGLDR113.rar with 7-Zip.
11. Copy MAGLDR113 folder to desktop.
12. Enter MAGLDR113 folder.
13. Execute ROMUpdateUtility.
14. Click ‘Yes’ if User Access Control prompt up.
15. Follow onscreen instructions to install.
16. Bootloader will be loaded with USB status during starting of installation.
17. Phone will be rebooted after installation finished.
18. DFT MAGLDR Bootloader will be loaded then.
19. Disconnect USB cable from phone.
20. That’s all.

D: Install NAND Android

Prerequisites

* HSPL3 ~ SPL-2.08.HSPL
* Radio that support 576 RAM
* DFT MAGLDR Bootloader

Make sure that you have all the prerequisites installed.

Step by Step Guide

1. Power on your phone.
2. DFT MAGLDR Bootloader will be loaded.
3. Use volume down button to go down to 5. USB Flasher.
4. Then press call button to load Android Flasher mode.
5. Connect USB cable from PC to phone.
6. Open your favorite ROM (ex. DFT_LEO_NAND_Android.rar) with 7-Zip.
7. Copy DFT_Android folder to desktop.
8. Enter DFT_Android folder.
9. Execute DAF.
10. Follow onscreen instructions to install.
11. Click ‘Yes’ if User Access Control prompt up.
12. Phone will be rebooted after installation finished.


Maybe the next steps are not obligatory, depending on the ROM you are going to install. In my case, I didn't have to follow the rest of the process, because the ROM I've used, has done the job itself and my phone was ready to work. (I've used CleanDroid and I had PERFCET results. Very light, clean and stable ROM. I've installed 30-40 apps and still is stable, alive and kicking.)



13. DFT MAGLDR Bootloader will be loaded then.
14. Use volume down button to go down to 3. Boot AD NAND.
15. Then press call button to load NAND Android.
16. Disconnect USB cable from phone.
17. Follow onscreen instructions to setup Android settings.
18. That’s all.


Alsomaybe the next steps are not obligatory.

To make auto boot to NAND Android.

1. Restart your phone.
2. Load to DFT MAGLDR Bootloader
3. Use volume up button to go up to 10. Services.
4. Then press call button to load Services Menu.
5. Then press call button again to enter AutoBoot settings.
6. Then press call button again to enter Boot source settings.
7. Select 3. Android from NAND with call button.
8. Use volume up button to go up to 10. Services again.
9. Then press call button to load Services Menu.
10. Then press call button again to enter AutoBoot settings.
11. Select 2. AlwaysMenu with call button.
12. Press power on/off button to select NO at Show boot menu always at boot?
13. Use volume up button to go up to 11. Reset.
14. Phone will be rebooted and enter NAND Android automatically.
15. That’s all.

Good Luck
The Following 17 Users Say Thank You to gunjahman For This Useful Post: [ Click to Expand ]
 
aditya_r12
Old
#9  
Member
Thanks Meter 3
Posts: 57
Join Date: May 2009
Location: Los Angeles
Default install fresh Android ROM over dual boot hd2

I've set up dual boot to android and WP7 on my HTC HD2. I now wish to go back to only ANdroid on my phone. What are the steps for that. As my SD Card is partitioned will the new android rom be installed on just the NAND portion?
I need to know to what type of filesystem should I format my SD card so that i can install a fresh ROM.DO i need to go back to stock WM6.5 to install this.
 
gunjahman
Old
#10  
gunjahman's Avatar
Member - OP
Thanks Meter 155
Posts: 82
Join Date: Jan 2011
Hi aditya_r12

Here's my newbie answer.

I think you can forget the sd card temporarily (remove it if you want),
flash a windows sytem (or just leave the existing win7) and then follow one of the above methods (the easier is the non clockwork mod), and you will be back to a nand android-only phone. After you can mount back your card with one or two partitions, or you can reparticion it or whatever.
I hope an experienced member, will also answer to you, since I'm an absolute ignorant newbie, which was lucky enough to manage to flash a perfeclty functioning android hd2, from scratch (thanks to the instructions of these nice people in this forum).

Good luck

The Following User Says Thank You to gunjahman For This Useful Post: [ Click to Expand ]
Tags
android, guide, hd2, nand
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes