(Q)How to unbrick x10 mini

---

Hello,
It happens.
I brick my phone x10 mini and its now stuck in sony ericson white written name.
It happens cause i Unluckyli i press "customize" button in x10flasher.
Can i reflash throght x10 flasher?

Any aid?

Tnx in advance.

Sol.

---

Dude jst re-flash again with Bin4ry Flash.....and this problem will no longer exists.

Or eventually, use SEUS/Companion repair method. Remember, when u turn off the phone (home button + power on button pressed), insert usb cable and keep the back button pressed for a while (2-3 min) until green led turns on.

The main problem was because you cannot take off batery.
I waited 7 hours with the stucked screem, than turn on charge, it boots up in chargemon.
From there, bin4ry worked very nice.

Originally Posted by pedrocel85

The main problem was because you cannot take off batery.
I waited 7 hours with the stucked screem, than turn on charge, it boots up in chargemon.
From there, bin4ry worked very nice.

man that wasn't necessary......in the back of the cell there is a little rubber cover you only take it out and you will see a socket a 3 wires, you just have to unplug it with a clip or somthing else and then pu**** to place it, and "ta da" you have taken out and placed the battery.......thats how i've recovered mi x10 mini bricked and it only take it to repair 10 min as max.....

Holding power and home button for 3 seconds also restarts the phone when it stuck on son ericsson screen

i did that and now it cannot turn on after numerous attempts

i cant find that rubber cover
there is a orange thing whcih can be pushed,but i cant find any wires....plssssssss can u help me out with more details and if possible with some picturessssssssss

you could try the sony Ericsson update service

Go to PC companion in your computer.Connect your phone while pressing back and home.In PC, choose Support zone and then click on update.KEEP PUSHING THE BUTTONS AND DO WHAT IT SAYS!Tada.Your phone is ready and loaded!
Sent from my X10mini ng XDA App