Honeycomb for EMMC ***IMAGES!***

---

What we have here is a set of images to flash to your Nook and run Honeycomb on your internal storage. (Currently based on Deeper_Blue's v02) The method for installing is the same as for Nookie Froyo on EMMC (http://forum.xda-developers.com/showthread.php?t=926749)

To Install HC to your Nook Color flash CWR to your sd card (http://forum.xda-developers.com/showthread.php?t=922870)

Copy the two image files to the sd card.

Boot to CWR and ADB Shell into your NC.

Run the following commands to flash Honeycomb:

mount data
mount sdcard
rm /data/* -r
dd if=/sdcard/hcboot.img of=/dev/block/mmcblk0p1
dd if=/sdcard/hcsystem.img of=/dev/block/mmcblk0p5
reboot

ATTENTION! Do not use CWR to format your SD card, also remove your SD card after installation so it will boot to HC and not CWR!

I would like to thank MattJ951 for his work with Samuelhauf on getting the uRamdisk working to boot, and Deeper_blue for porting honeycomb to the Nook Color. (If i have forgotten anyone PM me and I will give credit!)

hcboot.zip (24.41 MB) http://www.multiupload.com/153I3TA6JN
hcsystem.zip (204.69 MB) http://www.multiupload.com/1MDP2LYJMG

Original Project by MattJ951 (http://forum.xda-developers.com/showthread.php?t=943724)

Woo! Nice!

Once again, you forget to mention not to use sdcard format on the NC after having installed this.. your going to have black screen complaints..

Sent from my HTC Desire using XDA App

Nothing should get formatted as these are dd images.... run the commands above and everyone should be fine..

Sent from my LogicPD Zoom2 using Tapatalk

AMAZING! worked Perfectly!!!!!! WOW! (I had to take samuelhalff's advice and removed the sdcard just in case on boot) everything is working perfectly! thank you very much for your work!

anyone notice any speed increase than say a class 6 sd card?

anyone notice any speed increase than say a class 6 sd card?

same question here!

HC v3, eMMC 1100 kernel, launcherpro.
Smooth.

Tried converting data and cache to ext4. No go. Seems deeperblue hasn't added ext4 support to his kernel yet..

By the way, no problem with v3.
You must have missed something while copying system. Maybe your partition was too small..

Sam

Sent from my HTC Desire using XDA App

How would I add gapps and market after I install HC eMMC?

what is EMMC