REQ spica untouched firmware

---

Can someone please upload the latest firmware avaialable for spica that has romanian language and it is unbranded. i installed a french firmware but it doesn't have ro language.

Originally Posted by boditza

Can someone please upload the latest firmware avaialable for spica that has romanian language and it is unbranded. i installed a french firmware but it doesn't have ro language.

original firmware but eclair 2.1
http://www.multiupload.com/VS9QWXDV4W

Originally Posted by yamen.meddeb

original firmware but eclair 2.1
http://www.multiupload.com/VS9QWXDV4W

thank you for that but it does not ave romanian. installed I570EXXJH7 and it has romanian, but its branded with 3-4 apps . its ok i guess, at least i got the desired language

Originally Posted by boditza

thank you for that but it does not ave romanian. installed I570EXXJH7 and it has romanian, but its branded with 3-4 apps . its ok i guess, at least i got the desired language

I have tried many 2.2's on the spica and i want to flash it to this version of the original firmware - I570EXXJH1

I have downloaded this from samfirmwares and after opening it i t contained 2 files, a eSER.tar file and a SS_DL.dll.
Also it said that the New .ops file is required is required,but the link does not work.
I also have odin 4.03 with some ops file in it,don't know wether it's old or new.

1.can anyone post the link to the New .ops file.
2.So what all should i select in odin ?
3.which one do you recon is enough if english is used as the primary language as i have already have Jh1 version

Originally Posted by boditza

installed I570EXXJH7 and it has romanian, but its branded with 3-4 apps

Just flash without CSC (cache.rfs) -> no branding at all. AFAIK the pre-configured APNs are in there also, so you'll have to configure those manually, even if you didn't before.

Originally Posted by boxy44

I have tried many 2.2's on the spica and i want to flash it to this version of the original firmware - I570EXXJH1

I have downloaded this from samfirmwares and after opening it i t contained 2 files, a eSER.tar file and a SS_DL.dll.
Also it said that the New .ops file is required is required,but the link does not work.
I also have odin 4.03 with some ops file in it,don't know wether it's old or new.

1.can anyone post the link to the New .ops file.
2.So what all should i select in odin ?
3.which one do you recon is enough if english is used as the primary language as i have already have Jh1 version

You just tick one package option.

New .ops file you can find at the bottom of samfirmwares page.

Gud Luck!

Originally Posted by fallenguru

Just flash without CSC (cache.rfs) -> no branding at all. AFAIK the pre-configured APNs are in there also, so you'll have to configure those manually, even if you didn't before.

I already have jh7 installed. will it still work if i reflash it without csc? apns are for acces point names? if they are i don't need them since they are from south africa operators and i use mainly wifi. i think that with the apps the operator installed in the firmware the memory is drasticly reduced so i can install only 4-5 apps then i get the low memory message.

p.s. does anyone know why the low battery sound isn't present?? i just get the on screen message in wich it tells me i have under 15% left but no message tone whatsoever. just shuts down and never tells me