[GoldCard Maker] SimpleGoldCard - GoldCardTool Tweak to work with HTC Inspire

---

I rewrote some of GoldCardTool's work to make it will work with HTC Inspire. I will continue to make it better and easier. I've tested it a few times and it works fine. Let me know if you run into any problems.

Steps
-------
1. Place future SD Gold Card into the Computer. Select MMC (SD Card) Drive and Click "Format"
2. Place the SD Card into the Phone. Connect Phone to Computer via USB.
3. Select MMC (MMC2 for HTC Inspire). Click GetCID. Copy the CID into your clipboard.
(If you can't get CID, make sure you have HTC Sync installed,USB Debugging is checked, and USB mode is on Charge Only
4. Go to psas.revskills.de/?q=goldcard,and follow the steps on that page. Your IMG will get emailed to you.
5. Download the IMG file you recieved in your email. Click "Load IMG" and select IMG file. And click "Patch".




I'm not greedy, any donation is appreciated. =)

Donate!



Back to Version 1. I'll need figure out what's wrong with version 2.

This is going to help a lot of people. Great initiative!

Have any screenies of the application?

Sent from my Inspire 4G or Desire HD or whatever this thing is called via XDA app.

can you give instructions? Im coming from a captivate.

thanks

Very nice. If you were to update the OP with instructions on how to use it. That would be splendid.

You sir are my hero.I have not been able to make a valid gold card with any of the previous methods and this time it worked.Flawlessly too I might add.You got a donation coming your way when I get paid next week.

Thanks for this. I get the following error though when I try to patch the MMC (step 5). The card now reads when plugged in as "GOLDCARD". Am I done?

See the end of this message for details on invoking 
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
   at SimpleGoldCard.DriveNumber.matchDriveNumber()
   at SimpleGoldCard.DriveNumber.getdriveNumber(String driveLetter)
   at SimpleGoldCard.Form1.PatchButton_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4952 (win7RTMGDR.050727-4900)
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
SimpleGoldCard
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Users/Geoff_Laptop/Downloads/SimpleGoldCard.exe
----------------------------------------
System.Windows.Forms
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------

Originally Posted by bubby323

Very nice. If you were to update the OP with instructions on how to use it. That would be splendid.

Thanks! Steps added. How's your One Click coming along? You can PM me.

Originally Posted by gewbert3

Thanks for this. I get the following error though when I try to patch the MMC (step 5). The card now reads when plugged in as "GOLDCARD". Am I done?

I've updated the app so it will avoid this error.

You still need to Patch the card. Remove the card from Phone and insert into computer. Then load the IMG file, in step 5. After, in Step 6, select the MMC Drive and click "Patch". If done correctly, you should see a pop up stating its successful.

Let me know if your still having problems.

Nope, no luck. Still get this error when doing step 5:

See the end of this message for details on invoking 
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
   at SimpleGoldCard.DriveNumber.matchDriveNumber()
   at SimpleGoldCard.DriveNumber.getdriveNumber(String driveLetter)
   at SimpleGoldCard.Form1.PatchButton_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4952 (win7RTMGDR.050727-4900)
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
SimpleGoldCard
    Assembly Version: 1.0.1.1
    Win32 Version: 1.0.1.1
    CodeBase: file:///C:/Users/Geoff_Laptop/Downloads/SimpleGoldCard.exe
----------------------------------------
System.Windows.Forms
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Management
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Management/2.0.0.0__b03f5f7f11d50a3a/System.Management.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Originally Posted by gewbert3

Nope, no luck. Still get this error when doing step 5:

You shouldn't be getting this error in Step 5. Step 5 is loading the IMG file. Has nothing to do with MMC Drive.