【STOCK】i896 Rogers Warranty ROMS (10/30/11)【ODIN3】【ODIN 1CLICK】

Search This thread

TRusselo

Inactive Recognized Developer
Jan 20, 2011
4,736
2,931
Edmonton
【STOCK】i896 Rogers Warranty ROMS (10/30/11)【ODIN3】【ODIN 1CLICK】

NEW!!! Odin One-Click Packages, MADE BY ME! Added below!


The NON one-click packages are the result of the hard work of user nzahorchak (spank his Thank-you button)
These are tried tested and true. and with odin 1.5 or newer very stable to flash. ei odin doesnt hang.
This Post contains the files for 2.1- i896UXJI2 AND 2.2 - i896UXJL1 AND 2.3.3 - i896UXKH2 version of this fixed stock ROM.

SGH -i896 wiki - VERY USEFUL INFO if you haven't seen already.

ALL original "stock" flashes for rogers are missing:
dbdata.rls - if you used pit, you screwed yourself.
i896 -boot-screen replacement. - if you flashed ATT stock, you got stuck with "world phone" boot-screen.

we have a COMPLETE Odin flash-able 2.1, 2.2 and 2.3.3 Rogers stock ROMS that will:
  • have NO dbdata / mounting error on reboot when using pit/re-partition in Odin
  • REMOVES ATT boot logo !!!!! yeah the first one! AND NOT WITH THE RENAME PICTURE TRICK
  • FULLY WARRANTY PASSABLE (root locked, but will not undo SIM lock but you will have backup files for that.)
1 minor issue - some users claimed to not have APN settings after flashing. Apn settings let you connect to the internet and send MMS messages on your phone. if you need them.... APN Settings HERE


the 2.1 is named Toronto because that's where nzahorchak is from, and not to cause confusion because the zip file is 145mb and had the same original name and size of THE STOCK ROM that screwed so many of us! all the files in the .tar are different.
========================================
INSTRUCTIONS - for those who might need them.
  1. Download and install " APN Backup and Restore " from market and backup APN settings.
  2. Unzip files to one location
  3. Boot phone into download mode. (Powered OFF, hold VOL UP & DN, plug in USB)
  4. Open Odin3 1.xx flashing utility (NOT ODIN3 ONE CLICK RESTORE TO STOCK)
  5. Use the ROM.tar file from the stock ROM .zip in PDA box of ODIN
  6. **Use the 512 .pit file that came with odin3 and check re-partition and check auto-reboot. PIT FILE IS A MUST IF YOU HAVE FLASHED ANY CM7 ROM!!!!! If NOT , pit should NOT be needed.
  7. Click start.
  8. Download " APN Backup and Restore " and Restore APN settings.
or... APN Settings HERE


3 NOTES !!
  • IF the phone gets stuck at the Rogers boot logo and does not fully boot, re-boot into stock recovery, select "erase user data" + "erase cache data", re-boot. BE PATIENT before you assume this has happened to you!!15 minutes at least. First kernel or ROM boot ALWAYS takes a while! I personally have never had to do this!
  • Some people claim you must plug in the USB after starting Odin, i had no issues both ways. If the box turns YELLOW, and your files are selected, you are good to go. USB Cable must be plugged into Computer though (yes i was asked)
  • I generally flash with my sim and SD card removed, it is not necessary but the SD card did cause me to hang in one situation before, so i just always remove it to be safe.
here are the 2.1 - i896UXJI2 STOCK ROM links...
http://dl.dropbox.com/u/19201431/Files/I896UXJI2 TORONTO.zip
OR
http://dl.dropbox.com/u/20958367/I896UXJI2 TORONTO.zip
OR
http://www.megaupload.com/?d=DUY2P7JI
OR
http://www.megaupload.com/?d=84SKQV0F


here are the 2.2 - i896UXJL1 STOCK ROM links...
http://xdaforums.com/showthread.php?t=1007276

pit file is included in Odin packages attached below
Any of the odin3s below will work. 1.81 and up now has bootloader option though we dont use that option yet, but it is more stable. Newer is Better!

2.3.3 STOCK! from rogers no changes. DO NOT USE .PIT FILE WITH THIS STOCK! if you need to repartition use 2.2 with pit file then upgrade to 2.3.3 with NO PIT FILE!!!
ALSO, IT CONTAINS BOOTLOADERS!! necessary to upgrade to gingerbread!

this is THE FILE keis used.


The rom below will NOT fix an ATT bootscreen issue, rogers did not change their params.lfs partition so it is not in the rogers keis update. To FIX ATT Bootscreen flash THIS FILE in odin PDA box before or after 2.3.3 stock.

LINK UPDATED .MD5 checksum PASS
http://hotfile.com/dl/130585492/8ca639c/SGH-I896_RWC_I896UXKH2.rar.html
PASSWORD: sampro.pl

ODIN ONE CLICKS NOW AVAILABLE!!!
NOTE: These packages do not set pit file, or re-partition (same thing), as setting pit was casuing LOTS of failed flashes, and if it fails as it sets pit, you loose the download picture, and it APPEARS bricked but odin will still see the phone (and turn yellow) if you put it in download mode, even with a blank phone screen.


Instructions:
#1 preform factory reset! MUST DO! - if you are unable to do this FIRST, do it immediately after flashing! you will get bootloops without wiping data!
-boot into recovery and select factory reset or clear user data
-or select factory reset from within android operating system settings
#2 Run ODIN one click (version of choice) - odin must be opened before plugging in phone
#3 Boot into download Mode
- with phone OFF, hold both volume buttons, plug USB into phone from pc
#4 Click START
#5 Wait! it should take about 5 minutes, then it will reboot itself!

If the process hangs, and IT DOES (usually at the start) close odin, take battery out of phone, put back in and restart odin, reboot phone into dl mode, try again. HOPE TO GOD it doesnt hang on boot.bin or sbl.bin on the one package containing Bootloaders. Bootloaders are required to upgrade a phone to gingerbread, but they work with older versions and there is no way to tell, so there is no reason to downgrade ever, and it is unnecessary to ever flash them again, maybe until ICS (lol)


with the old packages some users claimed to not have APN settings after flashing. Apn settings let you connect to the internet and send MMS messages on your phone. if you need them....
APN Settings HERE
Odin3 One-Click ROGERS packages!
  • 2.1 update 1 Eclair
http://www.mediafire.com/?b8bq0i6lwdr3dzw

http://db.tt/ts8r8Opt
  • 2.2 Froyo
http://www.mediafire.com/?pl2arpndghuashe

http://db.tt/9fEaDDH2
  • 2.3.3 Gingerbread WITH bootloaders
http://www.mediafire.com/?5rcofbzusoor6mv

http://db.tt/mXSwWwUk
  • 2.3.3 Gingerbread NO Bootloaders
http://www.mediafire.com/?a2czpn1xcxtq189

http://db.tt/r9dMJ3Br


The 2.1 and 2.2 updates dont set your APN settings, set manually with these settings:
APN Settings HERE
 

Attachments

  • Odin3_1-81.zip
    198.4 KB · Views: 1,056
  • Odin3v1.85.zip
    198.4 KB · Views: 2,651
  • CSC.tar
    3.9 MB · Views: 1,546
Last edited:

backdownup

Member
Jan 25, 2011
35
3
You sir, are the man. I will try this asap. I really hope it works. For some reason that AT&T logo makes me feel cheap and dirty :).

Thank you for your hard work Nzahorchak.

EDIT: I've never got into dropbox... do I have to do it from my phone via the dropbox app? If so can we have a hosted link?

Oh... It's probably not up yet... I forgot to synch my XDA time I think... says 2:30am... It's 5:30pm where I am... the link is probably not up yet.
 
Last edited:

DAGr8

Inactive Recognized Developer
Feb 27, 2010
3,713
6,309
Montreal
great job , any ways you can put this in a cwm zip while your at it ?

j/k or am I ?
 

TRusselo

Inactive Recognized Developer
Jan 20, 2011
4,736
2,931
Edmonton
I JUST USED IT. BEFORE POSTING! IT WORKS! full NO ATT ROGERS STOCK.
doing TiBu restore now on my phoenix 4.5 with darfire blue!

EDIT: I've never got into dropbox... do I have to do it from my phone via the dropbox app? If so can we have a hosted link?

Oh... It's probably not up yet... I forgot to synch my XDA time I think... says 2:30am... It's 5:30pm where I am... the link is probably not up yet.

just click the link now, it may have not been done uploading.
you dont need to "get into" dropbox. just click the link and it should download!
great job , any ways you can put this in a cwm zip while your at it ?

j/k or am I ?
i wouldnt know how to do that, and make sure EVERYTHING turns out right. well... not today at least.
but someone else might be able to before i would learn how.
IMPORTANT PARTS TO THIS ODIN WORKING ARE: dbdata.rfs and param.lfs, maybe more...
 
Last edited:
  • Like
Reactions: zizo0727

nzahorchak

Senior Member
Oct 25, 2010
283
95
Toronto
You sir, are the man. I will try this asap. I really hope it works. For some reason that AT&T logo makes me feel cheap and dirty :).

Thank you for your hard work Nzahorchak.

You're welcome. That's exactly why I put the hours in to create this... well, that and warranty purposes, lol. I guess I should have shared this sooner. I'm no developer and somewhat new to Android, so it took some time.
 

backdownup

Member
Jan 25, 2011
35
3
You're welcome. That's exactly why I put the hours in to create this... well, that and warranty purposes, lol. I guess I should have shared this sooner. I'm no developer and somewhat new to Android, so it took some time.

Glad you are on here. Thank you for addressing an otherwise overlooked problem that really bothered a lot of Canadian captivate users. I've done many google/xda searches for removal tools but they all seemed super sketchy.

Your time and hard work is appreciated, I'm sure not only by me, but by every canadian captivate user that's had to flash back to "stock".
 
  • Like
Reactions: parshantx

TheShamsMan

Senior Member
Oct 11, 2010
724
53
Taitung
Hey! Thanks for posting this! I've been trying to figure it out for the longest time and just gave up.

I was wondering if the APN settings can be manually inputted after flashing back to stock without using APN Backup and Restore? Or are there issues/crashes when attempting to input with APN B&R?

Thanks again!
 

nzahorchak

Senior Member
Oct 25, 2010
283
95
Toronto
Hey! Thanks for posting this! I've been trying to figure it out for the longest time and just gave up.

I was wondering if the APN settings can be manually inputted after flashing back to stock without using APN Backup and Restore? Or are there issues/crashes when attempting to input with APN B&R?

Thanks again!

You can input the APN settings manually without any issues. I haven't tried APN B&R. These are the ones I use (for Rogers) and I've included Fido's for Fido users' convenience.

Rogers Access Point Settings
APN: rogers-core-appl1.apn
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302 (retrieved from SIM)
MNC: 720 (retrieved from SIM).
Authentication type: <not set>
APN type: <not set>

Fido Access Point Settings
APN: fido-core-appl1.apn
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: http://mms.fido.ca
MMS Proxy: 205.151.11.13
MMS Port: 80
MCC: 302 (retrieved from SIM)
MNC: 370 (retrieved from SIM).
Authentication type: <not set>
APN type: <not set>
 
Last edited:

TRusselo

Inactive Recognized Developer
Jan 20, 2011
4,736
2,931
Edmonton
I used APN backup and restore. and had no issues, and i see no reason why manually entering would cause issue either. Titanium Backup can also backup and restore your APN settings.
 

caanda45

Senior Member
Sep 10, 2010
1,861
340
Winnipeg, Manitoba
FULLY WARRANTY PASSABLE (root locked, but will not undo SIM lock but you will have backup files for that.)

I have a I896 now on FF 2.4 used a ODIN that gave me the AT&T boot screen etc. I am unlocked rooted etc can you elaborate on your point above in the quote? I have used tibu on every back up the apps only. So if I use this ODIN will I loose my sim unlock? Not totally sure what you mean. :confused: Or where and what files to make sure it stays unlocked?

Thanks and great work, we do need this for the "just in case"!
 

TRusselo

Inactive Recognized Developer
Jan 20, 2011
4,736
2,931
Edmonton
read the quote again.... "but will NOT undo sim unlock" most unlock methods (for canadian captivates) swap out a file and back up your original if you want to Lock it again. I used "Galaxy S unlock" from the market. root method.

**Canadian captivates dont have the unlock code stored in them, thats why root is required for us so it can do the file swap method. By law in Canada your carrier must give you the unlock code if you request it but they can charge you, this is to prevent them from FORCING you to pay roaming charges when travelling abroad.

so, it stays unlocked for the sim but root gets locked again.
 
Last edited:

caanda45

Senior Member
Sep 10, 2010
1,861
340
Winnipeg, Manitoba
Okay I think I understand. I paid and got a sim unlock code, so I think I will be okay. I will check when I get home with my American sim card since I have rooted and romed since the unlock.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 66
    【STOCK】i896 Rogers Warranty ROMS (10/30/11)【ODIN3】【ODIN 1CLICK】

    NEW!!! Odin One-Click Packages, MADE BY ME! Added below!


    The NON one-click packages are the result of the hard work of user nzahorchak (spank his Thank-you button)
    These are tried tested and true. and with odin 1.5 or newer very stable to flash. ei odin doesnt hang.
    This Post contains the files for 2.1- i896UXJI2 AND 2.2 - i896UXJL1 AND 2.3.3 - i896UXKH2 version of this fixed stock ROM.

    SGH -i896 wiki - VERY USEFUL INFO if you haven't seen already.

    ALL original "stock" flashes for rogers are missing:
    dbdata.rls - if you used pit, you screwed yourself.
    i896 -boot-screen replacement. - if you flashed ATT stock, you got stuck with "world phone" boot-screen.

    we have a COMPLETE Odin flash-able 2.1, 2.2 and 2.3.3 Rogers stock ROMS that will:
    • have NO dbdata / mounting error on reboot when using pit/re-partition in Odin
    • REMOVES ATT boot logo !!!!! yeah the first one! AND NOT WITH THE RENAME PICTURE TRICK
    • FULLY WARRANTY PASSABLE (root locked, but will not undo SIM lock but you will have backup files for that.)
    1 minor issue - some users claimed to not have APN settings after flashing. Apn settings let you connect to the internet and send MMS messages on your phone. if you need them.... APN Settings HERE


    the 2.1 is named Toronto because that's where nzahorchak is from, and not to cause confusion because the zip file is 145mb and had the same original name and size of THE STOCK ROM that screwed so many of us! all the files in the .tar are different.
    ========================================
    INSTRUCTIONS - for those who might need them.
    1. Download and install " APN Backup and Restore " from market and backup APN settings.
    2. Unzip files to one location
    3. Boot phone into download mode. (Powered OFF, hold VOL UP & DN, plug in USB)
    4. Open Odin3 1.xx flashing utility (NOT ODIN3 ONE CLICK RESTORE TO STOCK)
    5. Use the ROM.tar file from the stock ROM .zip in PDA box of ODIN
    6. **Use the 512 .pit file that came with odin3 and check re-partition and check auto-reboot. PIT FILE IS A MUST IF YOU HAVE FLASHED ANY CM7 ROM!!!!! If NOT , pit should NOT be needed.
    7. Click start.
    8. Download " APN Backup and Restore " and Restore APN settings.
    or... APN Settings HERE


    3 NOTES !!
    • IF the phone gets stuck at the Rogers boot logo and does not fully boot, re-boot into stock recovery, select "erase user data" + "erase cache data", re-boot. BE PATIENT before you assume this has happened to you!!15 minutes at least. First kernel or ROM boot ALWAYS takes a while! I personally have never had to do this!
    • Some people claim you must plug in the USB after starting Odin, i had no issues both ways. If the box turns YELLOW, and your files are selected, you are good to go. USB Cable must be plugged into Computer though (yes i was asked)
    • I generally flash with my sim and SD card removed, it is not necessary but the SD card did cause me to hang in one situation before, so i just always remove it to be safe.
    here are the 2.1 - i896UXJI2 STOCK ROM links...
    http://dl.dropbox.com/u/19201431/Files/I896UXJI2 TORONTO.zip
    OR
    http://dl.dropbox.com/u/20958367/I896UXJI2 TORONTO.zip
    OR
    http://www.megaupload.com/?d=DUY2P7JI
    OR
    http://www.megaupload.com/?d=84SKQV0F


    here are the 2.2 - i896UXJL1 STOCK ROM links...
    http://xdaforums.com/showthread.php?t=1007276

    pit file is included in Odin packages attached below
    Any of the odin3s below will work. 1.81 and up now has bootloader option though we dont use that option yet, but it is more stable. Newer is Better!

    2.3.3 STOCK! from rogers no changes. DO NOT USE .PIT FILE WITH THIS STOCK! if you need to repartition use 2.2 with pit file then upgrade to 2.3.3 with NO PIT FILE!!!
    ALSO, IT CONTAINS BOOTLOADERS!! necessary to upgrade to gingerbread!

    this is THE FILE keis used.


    The rom below will NOT fix an ATT bootscreen issue, rogers did not change their params.lfs partition so it is not in the rogers keis update. To FIX ATT Bootscreen flash THIS FILE in odin PDA box before or after 2.3.3 stock.

    LINK UPDATED .MD5 checksum PASS
    http://hotfile.com/dl/130585492/8ca639c/SGH-I896_RWC_I896UXKH2.rar.html
    PASSWORD: sampro.pl

    ODIN ONE CLICKS NOW AVAILABLE!!!
    NOTE: These packages do not set pit file, or re-partition (same thing), as setting pit was casuing LOTS of failed flashes, and if it fails as it sets pit, you loose the download picture, and it APPEARS bricked but odin will still see the phone (and turn yellow) if you put it in download mode, even with a blank phone screen.


    Instructions:
    #1 preform factory reset! MUST DO! - if you are unable to do this FIRST, do it immediately after flashing! you will get bootloops without wiping data!
    -boot into recovery and select factory reset or clear user data
    -or select factory reset from within android operating system settings
    #2 Run ODIN one click (version of choice) - odin must be opened before plugging in phone
    #3 Boot into download Mode
    - with phone OFF, hold both volume buttons, plug USB into phone from pc
    #4 Click START
    #5 Wait! it should take about 5 minutes, then it will reboot itself!

    If the process hangs, and IT DOES (usually at the start) close odin, take battery out of phone, put back in and restart odin, reboot phone into dl mode, try again. HOPE TO GOD it doesnt hang on boot.bin or sbl.bin on the one package containing Bootloaders. Bootloaders are required to upgrade a phone to gingerbread, but they work with older versions and there is no way to tell, so there is no reason to downgrade ever, and it is unnecessary to ever flash them again, maybe until ICS (lol)


    with the old packages some users claimed to not have APN settings after flashing. Apn settings let you connect to the internet and send MMS messages on your phone. if you need them....
    APN Settings HERE
    Odin3 One-Click ROGERS packages!
    • 2.1 update 1 Eclair
    http://www.mediafire.com/?b8bq0i6lwdr3dzw

    http://db.tt/ts8r8Opt
    • 2.2 Froyo
    http://www.mediafire.com/?pl2arpndghuashe

    http://db.tt/9fEaDDH2
    • 2.3.3 Gingerbread WITH bootloaders
    http://www.mediafire.com/?5rcofbzusoor6mv

    http://db.tt/mXSwWwUk
    • 2.3.3 Gingerbread NO Bootloaders
    http://www.mediafire.com/?a2czpn1xcxtq189

    http://db.tt/r9dMJ3Br


    The 2.1 and 2.2 updates dont set your APN settings, set manually with these settings:
    APN Settings HERE
    32
    You sir, are the man. I will try this asap. I really hope it works. For some reason that AT&T logo makes me feel cheap and dirty :).

    Thank you for your hard work Nzahorchak.

    You're welcome. That's exactly why I put the hours in to create this... well, that and warranty purposes, lol. I guess I should have shared this sooner. I'm no developer and somewhat new to Android, so it took some time.
    13
    spank his button!!!!

    Just don't spank it too hard, we wouldn't want the site to crash. ;)
    3
    Hey! Thanks for posting this! I've been trying to figure it out for the longest time and just gave up.

    I was wondering if the APN settings can be manually inputted after flashing back to stock without using APN Backup and Restore? Or are there issues/crashes when attempting to input with APN B&R?

    Thanks again!

    You can input the APN settings manually without any issues. I haven't tried APN B&R. These are the ones I use (for Rogers) and I've included Fido's for Fido users' convenience.

    Rogers Access Point Settings
    APN: rogers-core-appl1.apn
    Proxy: <not set>
    Port: <not set>
    Username: <not set>
    Password: <not set>
    Server: <not set>
    MMSC: http://mms.gprs.rogers.com
    MMS Proxy: 10.128.1.69
    MMS Port: 80
    MCC: 302 (retrieved from SIM)
    MNC: 720 (retrieved from SIM).
    Authentication type: <not set>
    APN type: <not set>

    Fido Access Point Settings
    APN: fido-core-appl1.apn
    Proxy: <not set>
    Port: <not set>
    Username: <not set>
    Password: <not set>
    Server: <not set>
    MMSC: http://mms.fido.ca
    MMS Proxy: 205.151.11.13
    MMS Port: 80
    MCC: 302 (retrieved from SIM)
    MNC: 370 (retrieved from SIM).
    Authentication type: <not set>
    APN type: <not set>
    3
    you're welcome. That's exactly why i put the hours in to create this... Well, that and warranty purposes, lol. I guess i should have shared this sooner. I'm no developer and somewhat new to android, so it took some time.
    spank his button!!!!