Originally Posted by 07blackwater

Will test 5 install over test 4 or do we need to un supercharge first?

just to be safe, I always unsuprercharge completely, delete all !xxxxxxxx.sh scripts, make sure no supercharger stuff is in init.d, reboot the phone Supercharge then SuperClean and reboot.

probably not entirely necessary, but I just like to make sure everything is cleaned up and all of zepps new little tweaks get entirely applied fresh.

Hi,

I use latest v9 update in my SE NEO MT15i running ICS.
However, when I use SPB 3d launcher I only get 50% supercharge allthough I do get 100% supercharge with stock launcher (With the modified services.jar and .odex files)

I was wondering if it would be possible to make this compatable with spb launcher or not?

If anyone knows what I need to do to sort this out please PM me or let me know here if its not possible

cheers

Okay, I get a weird bug after updating to CM9 Beta 4 on my Desire Z:

First, I got asked if I wanted to re-supercharge using ", , , , , ," which I declined Afterwards it told me that my current minfrees were "1, 1, 1, 1, 1, 1 MB MB MB".

Trying to apply new minfrees gives me
...9_RC8.2.sh[5587]: *256: unexpected '*'

I tried re-downloading it to make sure the file didn't get corrupted from updating. But the results are the same. Any ideas?

i installed v6 on defy+ but every time it shows 50% supercharged how to increase it to 100% ?

Originally Posted by Semaphor_

Okay, I get a weird bug after updating to CM9 Beta 4 on my Desire Z:

First, I got asked if I wanted to re-supercharge using ", , , , , ," which I declined Afterwards it told me that my current minfrees were "1, 1, 1, 1, 1, 1 MB MB MB".

Trying to apply new minfrees gives me
...9_RC8.2.sh[5587]: *256: unexpected '*'

I tried re-downloading it to make sure the file didn't get corrupted from updating. But the results are the same. Any ideas?

I've had very similar results when the script seems to get into a state where the previous minfrees were some crazy values. I found picking one of the defaults then choosing the calculator again will get me back to sane values.

Sent from my PG41200 using Xparent Purple Tapatalk 2

Is there any tweak done to increase touch sensitivity? I feel the touch sensitivity has increased after applying v6

I'm getting FC'S like crazy. I set it to fix at boot... Idk what it is. Also, when I exit the script it says Bash couldn't be found...


Sent From My HTC Evo 3D, On The Now Network From Sprint!

Originally Posted by SaintTigger

Sorry, I am running the most current version.

Sent from my C771 using Tapatalk

About wpa_supplicant.conf not being found... can you type in terminal:
su
find / -iname *supplicant*
And post the result? Ignore any hits on sdcard if there are any.

Originally Posted by zzandrewst

I just flashed an updated rom last night and was getting this in my min frees as well. I updated my busybox to the wraithdu version, unsupercharged and ran the calculator again and the problem seems to be fixed. The rom that I flashed contained updated vendor propriety files (5.7.906), so I don't know if these caused the problem maybe

Crappy Ass BusyBox build...

Originally Posted by Semaphor_

Okay, I get a weird bug after updating to CM9 Beta 4 on my Desire Z:

First, I got asked if I wanted to re-supercharge using ", , , , , ," which I declined Afterwards it told me that my current minfrees were "1, 1, 1, 1, 1, 1 MB MB MB".

Trying to apply new minfrees gives me
...9_RC8.2.sh[5587]: *256: unexpected '*'

I tried re-downloading it to make sure the file didn't get corrupted from updating. But the results are the same. Any ideas?

Another Crappy Ass BusyBox build...

Is that the complete error?
I should add something to the driving test.

Also, what were the real minfrees?

Originally Posted by Pmakaasrul

Please im very sorry to ask such nooby question...
i recently apply V6 SuperCharger on my xperia pro with kernel made by riyal.
Im currently in confuse since i check the v6 script dont run in my system as if the setting for it is applied(during installation of the script) but 99supercharger dont run
it is not supported?i included the change log

if anyone could help me please


P/S:i ran

cat /proc/*/cmdline | grep Super

on terminal(su) and get only Super which mean supercharge not supercharging my android

Well you have the Ran_SuperCharger file so it ran.
Don't the minfrees match?

Originally Posted by fatchick1o9

just to be safe, I always unsuprercharge completely, delete all !xxxxxxxx.sh scripts, make sure no supercharger stuff is in init.d, reboot the phone Supercharge then SuperClean and reboot.

probably not entirely necessary, but I just like to make sure everything is cleaned up and all of zepps new little tweaks get entirely applied fresh.

heh... yeah sometimes I tweak the add-on scripts...

Originally Posted by gregbradley

Hi,

I use latest v9 update in my SE NEO MT15i running ICS.
However, when I use SPB 3d launcher I only get 50% supercharge allthough I do get 100% supercharge with stock launcher (With the modified services.jar and .odex files)

I was wondering if it would be possible to make this compatable with spb launcher or not?

If anyone knows what I need to do to sort this out please PM me or let me know here if its not possible

cheers

Post the bOOM Stick output... it is probably a launcher detection glitch.
Whatever is the default launcher is automatically protected no matter what.

Originally Posted by mmanojkry

i installed v6 on defy+ but every time it shows 50% supercharged how to increase it to 100% ?

Depends on what 50% is missing.

Originally Posted by Rydah805

I'm getting FC'S like crazy. I set it to fix at boot... Idk what it is. Also, when I exit the script it says Bash couldn't be found...


Sent From My HTC Evo 3D, On The Now Network From Sprint!

Try running with terminal and see if you still get the bash error.
You're the second person to mention this so I wonder if it's a script manager thing.

I'm using Supercharger Stater Kit 4, and RC 9 Test 5, when start the script I'm alway got "sh:bad number". Here is the screenshot..

- Samsung GT S5660 Galaxy Gio (RIP)
- Sony Ericsson ST18i Xperia Ray (Urushi)

Running the latest test RC. Great works Zepp. Thank you .