Best Alarm App for Android?

There are tons of choices to choose from when looking for a great alarm app for Android. While the stock … more

Unofficial CM12.1 Available for Moto E 2014

While Motorola is yet to release a final 5.0.2 build for the Moto E 2014, XDA Senior … more

Pinsy Brings Social Sketching To Your Watch & Phone

Did you watch Apple’s VP draw on his wrist during the Apple Watch announcement … more

CyanogenMod 12.1 for Samsung Galaxy S5

Android 5.1 is slowly putting its mark in the custom ROM world. CyanogenMod 12.1 is available to … more
Post Reply Subscribe to Thread Email Thread

[GUIDE] SmartQ Z1 Lite unbrick / fix bootloop

15th September 2014, 06:54 PM   |  #11  
Junior Member
Thanks Meter: 0
 
8 posts
Join Date:Joined: Aug 2010
Perfect work! Now hold still trying to get to work with the latest update.
Any help for that i cannot get bluetooth on in lite ?
Last edited by Tohelo; 15th September 2014 at 07:23 PM.
17th September 2014, 09:57 AM   |  #12  
OP Junior Member
Thanks Meter: 3
 
12 posts
Join Date:Joined: Aug 2014
Quote:
Originally Posted by Tohelo

Perfect work! Now hold still trying to get to work with the latest update.
Any help for that i cannot get bluetooth on in lite ?

Hi Tohelo, thanks.

Try to download update.zip version 1.3 from official site (Click here!) and update by system upgrade. If u don't know how to, please tell me so I can write tutorial.
17th September 2014, 04:56 PM   |  #13  
Junior Member
Thanks Meter: 0
 
8 posts
Join Date:Joined: Aug 2010
Quote:
Originally Posted by HarisDev

Hi Tohelo, thanks.

Try to download update.zip version 1.3 from official site (Click here!) and update by system upgrade. If u don't know how to, please tell me so I can write tutorial.

Yeah I've done that and the installation is successful but now I have a problem that I can not get bluetooth turned on
17th September 2014, 11:06 PM   |  #14  
OP Junior Member
Thanks Meter: 3
 
12 posts
Join Date:Joined: Aug 2014
Quote:
Originally Posted by Tohelo

Yeah I've done that and the installation is successful but now I have a problem that I can not get bluetooth turned on

I will see tomorrow, i have some tasks to do..
27th November 2014, 11:48 PM   |  #15  
Junior Member
Thanks Meter: 0
 
2 posts
Join Date:Joined: Nov 2014
really need help
[QUOTE=HarisDev;55009139]Hi guys, I saw that so much people have problem with SmartQ Z1 Lite. However, after few days watch becomes slow and it just have bootloop. I had same problem for weeks, until I found a way to fix it.
Notice! This tutorial is for LITE verrsion only, full version have it's own unbrick tool.

- Download the tools from attachment (end of thread)
- Make new folder on desktop and extract the downloaded .zip to that folder


1. STEP Entering the nexus

- Turn off the watch, make sure that is completely off (plug in the usb cable and check if your machine detects it)
- After that plug in usb cable and press the Power and Back button on watch together for few seconds, your PC will detect it as USB boot device or something
- Go to device manager and right click on that device and update driver software, browse computer and then Let me pick the button..
Click on All devices and then Have disk, browse to the tool folder and 32/64 bit usb driver and choose ini file
Install that driver.

- Unplug usb cable

2. STEP Preparing the savior

- Open TabControl.exe and right click on anywhere on tool, and then click Config
- Click on Import config and find the folder you extracted tool, then folder "ini" and choose the Jz4775--Nand-FINAL.ini
- Then click Manual config and where is uboot on the right "..." browse for the x-boot-nand.bin
- For uimage choose recovery.img
- And then click OK, and don't save the config

3. STEP Let the battle begins

- Plug in USB cable and the tool should start flashing new recovery
- Wait few minutes and it should write Successfull
- After that watch should turn off, unplug and plug in cable again
- Hold the power button for few seconds until you get a charging interface, press back button and hold, and then power button and hold untill it vibrates
- You should see factory upgrade interface and new removable disc should be in computer
- Copy the update.zip from required_flash_files/ folder to new removable disc.
- Now press the back button, and then again where is "Upgrade", your watch should get upgraded

Aaand voilaa!

My watch is working and everynotification works but theres a problem where it says the application smartwatchlauncher stopped workig so i cant do anything including accessing settings but i get notifications and i cannot upgrade how will i fix this
11th December 2014, 09:29 PM   |  #16  
OP Junior Member
Thanks Meter: 3
 
12 posts
Join Date:Joined: Aug 2014
http://www.smartdevices.com.cn/suppo...1litev1.5.html

Download this and flash update.zip
14th December 2014, 03:55 AM   |  #17  
Junior Member
Thanks Meter: 0
 
1 posts
Join Date:Joined: Dec 2014
its asking for a decryption key what is it also my computer wont dowload the other one because it says it a virus
20th March 2015, 07:14 AM   |  #18  
Junior Member
Thanks Meter: 0
 
1 posts
Join Date:Joined: Mar 2015
Hi,
I'm having trouble in the last point of the first step.
I can only choose inf files, not ini files.
I am pretty sure i am following the steps right but i get stuck on that part.

Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes