Major Security Issues Found in New Outlook App

The Outlook app was launched yesterday on iOS and Android, and according to an IBM developer … more

LG G4 Could Feature a… 3K Display?

According to myLGphones, a version of the LG G4 will not feature neither a 2K nor a 4K display … more

What’s the Worst Android Phone You’ve Ever Owned?

All of us here at XDAappreciate just how far Androidhas come. The incredible … more

All You Need to Know About NFC Implants

Yes, this is a guide about putting an NFC chip inside your body.If you want to learn how to undergo … more

Welcome to XDA

Search to go directly to your device's forum

Register an account

Unlock full posting privileges

Ask a question

No registration required
Post Reply

[Q] Replacing a Xperia Z1 Cracked Digitizer

OP Akash434

15th August 2014, 08:23 AM   |  #1  
OP Member
Thanks Meter: 0
35 posts
Join Date:Joined: Feb 2011
Hello everyone!

I bought a Xperia Z1 two weeks ago, and it was the best phone I have ever had.

However my idiot brother Managed to crack the Digitizer a few days back, the display is still working and the phone powers up but the touch panel is unresponsive.

(He was playing with one of those Heavy Snake Egg magnets, he threw the magnet into the air, and landed right on my phone. I'm surprised the Display is still working. )

Anyways, I was wondering if anyone here has replaced only the Touch Panel. I know on the Xperia Z1 its fused with the LCD, however with a machine like the Scotle PR-1000 its possible to separate the LCD from the touch panel.

Here is the link to a video showing the process:

Now I have a few questions such as:
-With this method, wont the LCD display be scratched up as well?
-When I replace the touch screen with a new touch panel using this method, will it look normal? Or will it look like it has been opened and repaired?
-With a new digitizer, is the phone still waterproof capable? (I dont really care about the waterproof capabilities that much anyways.)

17th August 2014, 04:32 PM   |  #2  
OP Member
Thanks Meter: 0
35 posts
Join Date:Joined: Feb 2011
Can anyone help me?
17th August 2014, 05:56 PM   |  #3  
WEM97's Avatar
Senior Member
Flag Redmond
Thanks Meter: 894
974 posts
Join Date:Joined: Jun 2011
Donate to Me
You could just replace the entire display module, digitizer, LCD, and all. This would be the cleaner and easier way of replacing it with fewer potential problems. As far as waterproofing goes, I am not sure. Those are sort of uncharted waters (no pun intended) as far as repairs go. If I were you, I would assume not just to be on the safe side, until further knowledge presented itself. I hope this info helps!
The Following User Says Thank You to WEM97 For This Useful Post: [ View ]
21st August 2014, 08:29 AM   |  #4  
OP Member
Thanks Meter: 0
35 posts
Join Date:Joined: Feb 2011
FOr the past few days thats what I was thinking.
Especially since where I live most Cellphone "technicians" are just people with a very limited knowledge of electronics, and would most probably mess up the phone even further.

after placing a few calls to some shops I managed to find a replacement LCD+Digitizer+Frame, but I do not know how good the quality of the replacement unit would be.
16th October 2014, 10:04 PM   |  #5  
Junior Member
Flag The Hague
Thanks Meter: 0
2 posts
Join Date:Joined: Jun 2009
Dear WEM97 and other users,

I have the same problem as Akash434. Could you please briefly elaborate on what the (potential) problem could be with just replacing the Digitizer. I can't really decide what to replace the LCD+Digitizer or only Digitizer. I understand replacing the whole LCD unit along is a far, far easier process. But cost wise it's also almost the double (atleast where i live).
Upon removing the Digitizer, should the old glue be removed (if any). What kind of glue should I use to stick the new Digitizer? Will u see that there was glue used? These are just a few questions I am struggling with.
Your help is greatly appreciated.

PS: I apologize for any grammar mistakes. English is not my native language.
19th October 2014, 10:44 PM   |  #6  
matalic's Avatar
Junior Member
Thanks Meter: 9
20 posts
Join Date:Joined: Jul 2014
you can't do this without a professional machine

This is my video and the description will send you to the links to fix it yourself

Otherwise get a shop to fix it... although most regular shops won't fix it... or get sony to fix it if you wanna continue your warranty
Post Reply Subscribe to Thread

digitizer, touchscreen, xperia z1
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes