******Factory Mode Fix In Mmx Canvas Nitro A310******
After flashing with ygdp tool or sp flash Tool if your cell become dead(Flashing goes OK up to 100%, but then phone does not boot, goes on "factory mode" and then a black screen with a blue square on top left saying"1.modem" and there is a "up" and"down" on the right). Then this method can make your phone alive... So don't be panic Follow These Steps:-
Download This Files Here
1. Download and extract all the Files in a folder that's easy to find
2. On ur Phone then connect it to a PC
3. Open cmd to run as administrator
4. type adb shell
5. Type
Quote:
-b fctd normal or fctest system reboot
6.Press Enter
7. Phone will restart automatically,
8. Click "unFactroy Mode.bat" when open cmd screen press Enter, wait for it to finish and then press Enter again, Phone again will restart automatically and return to normal
Credits:-
Me,Amit & Ho4x
After flashing with ygdp tool or sp flash Tool if your cell become dead(Flashing goes OK up to 100%, but then phone does not boot, goes on "factory mode" and then a black screen with a blue square on top left saying"1.modem" and there is a "up" and"down" on the right). Then this method can make your phone alive... So don't be panic Follow These Steps:-
Download This Files Here
1. Download and extract all the Files in a folder that's easy to find
2. On ur Phone then connect it to a PC
3. Open cmd to run as administrator
4. type adb shell
5. Type
Quote:
-b fctd normal or fctest system reboot
6.Press Enter
7. Phone will restart automatically,
8. Click "unFactroy Mode.bat" when open cmd screen press Enter, wait for it to finish and then press Enter again, Phone again will restart automatically and return to normal
Credits:-
Me,Amit & Ho4x
Dont Forget To Press Thanks
Last edited: