AS WITH ANY UNSUPPORTED SYSTEM MODIFICATIONS, USING THIS MAY LEAD TO A BRICK
IF YOU DON'T KNOW WHAT YOU ARE DOING ( HAVEN'T BRICKED MY SYSTEM YET! ) PLEASE
BE AWARE THAT NO ONE ON THE INTERNET IS RESPONSIBLE FOR ANY DAMAGE TO YOUR
UNIT. ANY PROBLEMS WILL BE CONSIDERED ACTS OF WHATEVER GOD YOU BELIEVE IN.
For FYT SoM (5009/6011/6021/6022/6023) based JOYING / Intel SoFIA units ONLY!
Hello, here is a custom rom based on the SYU Stock Build [sofia3gr_car_64-userdebug 6.0.1 MMB29M eng.bsp.20180110.181524 release-keys]
Your Head Unit MUST ALREADY BE ROOTED! You must be able to obtain Super User access within Android!
Due to Bluetooth, WiFi, and as well as nvram patches in the ROM and bootloader, you must be running Joying 6.0 firmware dated 2017_12_15 or later to install this ROM.
Why this ROM? Simple answer: It's makes your Head Unit faster than running the stock ROM's, has updated Google Apps, and has the bloat removed! It's pre-rooted also!
Step 1: Unzip the contents to the root of your USB flash drive on your computer, then plug the flash drive into the Joying unit via USB.
Step 2. Use the Android helper application "custom" to install. Download from link below, either on the Head Unit itself, OR on PC and transfer using ADB. Once installed, open the program, and grant superuser privileges when prompted, you'll be presented with screen as here:
Step 3: Click INSTALL CUSTOM. Wait for output to say recovery successfully installed!
If you wish to preserve your /data, AKA dirty-flash, click on "Do not wipe data" at this point to prevent your data partition from being wiped.
ALL EXISTING DATA ON UNIT WILL BE ERASED. THIS IS A CLEAN INSTALLATION!
Step 4: click REBOOT TO INSTALL GTX ROM - Your Joying unit will reboot, and installation will automatically proceed through TWRP.
(NOTE! The ROM automatically re-installs stock recovery during installation, so if something goes wrong, you can always restore to the original JOYING firmware.)
RESTORE STOCK - Restores the original stock recovery
INSTALL CUSTOM - Installs superdave's custom recovery (needed to install this ROM)
VERIFY RECOVERY - tells you which recovery you have installed
(all options on this menu work only if you have custom recovery installed)
"Do Not Wipe Data" Switch - enable this to prevent your /data partition from being wiped when installing the ROM. (Your results may vary. Works for me!)
REBOOT TO TWRP - Reboots to TWRP home screen allowing you to do things
INSTALL GTX ROM- installs joying_gtx stock rom from installation media
Exit - exit custom
====Includes==== xposed v87 x86 open gapps x86 Nano Feb 2018 ViPER4ANDROID FX precompiled dalvik cache (first boot 2 minutes) enabled eth0 at boot at 192.168.65.100 for debugging ADB enabled SeSuperuser built-in Included [custom] app to manage superdavex's custom recovery for easy installation and maintenance RightCamera (front cam app) modified APK AOSP android boot animation Interactive cpu governor: go_highspeed_load set at 70% CPU load titanium backup nova launcher GVC CallHandler 4 Joying Amaze File Manager Xposed modules: boot manager gravitybox no overlay warning immsersive mode forcer app settings fake wifi GPSSpeedFix ======Removed====== Debug Services: usbactive sqldebug pekallfmrserver watchdog ap_logfs apk_logfs log-watch crashlogd adbusbmuxd adbec bootwatcher shcmd fmd Removed Apps: BasicDreams BluetoothMidiService Exchange2 Galaxy4 HoloSpiralWallpaper LiveWallpapers LiveWallpapersPicker NoiseField OpenWnn PhaseBeam PrintSpooler GooglePinyinIME RKUpdateService CaptivePortalLogin WAPPushManager removed from /system-priv-app ManagedProvisioning CallLogBackup OemTelephonyApp DeviceTest StressTest WallpaperCropper GoogleFeedback ProxyHandler CellBroadcastReceiver Removed FYT APPS ( these slow the system down considerably, even when not in use ) SYU-1-C9-Calculator-V1.0 Sofia-1-C9-TV-V1.0 JY-1-C9-Video-V1.0 JY-1-C9-TimeWeather-V1.0 SYU-1-FileManager-V1.0 SYU-1-C9-Update-V1.0 Sofia-1-C9-ExDvr-V1.0 SYU-1-C5009-DVR-V1.0 Sofia-1-C9-Gallery-V1.0 JY-1-C9-MUSIC-V1.0 ZBox
Installer ( unzip, this will help you install the ROM on a STOCK, un-rooted Head Unit ) :
https://github.com/gtxent/custom source code
V9 ALPHA 3