This is the Dolby Atmos ported from LeTv, BQ, and ZTE phone's stock Marshmallow ROM. This should work on all devices (starting from Marshmallow) since it is a software effect. It might conflict with other effects you've already installed. However, it has been extensively tested working alongside ViPER4Android, Maxxaudio, and HTC M9/10 Dolby on several ROM/device combinations. Flash the zip, it will edit and patch (not overwrite) your audio_effects.conf. Currently selinux permissive is recommended.
I understand the UI looks like the old Dolby Digital Plus, but I can assure you that it is much much better. This Atmos is a much more updated version than ones previously released on the Lenovo K3/K4 Note. The Axon 7 Dolby Atmos utilizes both software and hardware components of your device, which means it processes in a much more powerful manner with much more precision and quality and a more natural soundscape. My Lenovo K4 Atmos and @worstenbrood Lenovo A7000 (6.5) Atmos both utilize solely a software emulation which results in a more artificial sound experience (that is not as good). However with Axon 7 Atmos version, you will see more realistic sound. When you listen to it you will hear the difference immediately in comparison to other versions. TheLepro 3, LeMax 2, and Aquaris X5 Dolby Atmos both only utilize a software effect, however they both sound nearly as good as the Axon 7 Dolby Atmos and are more compatible.
These installers utilize my Unified installer that can install on Magisk OR System if Magisk is not detected (with Pixel support). It utilizes my Magisk framework called Audio Modification Library that allows that installation of multiple audio mods without having compatibility issues with one another's audio config file changes (this is a Magisk limitation, however AudModLib solves this issue). I do not support any other audio mod, and if Magisk, I do not support any mod mod that does not utilize my AudModLib.
Check out my AudModLib thread and GitHub
Current Version Changelog (v3.2):
- Updated to AudModLib v2.2. See AudModLib Thread for full changelogPrevious Changelogs:
- Updated to AML v2.1
- Updated to AudModLib v2.0
- Updated to AudModLib v1.4
- Install script changes that include: major update to Pixel (A/B OTA) support, mounting changes, improved script efficiency, fixes & consolidation, and cosmetic fixes
- Add/fix proper addon.d support
- Updated to AudModLib v1.3
- Remove (audmodlib)service.sh and replace with post-fs-data(.d) audmodlib.sh, which should fix when root may be lost upon installing certain mods
- Remove force SELinux Permissive post-fs-data script "setenforce 0"
- System install will now have the same script updates as the AudModLib v1.3 to allow to work in SELinux Enforcing
- Added audmodlib.sh post-fs-data.d script
- Install script fixes
- post-fs-data.d script fixes
- Push AudModLib v1.2 hotfixes
- Updated to Audio Modification Library v1.1
- Initial Magisk release
[UPDATED] Lenovo A7000 [6.5] Atmos (1.1.4)
This is the most compatible of all the Dolby Atmos ports. GitHub
[UPDATED] LeEco LePro 3 Atmos (2.3.a.12_r0)
This is the second most compatible of all the Dolby Atmos ports. GitHub
[UPDATED] LeEco LeMax 2 Atmos (2.3.a.12_r0)
This is the third most compatible of all the Dolby Atmos ports. GitHub
[UPDATED] BQ Aquaris X5 Atmos (184.108.40.206_r1)
This is the fourth most compatible of all the Dolby Atmos ports. GitHub
[UPDATED] ZTE Axon 7 Atmos (220.127.116.11_r1)
This is the fifth most compatible of all the Dolby Atmos ports. GitHub
When you've chosen the one you're going to use, download and flash the installer provided above. TWRP is recommended, but I'm sure CM Recovery, Philz, and CWM work just fine. Flashfire is tested as working. If you have Magisk you can use the Magisk Manager. Each Dolby Atmos above comes from different devices AND manufacturers. SELinux enforcing works unless not using magisk or supersu, in which case init.d support or SELinux Permissive is required. Flash LePro 3 version if and if that does not work flash LeMax 2 version. If it does not work then flash BQ Aquaris version third. If that one doesn't work flash Axon version fourth. If Axon version does not work then you need to flash A7000-6.5 versions. If that doesn't work then I'm sorry, provide a log as I am looking in to fixes. You should be able to flash on top of one another without causing any issues.
Flash the same version of the installer to uninstall or add "uninstall" anywhere to the zip name and flash in recovery. You can also delete the module via Magisk Manager and reboot.
Credits of Originality:
- LeEco (LeTv)
- I ported the app myself and made the changes necessary for it to work without FC on most devices
WARNING: Permission to use this for your own mod is and will never be granted to anyone. If you would like to use my files for your ROM, and only your ROM, please contact me to obtain permission before doing so. By not adhering to my strict policies, you are in violation and the issue will be forwarded promptly to a moderator. You can thank kangers.
Collective Dolby Atmos® Port Thread, App for all devices (see above for details)
ahrion, worstenbrood, zackptg5, @worstenbrood (teaching me everything I know) @Yoinx (helping hax headphone smali bug)
Source Code: https://github.com/therealahrion/Col...by-Atmos-Ports
Current Stable Version: v3.2
Stable Release Date: 2017-11-08
Last Updated 2017-11-08