Just pulled from my pono player which is based on android (API Level 10)
For people rocking linux and want to update theyre Pono to the latest Firmware 1.0.3 put this file on your ponoplayer drive in .pono/
MIND THE LEADING DOT.
Reboot you're player afterwards and updating should start
DISCLAIMER:
im not responsible for bricks, i just pulled this file as is from my pono.
There wasnt any modification done.
https://file-cloud.eu/public.php?service=files&t=8a42782613be966425cbb4e65290788a
Maybe someone can have a look at it and find out how to enable adb in this rom?
Some additional Device info:
partition table:
DMESG:
Mounted FileSystems:
build.prop:
recovery last_log: http://pastebin.com/zqKy119L
LOGCAT: http://pastebin.com/JjD2KjTR
For people rocking linux and want to update theyre Pono to the latest Firmware 1.0.3 put this file on your ponoplayer drive in .pono/
MIND THE LEADING DOT.
Reboot you're player afterwards and updating should start
DISCLAIMER:
im not responsible for bricks, i just pulled this file as is from my pono.
There wasnt any modification done.
https://file-cloud.eu/public.php?service=files&t=8a42782613be966425cbb4e65290788a
Maybe someone can have a look at it and find out how to enable adb in this rom?
Some additional Device info:
partition table:
Code:
major minor #blocks name
31 0 512 mtdblock0
31 1 1920 mtdblock1
31 2 128 mtdblock2
31 3 4096 mtdblock3
31 4 517632 mtdblock4
179 0 61063168 mmcblk0
179 1 128 mmcblk0p1
179 2 512 mmcblk0p2
179 3 128 mmcblk0p3
179 4 8192 mmcblk0p4
179 5 8192 mmcblk0p5
179 6 262144 mmcblk0p6
179 7 262144 mmcblk0p7
179 8 131072 mmcblk0p8
179 9 131072 mmcblk0p9
179 10 60259072 mmcblk0p10
179 16 62367744 mmcblk1
179 17 62351360 mmcblk1p1
DMESG:
Code:
<5>Linux version 2.6.37 (daveg@ubuntu) (gcc version 4.4.3 (GCC) ) #1 Wed Nov 5 16:36:29 PST 2014
<4>CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
<4>CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>Machine: OMAP3 Beagle Board
<6>Reserving 8388608 bytes SDRAM for VRAM
<4>Memory policy: ECC disabled, Data cache writeback
<6>OMAP3630 ES1.2 (l2cache sgx neon isp 192mhz_clk )
<6>SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
<7>On node 0 totalpages: 63488
<7>free_area_init_node: node 0, pgdat c05e19e4, node_mem_map c06ad000
<7> Normal zone: 512 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 62976 pages, LIFO batch:15
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>pcpu-alloc: [0] 0
<4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62976
<5>Kernel command line: console=ttyO2,115200n8 androidboot.console=ttyO2 mem=256M init=/init ip=off omap_vout.vid1_static_vrfb_alloc=y vram=8M omapfb.vram=0:8M
<6>PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Memory: 248MB = 248MB total
<5>Memory: 243884k/243884k available, 18260k reserved, 0K highmem
<5>Virtual kernel memory layout:
<5> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5> DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
<5> vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB)
<5> lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
<5> modules : 0xbf000000 - 0xc0000000 ( 16 MB)
<5> .init : 0xc0008000 - 0xc003c000 ( 208 kB)
<5> .text : 0xc003c000 - 0xc059e000 (5512 kB)
<5> .data : 0xc059e000 - 0xc05e6e80 ( 292 kB)
<6>NR_IRQS:409
<6>Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
<6>Reprogramming SDRC clock to 400000000 Hz
<3>dpll3_m2_clk rate change failed: -22
<6>IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
<6>Total of 96 interrupts on 1 active controller
<6>GPMC revision 5.0
<4>Trying to install interrupt handler for IRQ402
<4>Trying to install interrupt handler for IRQ403
<4>Trying to install interrupt handler for IRQ404
<4>Trying to install interrupt handler for IRQ405
<4>Trying to install interrupt handler for IRQ406
<4>Trying to install interrupt handler for IRQ407
<4>Trying to install interrupt handler for IRQ408
<3>Trying to install type control for IRQ409
<3>Trying to set irq flags for IRQ409
<6>OMAP clockevent source: GPTIMER12 at 32768 Hz
<4>Console: colour dummy device 80x30
<6>Calibrating delay loop... 503.12 BogoMIPS (lpj=1966080)
<6>pid_max: default: 32768 minimum: 301
<6>Security Framework initialized
<4>Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<6>regulator: core version 0.5
<6>regulator: dummy:
<6>NET: Registered protocol family 16
<6>OMAP GPIO hardware version 2.5
<6>OMAP GPIO hardware version 2.5
<6>OMAP GPIO hardware version 2.5
<6>OMAP GPIO hardware version 2.5
<6>OMAP GPIO hardware version 2.5
<6>OMAP GPIO hardware version 2.5
<6>omap_mux_init: Add partition: #1: core, flags: 0
<6>OMAP3 Pono Rev: A
<6>Found NAND on CS0
<6>Registering NAND on CS0
<3>Unable to get DVI reset GPIO
<6>hw-breakpoint: debug architecture 0x4 unsupported.
<6>OMAP DMA hardware revision 5.0
<4>bio: create slab <bio-0> at 0
<6>regulator: vdd_tp: 3300 mV normal
<6>regulator: EMMC_3V3: 3300 mV normal
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>omap_i2c omap_i2c.1: bus 1 rev4.0 at 2600 kHz
<6>twl4030: PIH (irq 7) chaining IRQs 368..375
<6>twl4030: power (irq 373) chaining IRQs 376..383
<6>twl4030: gpio (irq 368) chaining IRQs 384..401
<6>regulator: VUSB1V5: 1500 mV normal standby
<6>regulator: VUSB1V8: 1800 mV normal standby
<6>regulator: VUSB3V1: 3100 mV normal standby
<6>twl4030_usb twl4030_usb: Initialized TWL4030 USB module
<6>regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
<6>regulator: VDAC: 1800 mV normal standby
<6>regulator: VAUX2_4030: 2500 mV normal standby
<6>regulator: VDVI: 1800 mV normal standby
<6>regulator: VAUX3: 1800 mV normal standby
<6>regulator: VAUX4: 1800 mV normal standby
<4>omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517
<6>omap_i2c omap_i2c.2: bus 2 rev4.0 at 100 kHz
<6>omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz
<6>Advanced Linux Sound Architecture Driver Version 1.0.23.
<6>Switching to clocksource 32k_counter
<6>musb-hdrc: version 6.0, otg (peripheral+host), debug=0
<6>musb-hdrc musb-hdrc.0: dma type: dma-inventra
<7>musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
<7>musb-hdrc: MHDRC RTL version 1.800
<7>musb-hdrc: setup fifo_mode 4
<7>musb-hdrc: 28/31 max ep, 16384/16384 memory
<6>musb-hdrc musb-hdrc.0: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 8192 bind 8192)
<6>TCP reno registered
<6>UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>NET: Registered protocol family 1
<6>Trying to unpack rootfs image as initramfs...
<6>Freeing initrd memory: 940K
<4>NetWinder Floating Point Emulator V0.97 (double precision)
<4>omap_init_opp_table: no hwmod or odev for iva, [6] cannot add OPPs.
<6>omap-iommu omap-iommu.0: isp registered
<6>ashmem: initialized
<5>VFS: Disk quotas dquot_6.5.2
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
<7>yaffs: yaffs built Nov 5 2014 16:36:02 Installing.
<6>msgmni has been set to 478
<6>io scheduler noop registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>OMAP DSS rev 2.0
<6>OMAP DISPC rev 3.0
<7>tm024hbz79 spi3.0: tm024hbz79_spi_probe
<7>panel-tm024hbz79 display0: tm024_panel_probe
<7>tm024hbz79 spi3.0: LCD panel not enabled by bootloader (status 0x610000)
<7>tm024hbz79 spi3.0: MIPI display ID: 000000
<6>tm024hbz79 spi3.0: omapfb: tm024hbz79 rev 00 LCD detected
<3>get_hw_cabc_mode: enter...
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<6>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
<6>omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
<6>omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
<6>console [ttyO2] enabled
<6>omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
<6>brd: module loaded
<6>loop: module loaded
<3>mtdoops: mtd device (mtddev=name/number) must be supplied
<6>omap2-nand driver initializing
<6>NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron )
<6>NAND BCH ECC SW Init complete
<5>Creating 5 MTD partitions on "omap2-nand.0":
<5>0x000000000000-0x000000080000 : "X-Loader"
<5>0x000000080000-0x000000260000 : "U-Boot"
<5>0x000000260000-0x000000280000 : "U-Boot Env"
<5>0x000000280000-0x000000680000 : "Kernel"
<5>0x000000680000-0x000020000000 : "File System"
<6>OneNAND driver initializing
<6>usbcore: registered new interface driver asix
<6>usbcore: registered new interface driver cdc_ether
<6>usbcore: registered new interface driver smsc95xx
<6>usbcore: registered new interface driver net1080
<6>usbcore: registered new interface driver cdc_subset
<6>usbcore: registered new interface driver zaurus
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>android init
<6>android_probe pdata: c05aeb0c
<6>android_bind
<7>android_bind_config
<6>android_usb gadget: android_usb ready
<6>musb-hdrc musb-hdrc.0: MUSB HDRC host driver
<6>musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 1
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: MUSB HDRC host driver
<6>usb usb1: Manufacturer: Linux 2.6.37 musb-hcd
<6>usb usb1: SerialNumber: musb-hdrc.0
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
<6>f_adb init
<6>android_register_function adb
<6>f_mass_storage init
<6>fsg_probe pdev: c05ae910, pdata: c05aebd4
<6>android_register_function usb_mass_storage
<6>android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>android_usb gadget: Number of LUNs=2
<6> lun0: LUN: removable file: (no medium)
<6> lun1: LUN: removable file: (no medium)
<6>mice: PS/2 mouse device common for all mice
<6>input: gpio-keys as /devices/platform/gpio-keys/input/input0
<6>ft5x06_init() - FT I2C Touchscreen Driver (Built Nov 5 2014 @ 16:36:01)
<7>ft5x06_reset_panel_via_gpio() - Toggling GPIO 42 to reset the Touch Panel...
<6>android_usb gadget: high speed config #1: android
<4>omap_device: omap_i2c.2: new worst case activate latency 0: 30517
<6>ft5x06_probe() - FT5x06 found on I2C bus.
<6>input: ft5x06-i2c as /devices/platform/omap/omap_i2c.2/i2c-2/2-0038/input/input1
<6>ft5x06_initialize() - sysfs_create_group() succeeded.
<6>Bosch Sensortec Device detected!
<6>bma220 registered I2C driver!
<6>input: acc as /devices/virtual/input/input2
<6>using rtc device, twl_rtc, for alarms
<6>twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
<6>i2c /dev entries driver
<6>Linux media interface: v0.10
<6>Linux video capture interface: v2.00
<6>max17040 2-0036: MAX17040 Fuel-Gauge Ver 02
<3>bq24073-chgr bq24073-chgr: Initialized
<7>bq24073-chgr bq24073-chgr: bq24392_charger_work: 0
<6>OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
<3>twl4030_wdt twl4030_wdt: Failed to register misc device
<4>twl4030_wdt: probe of twl4030_wdt failed with error -16
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<7>Registered led device: pono::light
<6>omap_pwm_led omap_pwm_led: OMAP PWM LED (pono::lcd) at GP timer 11/0
<7>Registered led device: pono::lcd
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>logger: created 64K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 64K log 'log_radio'
<6>logger: created 64K log 'log_system'
<6>exFAT: FS Version 1.2.4
<6>exFAT: Core Version 1.2.4
<6>usbcore: registered new interface driver snd-usb-audio
<6>OMAP3 Pono SoC init
<6>ALSA device list:
<6> No soundcards found.
<6>oprofile: hardware counters not available
<6>oprofile: using timer interrupt.
<6>TCP cubic registered
<6>Initializing XFRM netlink socket
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<5>Registering the dns_resolver key type
<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
<6>ThumbEE CPU extension supported.
<3>Power Management for TI OMAP3.
<6>smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
<6>smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
<6>SmartReflex Class3 initialized
<6>clock: disabling unused clocks to save power
<6>mmc0: new high speed MMC card at address 0001
<6>mmcblk0: mmc0:0001 CWBC3R 58.2 GiB
<4>Alternate GPT is invalid, using primary GPT.
<6> mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
<7>panel-tm024hbz79 display0: tm024_panel_enable
<7>panel-tm024hbz79 display0: tm024_panel_power_on
<4>omapdss DPI: Could not find exact pixel clock. Requested 6200 kHz, got 6171 kHz
<7>tm024hbz79 spi3.0: panel_setup
<3>set_sleep_mode: enter...
<4>mmc1: host does not support reading read-only switch. assuming write-enable.
<3>set_display_state: enter...
<6>mmc1: new high speed SDHC card at address e624
<6>mmcblk1: mmc1:e624 SL64G 59.4 GiB
<6> mmcblk1: p1
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<4>regulator_init_complete: incomplete constraints, leaving VAUX3 on
<4>regulator_init_complete: incomplete constraints, leaving VDAC on
<6>twl_rtc twl_rtc: setting system clock to 2000-01-11 17:18:42 UTC (947611122)
<7>panel-tm024hbz79 display0: tm024_panel_enable
<7>panel-tm024hbz79 display0: tm024_panel_power_on
<7>panel-tm024hbz79 display0: tm024_panel_enable
<7>panel-tm024hbz79 display0: tm024_panel_power_on
<6>omap_vout omap_vout: Buffer Size = 3686400
<6>omap_vout omap_vout: : registered and initialized video device 0
<6>omap_vout omap_vout: Buffer Size = 3686400
<6>omap_vout omap_vout: : registered and initialized video device 1
<6>Freeing init memory: 208K
<6>EXT4-fs (mmcblk0p7): recovery complete
<6>EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
<6>EXT4-fs (mmcblk0p9): recovery complete
<6>EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
<4>EXT4-fs (mmcblk0p8): warning: maximal mount count reached, running e2fsck is recommended
<6>EXT4-fs (mmcblk0p8): recovery complete
<6>EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
<4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<4>omap_device: smartreflex.1: new worst case activate latency 0: 30517
<7>ft5x06_tpreset_show() - Resetting Touch Panel
<7>ft5x06_reset_panel_via_gpio() - Toggling GPIO 42 to reset the Touch Panel...
<6>asoc: ponoaudio-hifi <-> omap-mcbsp-dai.1 mapping ok
<3>init: cannot find '/system/bin/sgx/rc.pvr', disabling 'pvr'
<4>omap_device: smartreflex.0: new worst case deactivate latency 0: 30517
<4>omap_device: omap_i2c.3: new worst case activate latency 0: 61035
<4>omap_device: omap_uart.3: new worst case deactivate latency 0: 30517
<4>omap_device: omap_uart.3: new worst case activate latency 0: 30517
<6>warning: `zygote' uses 32-bit capabilities (legacy support in use)
<6>request_suspend_state: wakeup (3->0) at 11983917243 (2000-01-11 17:18:51.062377931 UTC)
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<4>omap_device: omap_uart.2: new worst case activate latency 0: 457763
<4>[EXFAT] trying to mount...
<4>[EXFAT] mounted successfully
<4>omap_device: omap_uart.2: new worst case activate latency 0: 915527
<4>omap_device: omap_uart.2: new worst case activate latency 0: 4455566
<4>omap_device: omap_uart.2: new worst case activate latency 0: 4547119
<4>omap_device: omap_uart.2: new worst case activate latency 0: 4791259
<4>omap_device: omap_uart.2: new worst case activate latency 0: 4821777
<4>omap_device: omap_uart.3: new worst case activate latency 0: 6225585
<4>omap_device: omap_uart.2: new worst case activate latency 0: 6988525
<4>omap_device: omap_i2c.2: new worst case deactivate latency 0: 91552
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<4>omap_device: omap_uart.2: new worst case activate latency 0: 7354736
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<6>EXT4-fs (mmcblk0p7): re-mounted. Opts: (null)
<6>EXT4-fs (mmcblk0p7): re-mounted. Opts: (null)
<4>omap_device: omap_uart.2: new worst case activate latency 0: 8178710
<4>omap_device: omap_uart.2: new worst case activate latency 0: 10253906
<4>[EXFAT] trying to unmount...
<4>[EXFAT] unmounted successfully
<6>binder: 1310:1311 transaction failed 29189, size 84-0
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=0
<6>request_suspend_state: sleep (0->3) at 170425236611 (2000-01-11 17:21:29.503666784 UTC)
<6>ft5x06_suspend() - Driver is suspending.
<6>request_suspend_state: wakeup (3->0) at 267929729460 (2000-01-11 17:23:07.008190148 UTC)
<6>ft5x06_resume() - Driver is resuming.
<7>ft5x06_reset_panel_via_gpio() - Toggling GPIO 42 to reset the Touch Panel...
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<4>omap_device: omap_uart.2: new worst case activate latency 0: 11932373
<4>omap_device: omap_uart.2: new worst case activate latency 0: 13793945
<3>init: untracked pid 1691 exited
<4>omap_device: omap_uart.2: new worst case activate latency 0: 279388427
<4>[EXFAT] trying to mount...
<4>[EXFAT] mounted successfully
Mounted FileSystems:
Code:
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
/dev/block/platform/mmci-omap-hs.1/by-name/system /system ext4 ro,relatime,barrier=1,data=ordered 0 0
/dev/block/platform/mmci-omap-hs.1/by-name/userdata /data ext4 rw,relatime,barrier=1,data=ordered 0 0
/dev/block/platform/mmci-omap-hs.1/by-name/cache /cache ext4 rw,relatime,barrier=1,data=ordered 0 0
debugfs /sys/kernel/debug debugfs rw,relatime 0 0
/dev/block/vold/179:10 /mnt/internal vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:10 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
tmpfs /mnt/internal/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0
/dev/block/vold/179:17 /mnt/sdcard exfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=utf8,namecase=0,errors=remount-ro 0 0
/dev/block/vold/179:17 /mnt/secure/asec exfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=utf8,namecase=0,errors=remount-ro 0 0
tmpfs /mnt/sdcard/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0
build.prop:
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRJ22
ro.build.display.id=pono-eng 1.0.3 GRJ22 eng.daveg.20141105.164641 test-keys
ro.build.version.incremental=eng.daveg.20141105.164641
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=1.0.3
ro.build.date=Wed Nov 5 16:46:58 PST 2014
ro.build.date.utc=1415234818
ro.build.type=eng
ro.build.user=daveg
ro.build.host=ubuntu
ro.build.tags=test-keys
ro.product.model=NY001
ro.product.brand=PonoMusic
ro.product.name=pono
ro.product.device=pono
ro.product.board=pono
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=unknown
ro.product.locale.language=mdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=omap3
# ro.build.product is obsolete; use ro.product.device
ro.build.product=pono
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=pono-eng 1.0.3 GRJ22 eng.daveg.20141105.164641 test-keys
ro.build.fingerprint=PonoMusic/pono/pono:1.0.3/GRJ22/eng.daveg.20141105.164641:eng/test-keys
# end build properties
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapsize=24m
ro.kernel.android.checkjni=1
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.service.adb.enable=1
persist.service.debuggable=1
init.svc.adbd=running
persist.sys.usb.config=mass_storage,adb
recovery last_log: http://pastebin.com/zqKy119L
LOGCAT: http://pastebin.com/JjD2KjTR
Last edited: