FORUMS
Remove All Ads from XDA

[GUIDE] Fixing hard bricks [Qualcomm HS-USB QDLoader 9008]

317 posts
Thanks Meter: 225
 
By meganukebmp, Senior Member on 22nd June 2016, 06:18 PM
Post Reply Email Thread
20th October 2016, 02:29 PM |#11  
Junior Member
Flag Jakarta
Thanks Meter: 3
 
More
Exclamation Please Help
This happened after I clicked the start button...
please help
Attached Thumbnails
Click image for larger version

Name:	Untitled.png
Views:	15040
Size:	25.4 KB
ID:	3909596  
 
 
5th November 2016, 06:59 PM |#12  
Member
Thanks Meter: 0
 
More
im trying to fix two LG fino with this one.

both were successful but I am still unable to boot to download mode
5th November 2016, 09:38 PM |#13  
ProudlyTM's Avatar
Senior Member
Flag Sofia
Thanks Meter: 170
 
Donate to Me
More
Quote:
Originally Posted by s4h1k0

im trying to fix two LG fino with this one.

both were successful but I am still unable to boot to download mode

If you can boot in system, you can enable developer settings, connect the phone to your pc and try "adb reboot edl"
5th November 2016, 10:12 PM |#14  
Member
Thanks Meter: 0
 
More
sorry it seems that I missed some steps.

THIS IS THE RESULT

I still cant go to downlaod mode
10th November 2016, 09:17 PM |#15  
Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by s4h1k0

sorry it seems that I missed some steps.

THIS IS THE RESULT


I still cant go to downlaod mode

I think you need to restore the files using restore boot img, check this guide http://forum.xda-developers.com/spri...guide-t3132359
11th November 2016, 09:47 AM |#16  
Junior Member
Thanks Meter: 0
 
More
Hi My phones Lg G Pad 10.1 LG-VK700 hard brick after me flashing rom wrong Can u help me How to fix it ? Thank for help
lamyean122gmail.com
12th November 2016, 09:28 AM |#17  
Member
Thanks Meter: 3
 
More
Quote:
Originally Posted by dibowz

This happened after I clicked the start button...
please help

I'm having the same problem as yours, does anyone have a solution? thanks, need help
13th December 2016, 09:01 PM |#18  
Junior Member
Thanks Meter: 0
 
More
Is this compatible with lg l fino d290n? And if yes, why the TOT file to download has the name "LGD295V10eCIS.7z"?

Sorry for my English
17th January 2017, 06:25 PM |#19  
Junior Member
Thanks Meter: 1
 
More
Hello, this method and post files can be used for a LG L70 MS323 v10c Metro PCS, sorry for my English...
29th January 2017, 11:29 PM |#20  
Member
Flag Lima
Thanks Meter: 4
 
More
Can i use provided D295N .tot file on a D290G?
1st March 2017, 12:19 PM |#21  
Junior Member
Thanks Meter: 0
 
More
I followed the instructions but while I was about to finish, a pop-up appeared saying "partition.txt does not exist. Please extract the file from the total binary image". What am I supposed to do about this?

---------- Post added at 01:19 PM ---------- Previous post was at 01:06 PM ----------

Quote:
Originally Posted by meganukebmp

Fixing dead L70+ devices


EVERYTHING IN THIS GUIDE IS DANGEROUS AND CAN COMPLETELY DESTROY YOUR DEVICE IF DONE INCORRECTLY. YOU HAVE BEEN WARNED
PLEASE READ EVERYTHING

DO NOT DO THIS IF IT'S ONLY A SOFT BRICK!!!




What is a dead (hard bricked) device?



How do I know if my device is hard bricked?

It would fail to boot and enter recovery/download mode. When connected to a PC and powered on Windows will detect it as Qualcomm HS-USB QDLoader 9008.

Instructions
  1. Download and install drivers from here
  2. Download BoardDiag v2.99a from here
  3. Download TOT files from here
  4. Unpack all archives in a new folder in the root of your C: drive. Everything including the tot file.
  5. Remove the batter from the device
  6. Plug the device in to the PC via the USB cable.
  7. Place battery back
  8. Open BoardDiag and set it up as such:

  9. Click on the EXTRACT button and wait until it finishes.
  10. Make sure there are ticks on AP Check and EMMC Test !
  11. Press START and wait until the program finishes.
  12. When done it's safe to disconnect the phone from the PC.
  13. Pull the battery out and place it back in and try to enter Download mode. If successful you should be able to flash KDZ following this guide.

Translated and re-formatted. Original guide by @kossrap @ 4pda.

Happy flashing!

I followed the instructions but a pop-up appeared sayin "partition.txt does not exist. Please extract the file from the total binary image". What should I do to solve this?
Post Reply Subscribe to Thread

Tags
d290n, d295, fino, lg l fino, unbrick

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes