FORUMS

[ROM][Lineage OS 17.1][mt6763][Android 10][UMIDIGI A5 Pro][breeze][UNOFFICIAL]

117 posts
Thanks Meter: 91
 
Post Reply Email Thread
About
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.

Join my telegram channel to get latest updates
UMIDIGI A5 Pro Updates

Whats working?
  • Boots
  • RIL (Calls, SMS, Data)
  • Wi-Fi
  • Access point
  • Bluetooth
  • Video Playback
  • Audio
  • Sensors
  • Flash
  • GPS
  • Fingerprint
  • Camera
  • Offline charging.
Known Issues?
  • VoLTE does not work (and probably won’t work on any MTK device with custom ROMs any time soon) due to MTK’s proprietary extensions.
Links
Installation
  1. Be sure to be on the latest stock firmware!
  2. Wipe->Wipe Data->yes
  3. Wipe->Advanced Wipe->Wipe System,Cache
  4. Reboot Recovery
  5. Install Zip->SD Card->Lineage-OS-breeze-Unofficial.zip
  6. Install Zip->SD Card->NikGapps-basic-arm64-10-signed.zip or open_gapps-arm64-10.0-pico.zip
  7. Install Zip->SD Card->Magisk.zip
XDAevDB Information
Lineage OS, ROM for the UMIDIGI A5 Pro/breeze

Contributors
Hadenix

ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: Lineage OS

Version Information
Status: stable
Attached Thumbnails
Click image for larger version

Name:	photo_2020-01-22_03-10-34.jpg
Views:	580
Size:	41.8 KB
ID:	4935281   Click image for larger version

Name:	photo_2020-01-22_03-10-35.jpg
Views:	578
Size:	52.9 KB
ID:	4935283   Click image for larger version

Name:	photo_2020-01-22_03-07-21.jpg
Views:	578
Size:	55.1 KB
ID:	4935285  
The Following 3 Users Say Thank You to Hadenix For This Useful Post: [ View ] Gift Hadenix Ad-Free
6th February 2020, 11:35 AM |#2  
Hadenix's Avatar
OP Senior Member
Flag Minsk
Thanks Meter: 91
 
Donate to Me
More
06.02.2020
NOTE: NEED A CLEAN INSTALL
  • Adaptation of the status of the bar to the cutout;
  • Added camera from f2 modified by me, translation into Russian. Wide-angle module works;
  • New fix for network and incoming calls;
  • Call recording
  • Source code update;
The Following User Says Thank You to Hadenix For This Useful Post: [ View ] Gift Hadenix Ad-Free
24th February 2020, 11:34 AM |#3  
old_wolf24's Avatar
Junior Member
Thanks Meter: 0
 
More
Thanks for the very good instructions.
Easy installation exactly as specified. Setup with transfer of data from the gmail address from the cloud was also easy. So far - all good.
Unfortunately after the first reboot or power down and restart I get a loop with the start screen. The TWRP recovery boots again after about 5-6 minutes.
I need help.
PS: Original software was UMIDIGI_A5_Pro.E_V1.6_20200102. I installed the TWRP_3.3.1_20191020_Hadenix-Breeze_E.img.
Tried to take the latest TWRP_3.3.1_20200219_Hadenix-breeze.img, but it doesn't have 4GB RAM / 32 GB ROM, but 4 GB RAM / 8 GB ROM, so back to the old one.
11th April 2020, 09:31 PM |#4  
Hadenix's Avatar
OP Senior Member
Flag Minsk
Thanks Meter: 91
 
Donate to Me
More
11.04.2020
NOTE: NEED A CLEAN INSTALL
- Update FCamera (updated translation, updated IKO mode: instead of information in Chinese, Russian from Yasha)
- Changed the device name from "breeze" to "A5_Pro" as on the drain now
- Update battery capacity
- Fixed ignoring: framework-res__auto_generated_rro.apk
- Removed DummyOverlay
- Configuration included: PRODUCT_DEXPREOPT_SPEED_APPS
- Updated GMS: Android-Umidigi
- Build libraries from Mediatek (it is better to use the MTK IMS extension instead of the ril-lib fix)
- fixed animation
- Coral Fingerprint Update
- Off charging fixed
- Updated sources, with the April patch
- Advanced network type
The Following User Says Thank You to Hadenix For This Useful Post: [ View ] Gift Hadenix Ad-Free
16th April 2020, 08:16 PM |#5  
Hadenix's Avatar
OP Senior Member
Flag Minsk
Thanks Meter: 91
 
Donate to Me
More
16.04.2020
NOTE: NEED A CLEAN INSTALL
* Update source
* New Snap Camera
* Adding “SafailNet”
* Switch to Pixel 4 XL (flame) fingerprint (device certification in the market passes)
* Setting the correct RIL path (for Vendor)
* assembly libRSDriver_mtk
* Add IMS debug details bypassing CarrierConfig restrictions
* IMS: separate ims-ext-common from boot flasks
* New CameraGo instead of Fcamera (can be installed separately)
* overlay: enable a tactile text cursor.
* Build the system version of liveisplay from mtk
* Adding memory optimization
28th July 2020, 01:36 PM |#6  
Spillunke's Avatar
Senior Member
Flag Berlin
Thanks Meter: 169
 
More
Why its checking two times the same?
Code:
getprop("ro.product.device") == "A5_Pro" || getprop("ro.build.product") == "A5_Pro"
Shouldnt it be?:
Code:
getprop("ro.product.device") == "A5_Pro" || getprop("ro.build.product") == "A5_Pro_E"
28th July 2020, 03:41 PM |#7  
Junior Member
Thanks Meter: 0
 
More
Can you make it work with the EU version of the smartphone?

When installing, you get this error message:
"This package is for device A5_Pro this devices is A5_Pro_E"
Post Reply Subscribe to Thread

Tags
a5 pro, nontreble, rom, umi, umidigi, umidigi-a5-pro

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes