Today i Kuber Sharma will tell you how to Root your Coolpad Note 3 Lite.
In this Tutorial i will tell how to Root:-
1 CoolUI 6.0 - Lollipop
2. CoolUI 8.0 - Marshmallow
Rooting CoolUI 6.0 Lollipop
Note :- Good Net connection required.
2.Click on Root
3.Wait for it to Complete
4.Done , You are rooted.
5.Now Download Flashify app and download TWRP
6.Open Flashify App and install Recovery
7.Reboot To TWRP
8.Reboot to System
9.Done , TWRP also Installed
Rooting CoolUI 8.0 Marshmallow
Super SU System less zip
TWRP for CN3L
INSTALL SP Flash tool Drivers and MTK Drivers - Now Reboot.
Create a new folder name it TWRP and paste "recovery.img" and "MT6753_Android_scatter.txt" files into thisl folder.
Now right click on "flash_tool.exe" and run as administrater,after flashtool start,click on "scatter loading" and select "MT6753_Android_scatter.txt" .
Click on "download"(on left top side with green colour icon in spflash tool).
Now switch off phone and connect to Pc via USB cable
If everything fine then you will see a pop up with green tick.
Disconnect phone from PC.
Press Volume up and Power button till recovery comes on the screen(This is important step,don't boot into normal mode,after flashing recovery you have to direclty go to recovery mode by pressing Volume up + Power button similtaneously).
If you get Unmodified System Partition warning then swipe right to allow modifications.
Select SuperSU-v2.78.zip ( System less Super SU )
Swipe right to confirm flash
Reboot the device.
Note:- if you found no superSU app on reboot,then reboot to recovery and flash superSU again.
Done , Your Device is Rooted.
Steps for driver installation in windows 8,8.1 and 10 users:
**Click the Start Start menu and select Settings.
**Click Update and Security.
**Click on Recovery.
**Click Restart now under Advanced Startup.
**Click Advanced options.
**Click Startup Settings.
**Click on Restart.
**On the Startup Settings screen press 7 or F7 to disable driver signature enforcement.
Your computer will restart and you will be able to install non-digitally signed drivers. If you restart your computer again the driver signature enforcement will be re-enabled.so don't restart again before successful installation of both drivers
Subscribe to my channel for more Videos on COOLPAD Note 3/Lite:-
I AM GETTING AN ERROR WHILE DOING THE ABOVE METHOD
I AM SENDING U LINK OF SCREENSHOT OF THE ERROR
PLZ DO REPLY TO ME
|Thread Tools||Search this Thread|