Root not necessary*
No need to: ro.secure = 0 /off
REQUIREMENTS LISTED BELOW:
*Enable Developer Options [Turn On*]
*OEM Unlock [Optional*]
*Enable USB Debugging [Turn On*]
*Download C.M Flare S7 Recovery [Complete Set*]: https://drive.google.com/open?id=1Sz..._17b9P5J1la4-C
Option 1: [Through SP FLASH]
Step1: Open SP FLASH Flash_tool.exe make sure to run as Administration.
Step2: On Scatter loading file, Choose MT6739_Android Scatter.txt file.
Step3: Select Download Only.
Step4: Uncheck all and Check the recovery only
Step5: Locate and Choose custom recovery.img file
Step6: After selecting the recovery.img file, press the DOWNLOAD button
Step7: Power off your phone and then remove the battery
Step8: Connect the phone USB cable and wait for 30 seconds
Step9: if the flashing has been successful, disconnect the cable then Press VOLUME UP + POWER Button.
Option 2: [Through ADB]
Step1: You should Enable USB Debugging mode before using adb
(Located in "Settings", "System", and tap 'About Phone' 7 times)
Go back to System Settings
Turn on: DEVELOPER OPTIONS.
Turn on: OEM UNLOCK & USB DEBUGGING.
Step 2: On your Computer, install "ADB-Setup-1.4.3" then after this software has been installed
Before you can use ADB you should Unlock the BOOTLOADER before flashing (this will wipe or reset the phone)
*make sure that the "OEM UNLOCK" is turned on*
On you computer open 'CMD' command.
Unlocking the OEM BOOTLOADER to enable the Flash feature on Fastboot*
you can use VOLUME UP + POWER BUTTON to go to Fastboot by selecting BootLoader Or ADB.
Option 1: using adb
(Phone id will pop up in cmd with the list of 'DEVICES' attached)
adb reboot bootloader
(*in Fastboot type*)
fastboot oem unlock
(*Message will pop-up on your phone then Press VOLUME UP*)
(*To enable Flashing Custom Recovery Type command *)
fastboot flashing unlock_critical
(*Again Press VOLUME UP to enable*)
fastboot flashing get_unlock_ability
(*Queries bootloader to see if the device is unlocked*)
after unlocking the fastboot and oem bootloader
you can now Flash the Custom Recovery [CWM/Philz Touch 6]
in C.M FLARE S7 Folder Locate the CWM-Philz Touch 6 Custom Recovery
and copy the recovery.img file then
fastboot flash recovery recovery.img
(after flashing succeeded*)
(it will automatically reboot your phone)
*[End of tutorial]*