FORUMS
Remove All Ads from XDA

|GUIDE| - HOMTOM HT6 - TWRP | ROOT | ROMs | MODs | DRIVERs | etc...

768 posts
Thanks Meter: 376
 
By Ax1qwer, Senior Member on 18th January 2016, 07:45 PM
Post Reply Email Thread
HOMTOM HT6 - 6250 Mah Battery - MT6735P 1,0 Ghz - 2 GB RAM - LTE - HotKnot -5,5" HD - Fastcharging


HT6
STOCK Firmware:
http://www.needrom.com/download/homtom-t6/
Latest ROM is R17 - 20160513. You can update through OTA too.
Download: R17: https://yadi.sk/d/4AOdC_9hv3ttR

Do not OTA update if you have ROOT. - You will be in BOOTLOOP

It seems we can use ROM from DOOGEE T6 on HOMTOM HT6 too - BUT PRELOADER MUST BE UNCHECKED IN SPFlashTool
Link here: R05https://yadi.sk/d/fI3Q3DFTmphbW
R06 https://yadi.sk/d/jEYTpiNpndYT4

Custom Recovery:
TWRP 2.8.7.0 https://mega.nz/#!mhpmnIBR!3lqqnuBxC...Yhtl4hbGfmawBE
TWRP 3.0 https://mega.nz/#!Ho5DCR5D!mMachkzvD...9emsU8wy_ZbxFM
TWRP 3.0.2 https://mega.nz/#!P8JS0JjA!2xvaHwOKM...UsimwjCNTLnA9o
CWM https://mega.nz/#!75B2HaLL!5SREt62m0...bSZ_aeamvUTvB4

Thanks jemmini , Hanuma50 and kalipso888- 4PDA.ru
BEFORE FLASHING TWRP RECOVERY. MAKE SURE, YOU HAVE ENABLED "UNLOCK OEM" - UNLOCK BOOTLOADER - IN DEVELOPER OPTIONS.

Drivers:
I am using this drivers without problem
Please download all these drivers:
Handset WinDriver v1.00.00.31 (Drivers for ADB, MTP, USB Mass Storages, etc)
DriverAutoInstaller v1.1236.00 (Drivers for MediaTek USB VCOM)
MediaTek USB VCOM Driver v1.1123.00 (MTK VCOM driver for Win 8.1 x64)
If you have Win8/8.1/10 - you must install DriverAutoInstaller_v1.1236.00 manually. Go to:
xxxx\DriverAutoInstaller_v1.1236.00\SmartPhoneDriv er\x64 or X86\Infs and select usbvcom.inf and usbvcom_brom.inf > right click and select install. Some messages will appear > close it with click on OK button.
Now you must go same way with Unsigned infs folder. Go to : xxx:\DriverAutoInstaller_v1.1236.00\SmartPhoneDriv er\x64\Unsigned infs and select all .inf files > right click and select install. Some messages - unsigned driver will appear, just ignore it and close it with ok button.
You should not have any problem with drivers from first and third link.
Now you have all important drivers installed.

Thanks [email protected] for drivers.

Flashtool:
https://mega.nz/#!O05Q2ZSL!mOVtYCDD2...H7EDeg-sUMK6Q8

ROOT:
BEFORE ROOTING - MAKE SURE, YOU HAVE ENABLED "UNLOCK OEM" - UNLOCK BOOTLOADER - IN DEVELOPER OPTIONS.

For ROOT your device please download this ZIP and flash it in TWRP recovery.
https://download.chainfire.eu/696/SuperSU/

You can ROOT your HT6 in stock recovery too. - download this zip and flash it in stock recovery:
https://mega.nz/#!nppWFBxA!fqYIakLzp...UwMRNIKTiQ2mIQ

Patches and Fixes for HomTom HT6:

HT6/T6 Power fix:
This patch is for fix battery percentage drops - flash in TWRP + wipe cache, dalvik
this patch will take effect after cca 3 full charges.

download: https://mega.nz/#!X0QyhYJS!8EWhkit69...-jVkiAoouJixlQ

Thanks: Mardaly - 4PDA.ru
source: http://4pda.ru/forum/index.php?s=&sh...ost&p=50595464


Xposed Framework:
1) you must have TWRP recovery installed and you must have ROOT

download xposed here:
.apk : http://forum.xda-developers.com/atta...6&d=1435601440
flashable .zip: in attachments

First install the apk, than flash the zip using twrp.

WARNING: First boot after install xposed will be very long - phone will be very long on android is upgrading screen and you will get a lot of reboot - 15, maybe more reboots. Dont worry, it is normal, after it xposed will work ok. Tested on my phone and all is ok.

screen - working xposed on ht6 - http://uploads.tapatalk-cdn.com/2016...f71098f6df.jpg

For Xposed thanks to: Ryder55 @xda

If you like my work, please hit Thanks button.
Attached Files
File Type: zip xposed-v79-sdk22-arm.zip - [Click for QR Code] (3.38 MB, 1050 views)
The Following 26 Users Say Thank You to Ax1qwer For This Useful Post: [ View ] Gift Ax1qwer Ad-Free
 
 
18th January 2016, 07:46 PM |#2  
Ax1qwer's Avatar
OP Senior Member
Thanks Meter: 376
 
Donate to Me
More
HOMTOM HT6 - How to install TWRP recovery and ROOT this device.

Option 1 - Flashing TWRP and flashing supersu.zip

*NOTE: If you have ROOT, you can flash TWRP recovery via app Flashify - DL on google play.

1) download and install all drivers
2) download twrp recovery for HT6 and extract it somewhere.
3) download Flashtool
4) download supersu.zip and copy it in your sdcard.
5) turn phone off and prepare usb cable
6) open flashtool - http://postimg.org/image/929l19yjh/full/
7) select scatter file from extracted archive with twrp recovery for HT6 - http://postimg.org/image/6idy76azh/
8) make sure recovery is checked, select download only and click on download - http://postimg.org/image/siuanstnh/
9) now connect your phone via usb cable.
10) when flash is completed - green icon will appear - close it.
11) now you can unplug your phone and boot into TWRP
12) hold volume + and power in same time.
13) menu should appear, you can select recovery, bootloader, etc...
14) you can move in menu by pressing volume up. Volume down is confirm button.
15) select recovery
16) now you should be in twrp recovery.
17) select install, select supersu v2.46.zip and confirm flash.
18) now you have TWRP installed and ROOTED your HT6. You can go back, select reboot > system.

DONE.

Option 2 - flashing root via update.zip in stock recovery
1) download root update.zip and copy it on your sdcard after it go to settings> developer options > unlock oem and enable it.
2) turn off your phone
3) hold volume + and power in same time
4) in menu select recovery - move in menu by pressing volume + and confirm button in volume down button.
5) now you are in android recovery - now you must get acces in recovery menu.
6) hold power button and hit volume up button - menu should appear
7) select apply update from sdcard
8) select update.zip - in menu you can move via volume buttons - power is confirm button
9) confirm flash.
10) go back . . / and select reboot system now
11) now you have rooted your HT6 via stock recovery.

Option 3 - flashing root via update.zip -easiest way
1) download root update.zip from first post.
2) go to settings> developer options > unlock oem and enable it, after it go to settings>about phone > wirelles update
3) in right corner select ... (three dots) > select local updates and select update.zip
4) confirm update - phone reboots and install update automatically
5) You have ROOT
The Following 9 Users Say Thank You to Ax1qwer For This Useful Post: [ View ] Gift Ax1qwer Ad-Free
18th January 2016, 07:46 PM |#3  
Ax1qwer's Avatar
OP Senior Member
Thanks Meter: 376
 
Donate to Me
More
Custom ROMs


Leagoo Elite 5 For HomTom HT6
Download ROM: https://drive.google.com/file/d/0B_W...zBVdmE2dHFKOTA
Thanks: Keksik1980 - 4PDA for port.
bugs: -

YunOS 3.0.5 for HomTom HT6
Download ROM: https://yadi.sk/d/RAP0lnrytzcUX
Download camera fix: https://yadi.sk/d/ltn1w4vetzYN7
Thanks: Keksik1980 - 4PDA for port.
bugs: -
Languages: EN/RU

Resurrection Remix 5.5.9 for HomTom HT6
DL: https://yadi.sk/d/uzOOqngfu4YYY
Thanks: Keksik1980 - 4PDA for port.
bugs: ?

AOSP for HomTom HT6
DL:https://yadi.sk/d/TzRWvKedtxu8p
Thanks: Keksik1980 - 4PDA for port.
bugs: ?

CyanogenMod 12.1 for HomTom HT6
DL: https://yadi.sk/d/brKZT28-sRLdU
Thanks: lexa6074465 - 4PDA for port.
bugs: - camera works only on 8MP - no focus


HOMTOM HT6 Alternative Rom v3.0 Black Edition
source:http://4pda.ru/forum/index.php?showt...#entry48056999

Download ROM:: https://yadi.sk/d/yfwbDvCXsJZo6

Patches:
-

Xposed:

flash zip: https://mega.nz/#!mxY1VLbK!jegzyjMEh...6k74FDGY7B4e58
.apk: https://mega.nz/#!Ktg0xYTA!nXHfiEem6...Umn7Q52AVO6drM

first install .apk, after it flash zip.

Thanks [email protected]

-----------------------------------------------------------

AoROM v1 - MOD ROM from Oukitel K6000 for HT6
Thanks kalipso888 - 4pda.ru

Download ROMhttps://yadi.sk/d/dw8_W5g3oqYCA
Download Patch v1 - https://mega.nz/#!uooAwZSB!ENDXswGE8...aFuSfgmwnfJAoA
Download better camera libs: https://mega.nz/#!Cx5kiaxB!cTinf0Fof...CTnLGxScdD_TQY


Thanks madarly - 4pda.ru for patch, libs and sdfix

Thanks: 4pda.ru http://4pda.ru/forum/index.php?showt...#entry47119937

some changes:
Better camera quality
Better battery life
Better network managment
Dolby Atmos
Better performance
Faster and smoothest UI
Better speaker and headphone output quality
Faster wifi connection
Better RAM managment
Updated Google Apps
Lower phone temperature
Alarm working in quet mode
Better APN settings

DingDing Heat8 ROM for HT6

link: http://forum.xda-developers.com/show...&postcount=123

HOMTOM HT6 - STOCK ROMs from DOOGEE T6 flashable in TWRP

Doogee T6-R06 DEODEX
https://yadi.sk/d/SW0I3rgFnicma

Doogee T6-R05 DEODEX_v1
https://yadi.sk/d/8Mch4uLOnjr94

Thanks to: mardaly @4pda.ru
The Following 7 Users Say Thank You to Ax1qwer For This Useful Post: [ View ] Gift Ax1qwer Ad-Free
18th January 2016, 07:47 PM |#4  
Ax1qwer's Avatar
OP Senior Member
Thanks Meter: 376
 
Donate to Me
More
Unbrick Tutorial / Back to STOCK ROM

Here is unbrick/update tutorial for those who are in bootloop, or for those, who want to update or restore phone to stock ROM with SPFlashTool method.

*NOTE: READ!!!! All your files will be deleted. Please backup your internal storage.
This process will not format your SDcard.


*NOTE2: If you dont want to lose your phone data, you must uncheck userdata field in flashtool. - Step 4E
- This step is experimentall and it can cause problems and bad system stability. Please do not use this step if you are comming back to stock/official rom from custom rom.
- This step is possible to use, if you are restoring your phone from bootloop after OTA update on rooted phone.

---------------UNBRICK GUIDE-----------------
1) Download all important files:
A) Download all Drivers from first post and install it. - If you have win8/8.1/10 use my tutorial how to install it - in first post too. - here
B) Download latest STOCK ROM from here and extract it : http://www.needrom.com/download/homtom-t6/ (latest version is R17 - 20160513, maybe Homtom will release new updates, just download latest version - R17 here: https://yadi.sk/d/4AOdC_9hv3ttR)
C) Download flashtool from here and extract it: https://mega.nz/#!O05Q2ZSL!mOVtYCDD2...H7EDeg-sUMK6Q8

2)Power off your phone - if you are in bootloop just hold power button until phone power off.
3) Prepare original Homtom USB(charging) cable - Do NOT connect your phone in PC - I will tell you when you must connect your phone.
4) Follow this pictures:
A) In PC open Spflashtool folder and open Flashtool as administrator - http://s22.postimg.org/5na2xf4ip/ht6unbrick1.png
B) Press ok button - http://s22.postimg.org/ti7v9izkx/ht6unbrick2.png
C) Select scatter loading button - http://s22.postimg.org/ttpbmag0x/ht6unbrick3.png
D) Navigate to extracted STOCK ROM folder and sellect android scatter file - http://s22.postimg.org/y1k3v1hgh/ht6unbrick4.png
E) Make sure - all things like system,recovery,userdata,preloader,tee1,tee2,etc are checked, select download only and select Download button with green arrow. - http://s22.postimg.org/r261vohi9/ht6unbrick5.png
F) Make sure your phone is still powered OFF. Now you must connect phone to PC with Original USB cable
G) flashing proces should start - http://s22.postimg.org/ixxxqxv35/ht6unbrick6.png on the bottom of flashtool you can see yellow bar with percentage.
H) When process is finished - green symbol will appear - http://s22.postimg.org/8p5gl471d/ht6unbrick7.png
I) Now you can close this window, unplug your phone and close flashtool application.
J) You can power on your phone. First boot is little bit longer than normal boot, so just wait until android will boot completely.
K) Enjoy
The Following 10 Users Say Thank You to Ax1qwer For This Useful Post: [ View ] Gift Ax1qwer Ad-Free
18th January 2016, 07:47 PM |#5  
Ax1qwer's Avatar
OP Senior Member
Thanks Meter: 376
 
Donate to Me
More
Touchscreen Fix Tutorial
By Spoooky1


I finally got success to recover my touchscreen so I submit my tutorial.

First, there is no need for some chineses softwares like 360??? (setup_10.2.0.2001a.exe or instmobilemgr.exe). The really most important is :

- a HT6 rooted
- a PC with adb drivers installed
- download HT6digitizer.zip, unzip it on the desktop (for instance)

Step 1 : power on the HT6 with a BT mouse (or a USB mouse plugged with OTG cable) and go to :
Settings -> Developer options -> enable Stay awake and USB debugging (both are very important !)


Step 2 : connect the HT6 and the PC with a USB cable
on the PC, go to HT6digitizer folder and launch a MSDOS window (in admin mode) then type adb devices inside
if your HT6 is unauthorized then take a look at your HT6 and go next step, else go to step 5

Step 3 : the most difficult without a BT mouse !
This popup should appear and you have to select "Always allow from this computer" and click OK


Step 4 : If the previous job is well done, type again adb devices and now your HT6 is authorised (else disconnect the HT6 and go back to Step 2)


Step 5 : type adb shell ls /proc/gm* in the MSDOS window and NOTE the result (very important !!)

(the result is /proc/gmnode20160312 in my case)

Step 6 : On the PC, go to HT6digitizer folder and launch GtpAdbTool_ENU.exe (in admin mode)
Fill the popup with the previous result and click on Determine button


Step 7 : then IC type and IC version should appear. Click on Browse button

Step 8 : choose the GT9157_Config_20160305_225004.cfg file and click on Open (Ouvrir in french )


Step 9 : select Send config and click on Perform operation


Step 10 : Finish ! all is green, you can use your touchscreen



Special Thanks to : kalipso888 , Ax1qwer , flasource_ , Zeggi
The Following 2 Users Say Thank You to Ax1qwer For This Useful Post: [ View ] Gift Ax1qwer Ad-Free
19th January 2016, 04:00 AM |#6  
Senior Member
Flag Kozani
Thanks Meter: 325
 
More
Hello.Does anyone know if this power bank http://www.banggood.com/Qualcomm-Cer...p-1004535.html support fast charge for homtom ht6?
or any other powerbank that supports it? Because now i have a romoss sense 4 which gives in output 5v 2.1A but ht6 charges very slow.
19th January 2016, 02:58 PM |#7  
Ax1qwer's Avatar
OP Senior Member
Thanks Meter: 376
 
Donate to Me
More
Quote:
Originally Posted by clio94

Hello.Does anyone know if this power bank http://www.banggood.com/Qualcomm-Cer...p-1004535.html support fast charge for homtom ht6?
or any other powerbank that supports it? Because now i have a romoss sense 4 which gives in output 5v 2.1A but ht6 charges very slow.

Hi, I am using Xiaomi 10400mah powerbank and charging is fast.

HT6 using Mediatek Pump Express fast charging technology and I think it is not compatible with Qualcomm Quick charge. But maybe I am wrong.
The Following User Says Thank You to Ax1qwer For This Useful Post: [ View ] Gift Ax1qwer Ad-Free
21st January 2016, 06:38 PM |#8  
Ax1qwer's Avatar
OP Senior Member
Thanks Meter: 376
 
Donate to Me
More
TWRP flashing tutorial + root guide with pictures comming soon.
The Following User Says Thank You to Ax1qwer For This Useful Post: [ View ] Gift Ax1qwer Ad-Free
23rd January 2016, 11:38 PM |#9  
Junior Member
Thanks Meter: 0
 
More
Hi! Using this smartphone I noticed that the data network connection (E, H+, 3G, 4G...) is shown REALLY LARGE in the status bar. Is there any way to make that disappear? Thanks!
24th January 2016, 10:25 AM |#10  
Ax1qwer's Avatar
OP Senior Member
Thanks Meter: 376
 
Donate to Me
More
Quote:
Originally Posted by Archah

Hi! Using this smartphone I noticed that the data network connection (E, H+, 3G, 4G...) is shown REALLY LARGE in the status bar. Is there any way to make that disappear? Thanks!

I think icon can be deleted via Xposed, but there is no working Xposed for HT6 now, we must wait for clear AOSP custom ROM, xposed should be running fine on it.

Now xposed is not working on HT6.

Edit: TWRP flashing and ROOTING tutorial added in second post
25th January 2016, 08:29 AM |#11  
Junior Member
Thanks Meter: 0
 
More
why you dont use option 2 . it is more easy ?
Post Reply Subscribe to Thread

Tags
doogee ht6, homtom ht6, ht6 rom, ht6 twrp

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes