The Official Karbonn Titanium S5 Plus Thread :
Note : This is for the Karbonn Titanium S5 Plus / Coolpad 7295C Device and Development related to it and its clones only.Quote:
Original Karbonn ROM :
Stock ROM in a flashable Zip format :
Here are the Custom Recoveries for this device :
Preferred, Tested : Philz Touch Recovery 6.57.9 ( based on ClockWorkMod Recovery v184.108.40.206 )
TWRP Recovery 220.127.116.11 ( Touch )
ClockWorkMod recovery for Karbonn Titanium S5 Plus : ( Non - Touch )
ClockWorkMod - based recovery for Karbonn Titanium S5 Plus ( Modded by carliv @ xda )
Next, Here are the Custom ROMsQuote:
Sony Xperia Z:
Note : The above mentioned link doesn't appear to work. If anybody finds this file link working, please add a post here and if possible, upload the file to Google Drive and Post the link here.Quote:
Sony Xperia Z v2:
Credits : Ajinkya Mishra
Miui v5 :
( to download this, you need to log in to needrom.com first )Quote:
Samsung Galaxy Note 3-themed ROM :
Stock Flashable ROM :
Android Lollipop-themed ROM :
Samsung Galaxy S5-themed ROM :
Note : The above posted links for ROMs are not tried and tested ! Be Careful !
For some of the ROM downloads, you need to log into the respective sites...
Thanks mainly to the thunderboys team and all other developers of the respective ROMs whom I haven't mentioned.Quote:
SystemUI.apk and SystemUI.odex files:
Steps for flashing a .img file to a specific partition ( here, recovery ) :
Here are the two methods :
From here, you can reboot to recovery and back again without any issues. This is the tried and tested method, the method which worked perfectly when I tried it on my device. Else, if you have no patience for connecting the Phone to the PC, jabbing on the keyboard and entering n number of commands, you could try this out :Quote:
1st Method ( Using ADB ) -- This needs the phone to be connected to the computer.
Go to the folder containing the recovery.img file you just downloaded.
Shift + Right Click on any empty space in the folder and Select Open Command Window Here
Connect the phone to the computer and make sure you have USB Debugging enabled and not USB Storage
Type these into the Command Window :
adb devices -- This should show the Device attached as KarbonnTitaniumS5Plus-xxxx or any such line.
adb get-state -- This is to ensure USB Debugging works. It will show device, recovery or offline, but here, we would be looking for device
adb reboot bootloader -- This reboots the device into Fastboot mode, also called as HBOOT or Bootloader. This mode is necessary for flashing the recovery.img file
fastboot oem unlock -- This is to ensure that you can flash xxxx.img files to specific partitions of the device.
fastboot flash <<partitionname>> <<nameofrecoveryimagefile.img>> -- This flashes the specific partition image file to the specified partition. Here, we would be looking for something like fastboot flash recovery philzrecoverys5plus.img for the PhilZ Touch Recovery and fastboot flash recovery twrprecovery.img for the TWRP Recovery and fastboot flash recovery cwmrecoverys5plus.img for the.... Well, you understand what I mean. This should show some text on the device like Transferring Flash or Writing Flash and the Time and Speed of it, that would confirm your flashing.
fastboot reboot -- This command reboots the device into the normal system, and lo, you're ready to go !
2nd Method ( Using Terminal Emulator ) -- This doesn't need the phone to be connected to the computer.
Place the recovery.img file in the Internal Storage or External SD Card -- Here, I'm placing it as in storage/sdcard0/xxxxrecovery.img
Install Terminal Emulator or any such app onto the phone and Open it.
Type these commands one by one :
su -- This gives root permissions to the Command Executor.
flash_image recovery /storage/sdcard0/xxxxrecovery.img -- This flashes the recovery image file to the recovery partition.
Close the Terminal Window.
Another Note : If you're following the Second ( Terminal Emulator ) Method, note that there is a space between flash_image and recovery and the path of the image file. The first method is the preferred one, which worked perfectly with no errors for me; while the second method is risky and might return some errors while trying it out.Quote:
LoooooongShortened Note : The TWRP Recovery might, in some rare cases, show your battery level as 19% when it is at 99% and the same goes for the others. If you are encountering this error damn frequently, I'd recommend reverting back to the original CWM basic recovery as it doesn't show any battery info at all ! You also have the option of wiping your Battery Statistics in case the Battery Error in the Touch Recoveries made the system too show the same error. Once, after fully charging the phone to 100% and rebooting to recovery, I found that the TWRP recovery showed the battery level at 19% ! Out of curiosity, I rebooted back to the system and it too, showed it at 19% ! I just plugged it into the charger and was like Whoa !, as the battery sprang from 19% to 24% in 7 seconds flat ! I know that neither the reboot to recovery does drain out that much battery, nor does the recovery randomly perform such miracles on it. So, I just flashed CWM basic recovery to it using fastboot mode, opened it, did a Battery Stats wipe and rebooted to the System. It was back to 99% ! So, a full Battery Statistics wipe helped me solve such errors, and might do the same to you too.Just remove the battery from the phone after you power off from the recovery, put it back in, and let the phone start up. Problem Solved ! Damn, why didn't I think of this earlier ?Quote:
Yet Another Short-But-Not-So-Short Note : I'd recommend disabling the Boot Animation on the phone ( using ROM Toolbox Lite or Pro ) so that the possibility of bootloops is diminished. No Boot Animation = Less Chance of Bootloops !Quote:
One Last Note : ( Yeah, Right. )
The MIUI ROM and the Sony Xperia v2 ROM work properly. For people who have boot issues, doing a full data wipe/factory reset through the recovery will solve that problem... MIUI is pre rooted, but chainfire's SuperSU app is not installed and there is no keyboard app. The Sony Xperia v2 ROM has SuperSU installed and works properly. However, a high amount of patience is needed to wait for the ROMs to boot up...
As mentioned by cybercrawler, the internal/external swap supposedly works, and appears to be already applied in these ROMs... so, if you are going to flash a new ROM, you had better undo this change...
The clockworkmod recovery file works too, as seen in the screenshots uploaded by cybercrawler... thanks to him for testing that out.
I shall be uploading some screenshots of these in a few days. Both the ROMs run Android Jelly Bean 4.2.2, and the MIUI ROM has a update scheduler app, so I'm guessing it can be updated to 4.4 Kitkat. Anyway... if anybody knows how to bypass Dropbox Error 509 ( This account's public links are generating too much traffic and are temporarily disabled ), please download the Xperia Z v1 ROM and upload it to Google Drive...
Check this thread for further development on this device.
If anybody is willing to volunteer to try a ROM still in development for this device, you can download it here :
It is NOT READY FOR FLASHING, but is a Kitkat ROM, so anybody willing to put in their efforts in the development of this ROM can help.