Tutorial - How to root doogee F7 :) ( TWRP )

Search This thread

ADBdeveloper

New member
Dec 30, 2017
3
2
:)
*****Warning!*****​
if you brick your phone, im not responsibility!

What you need and important.
This tutorial is only for DOOGEE F7, NO PRO!
When you are TWRP , DO NOT DISCONNECT DEVICE FROM PC.
To start you need these files:
- 15 SECOND ADB INSTALLER ( Downloads below )
- Doogee F7 and USB type C cable. ( buy cable here. gg.gg/7m0dx )
- TWRP.img for Doogee F7 ( Thanks for cleopatra. ) ( Downloads below )
- SuperSU zip. ( Downloads below )


TUTORIAL

Step 1.
Installing ADB.
Run 15 second ADB installer. Then it ask installing ADB and fastboot ,
Input Y . Now it ask ADB system wide.
Input again Y. Last it ask install driver. Input Y


Step 2.
Enabling USB debugging.
Go to settings, system information and tap build number 7 times.
Now you have appeared Developer options.
Go to Developer options and find USB debugging.


Step 3.
Preparing to root..
Now extract your DoogeeF7_TWRP.zip and move recovery.img
to C:\ADB\ or the path where your ADB is installed.
After that move SuperSU.zip to SD-card!
Note: When you unlock bootloader it reset your phone, so use SD-card.


Step 4.
Unlocking bootloader.
Now we have to unlock bootloader to root.
Run command prompt and type: adb devices
In your phone you got popup. It ask for allow USB debugging. Choose YES.
Do ADB DEVICES again. It should find your phone.
Now type: adb reboot bootloader
Wait 10-15 seconds and type: fastboot oem unlock
Now in your phone press volume up.
Then wait 10 sec and reboot your phone.
Your phone is resetted.


Step 5.
Rooting.
When your phone booted, enable USB debbugging ( follow step 2. )
It again ask for allow USB debugging, Grant access.
Now type in command prompt: adb reboot bootloader ( if want check it see ur device type: adb devices )
Wait again 10-15 second. Now type fastboot boot c:\adb\recovery.img.
Now youre in TeamWin recovery.
Now flash the SuperSU.zip..
Then reboot device.
If you see SuperSU installed, all success.
Congrats!



DOWNLOADS:
Copy link, i cannot put links because im junior member. :(
15 seconds ADB installer. ( goo.gl/PCxecL )
TWRP recovery for doogee. ( Contain stock too ) ( gg.gg/dgztwrp )
SuperSU zip. ( goo.gl/f81Q9W )

Im happy, if this helped. :)

If you have any questions ask!:D
 
Last edited:
  • Like
Reactions: akre74 and caobe

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    :)
    *****Warning!*****​
    if you brick your phone, im not responsibility!

    What you need and important.
    This tutorial is only for DOOGEE F7, NO PRO!
    When you are TWRP , DO NOT DISCONNECT DEVICE FROM PC.
    To start you need these files:
    - 15 SECOND ADB INSTALLER ( Downloads below )
    - Doogee F7 and USB type C cable. ( buy cable here. gg.gg/7m0dx )
    - TWRP.img for Doogee F7 ( Thanks for cleopatra. ) ( Downloads below )
    - SuperSU zip. ( Downloads below )


    TUTORIAL

    Step 1.
    Installing ADB.
    Run 15 second ADB installer. Then it ask installing ADB and fastboot ,
    Input Y . Now it ask ADB system wide.
    Input again Y. Last it ask install driver. Input Y


    Step 2.
    Enabling USB debugging.
    Go to settings, system information and tap build number 7 times.
    Now you have appeared Developer options.
    Go to Developer options and find USB debugging.


    Step 3.
    Preparing to root..
    Now extract your DoogeeF7_TWRP.zip and move recovery.img
    to C:\ADB\ or the path where your ADB is installed.
    After that move SuperSU.zip to SD-card!
    Note: When you unlock bootloader it reset your phone, so use SD-card.


    Step 4.
    Unlocking bootloader.
    Now we have to unlock bootloader to root.
    Run command prompt and type: adb devices
    In your phone you got popup. It ask for allow USB debugging. Choose YES.
    Do ADB DEVICES again. It should find your phone.
    Now type: adb reboot bootloader
    Wait 10-15 seconds and type: fastboot oem unlock
    Now in your phone press volume up.
    Then wait 10 sec and reboot your phone.
    Your phone is resetted.


    Step 5.
    Rooting.
    When your phone booted, enable USB debbugging ( follow step 2. )
    It again ask for allow USB debugging, Grant access.
    Now type in command prompt: adb reboot bootloader ( if want check it see ur device type: adb devices )
    Wait again 10-15 second. Now type fastboot boot c:\adb\recovery.img.
    Now youre in TeamWin recovery.
    Now flash the SuperSU.zip..
    Then reboot device.
    If you see SuperSU installed, all success.
    Congrats!



    DOWNLOADS:
    Copy link, i cannot put links because im junior member. :(
    15 seconds ADB installer. ( goo.gl/PCxecL )
    TWRP recovery for doogee. ( Contain stock too ) ( gg.gg/dgztwrp )
    SuperSU zip. ( goo.gl/f81Q9W )

    Im happy, if this helped. :)

    If you have any questions ask!:D