FORUMS

[STABLE] XIAOMI/DUOQIN QIN 1S+ resolve software installation restrictions

8 posts
Thanks Meter: 2
 
By 0xA, Junior Member on 14th August 2019, 11:01 AM
Post Reply Email Thread
Preparation:
1. A memory card
2. One computer, and the spreadtrum driver has been installed (how to determine whether the driver has been installed, in fastboot mode to see whether there are unrecognized devices in the device manager can be).
3. The phone is in debugging mode

Start work:
1. Download duoqin1splus. rar, extract the duoqin1splus. rar and copy updata.zip to the local directory for backup;
2. Connect the phone to the computer (make sure there is a memory card inside!), uncompress DuoQin1SPlusRecovery. Rar, run runme.bat;
3. The phone will automatically enter fastboot, restart and enter the Recovery mode. Press "8" to enter the main interface of Recovery (don't double clear!Do not double clear!There is no Recovery mode to resume the previous step!;
4. Select "Apply update from external storage." select "update.zip" to copy to the memory card.
5. After the brush is finished, it is forbidden to double clean; select "reboot system" directly;
6. Wait for restart to enter the interface.
If you need to reset the phone, please go into the Settings to restore the factory Settings after the phone starts up normally. I will not be responsible for the repair of the jammed screen caused by double clear. Remind yourself not to listen. It's your own business.

Issues to note:
1. This kind of thing is mostly made out of feelings (yes, mobile phone has been repaired 2 times, and this test will be repaired again).Do not use for commercialization, once found, I will pursue the responsibility of commercial pirates.
2. After starting up each time, the recovery of the mobile phone will be restored to the official recovery. If you have other needs for using the mobile phone, please follow the steps in the beginning work and start over again.
3. Once the system is modified, ota update cannot be installed, please note;
4. Swiping machine is risky, please be careful.

You can read the original at: myworldbooks.cn/archives/683
Download link: pan.baidu.com/s/1d84F1SCgpauisG-6dr1x6w
Code: 74ex
Unpackage code:
George_20190813


------------------------------------------------------------------------------------------------
20190928 update
Flash program & package
Download link: pan.baidu.com/s/19YQiV69j2IPpyi-PL21VuQ Code: 8d7g
Offical Package
Download link: pan.baidu.com/s/1dwotU5e6rsX220plCDGqPA Code: hk7i

All the information which had updated was in the source page: myworldbooks.cn/archives/683
The Following User Says Thank You to 0xA For This Useful Post: [ View ] Gift 0xA Ad-Free
14th August 2019, 11:06 AM |#2  
OP Junior Member
Thanks Meter: 2
 
More
in addition:
who can provide me fdl1 and fdl2 files of sc9820e? thanks.
16th August 2019, 08:10 PM |#3  
Junior Member
Thanks Meter: 0
 
More
can someone help to host the files onto another website? don't have access to baidu

many thanks!
18th August 2019, 12:40 PM |#5  
Junior Member
Thanks Meter: 0
 
More
thank you both! managed to install whatsapp by following the steps!

you guys are great!
4th September 2019, 03:00 PM |#6  
Junior Member
Thanks Meter: 0
 
More
I followed the steps in the guide and I am stuck at step 3. On this step
3. The phone will automatically enter fastboot, restart and enter the Recovery mode. Press "8" to enter the main interface of Recovery (don't double clear!Do not double clear!There is no Recovery mode to resume the previous step!;

My phone is entering fastboot, however there are no selection within the fastboot whatsoever. How do I restart and enter Recovery mode?
I tried holding the power button, it restarted but it entered the normal boot.
Tried to restart again and hold 8 still the same.

Can anyone help? I followed all the steps.
19th September 2019, 08:44 AM |#7  
Junior Member
Thanks Meter: 0
 
More
I can confirm it.
Following these steps the phone enters fastboot, but without automating restarting on Recovery mode.
Also on fastboot there no option for manual restart on Revovery mode.
Any help will be welcome.
29th September 2019, 12:06 PM |#8  
Senior Member
Thanks Meter: 74
 
More
Tool for Qin 1s and Qin1s +
Install Qin 1s and Qin1s + Applications
Getting root rights to 1s + version
Backup partitions on 1s + version
Quick reboot commands
Attached Thumbnails
Click image for larger version

Name:	2019-09-29_12-46-17.png
Views:	1290
Size:	37.6 KB
ID:	4830827   Click image for larger version

Name:	2019-09-29_12-51-18.png
Views:	1256
Size:	67.5 KB
ID:	4830829   Click image for larger version

Name:	IMG_20190929_131002.jpg
Views:	1402
Size:	243.5 KB
ID:	4830831   Click image for larger version

Name:	IMG_20190929_131016.jpg
Views:	1292
Size:	228.2 KB
ID:	4830833   Click image for larger version

Name:	IMG_20190929_131022.jpg
Views:	1276
Size:	245.8 KB
ID:	4830835   Click image for larger version

Name:	2019-09-30_17-05-09.png
Views:	1152
Size:	38.1 KB
ID:	4831947   Click image for larger version

Name:	2019-09-30_17-05-31.png
Views:	1112
Size:	12.8 KB
ID:	4831949   Click image for larger version

Name:	2019-09-30_17-06-25.png
Views:	992
Size:	13.9 KB
ID:	4831951   Click image for larger version

Name:	2019-09-30_17-06-46.png
Views:	856
Size:	28.9 KB
ID:	4831953   Click image for larger version

Name:	2019-09-30_17-07-15.png
Views:	862
Size:	64.5 KB
ID:	4831955  
The Following 3 Users Say Thank You to gaguga For This Useful Post: [ View ] Gift gaguga Ad-Free
15th October 2019, 12:37 PM |#9  
OP Junior Member
Thanks Meter: 2
 
More
Quote:
Originally Posted by gaguga

Tool for Qin 1s and Qin1s +
Install Qin 1s and Qin1s + Applications
Getting root rights to 1s + version
Backup partitions on 1s + version
Quick reboot commands

Thanks for your work. it's useful.
I hope you do not mind i had been sharing your programs in my blog.
thank you!
15th October 2019, 01:19 PM |#10  
OP Junior Member
Thanks Meter: 2
 
More
Quote:
Originally Posted by jcbwlsnlee

I followed the steps in the guide and I am stuck at step 3. On this step
3. The phone will automatically enter fastboot, restart and enter the Recovery mode. Press "8" to enter the main interface of Recovery (don't double clear!Do not double clear!There is no Recovery mode to resume the previous step!;

My phone is entering fastboot, however there are no selection within the fastboot whatsoever. How do I restart and enter Recovery mode?
I tried holding the power button, it restarted but it entered the normal boot.
Tried to restart again and hold 8 still the same.

Can anyone help? I followed all the steps.

So sorry reply you too late. Your could press the power button when your phone hold on the fastboot mode. If you can't enter in the recovery mode, may be your adb.exe is using or derive of fastboot has some problems. Please check and fix them.
The source page in Chinese and the origin flash programs was updated. it may solve your problems.
15th October 2019, 01:22 PM |#11  
OP Junior Member
Thanks Meter: 2
 
More
Quote:
Originally Posted by NickTheGreek

I can confirm it.
Following these steps the phone enters fastboot, but without automating restarting on Recovery mode.
Also on fastboot there no option for manual restart on Revovery mode.
Any help will be welcome.

Please check off your drives when your phone is under the fastboot mode, and ensure the adb.exe is not in using.
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes