Should I tempt or do you forsee the loops of boot? Lol
Sent from my LG-H901 using XDA-Developers mobile app
Should I tempt or do you forsee the loops of boot? Lol
Inside of the v4a apk, it is stated in your quote! But you may go a few pages back too, I think he provided a downloadWhere do I find x86 driver for v4a I'm running arm but would love to test and see
I got error flashing in twrp as well, but when I rebooted viper and DTS and dolby info.txt was in /system like it worked............. I am confused.....
Sorry Professor, I wouldn't be misleading about the V4A driver manipulation. Maybe rushed a bit about the loudness. But again how to check the driver change as there's no change to driver status information. Much thanks for the reminder about the precious cochlea.
My bad, it must be the attempt at setting /vendor/bin permissions.
---------- Post added at 12:53 PM ---------- Previous post was at 12:49 PM ----------
How much free /system space shows to be currently available?
If system only is without FC's than it is fine. The user-app install was only meant as a fix for the FCIs DTS to be installed as both system and user app still? Or just system, mine only showing as system app, not user.
Where do I find x86 driver for v4a I'm running arm but would love to test and see
The last version was stated that was experimenting with installing DTS to system and user app with zip flash, so I wanted make sure in this version was not supposed to install to both, but I don't have FC as just systemIf system only is without FC's than it is fine. The user-app install was only meant as a fix for the FC
My bad, it must be the attempt at setting /vendor/bin permissions.
---------- Post added at 12:53 PM ---------- Previous post was at 12:49 PM ----------
How much free /system space shows to be currently available?
Guys, allow me to go slightly out of topic. Paranoid Android ROM is back. Did anybody try Exodus on it?
Is DTS to be installed as both system and user app still? Or just system, mine only showing as system app, not user.
Sent from my Nexus 6P using XDA Labs
Mine is not, if I install the update will it do that?
I am having this issue since last few updates .
guitardedhero unzipped Sony suite, removed Album and TrackId and left only Music app with some plug-ins, re-zipped , instead of us, thanks
guitardedhero unzipped Sony suite, removed Album and TrackId and left only Music app with some plug-ins, re-zipped , instead of us, thanks
Sent from my Nexus 4 using XDA-Developers mobile app
# ARISE Sound Systems™ 20170424
#
# Magnum Opus
#
# /sdcard/arise_customize.prop
#
# www.arisesound.com
## !! This archive contains 300MB of data.
## !! Navigate to /system to ensure
## !! sufficient space is available in
## !! /system before flashing.
# Module description and information can be found in META-INF/getting_started/modules.
# The ARISE™ modular installation zip works by using this file (when present in /sdcard as /sdcard/arise_customize.prop) to determine if any modules are to be installed by a value of "true" for each line below.
# Any value other than "true" is the same as a value of "false".
# Add a value of "true" to desired add-on(s). Example:
install.xxxx=true
# The Core System module must be installed at least once and only once. Once the core module is installed, the value of "true" should be removed for future customization installing, uninstalling, or executing scripts and modules.
# If a rom update or system wipe is performed resulting in the need to reinstall the sound system, edit /sdcard/arise_customize.prop to include a value of "true" for the core module to complete your sound system installation, followed by removing the value of "true" from the core module once booted.
## START ##
install.core=
(40MB-175MB)
# Select either ViPER4Arise™ version below to be installed or ignore to not install ViPER4Arise™ at all.
install.v4a_2.5.0.5=
(4.5MB)
install.v4a_2.3.4.0=
(6.5MB)
# Add a value of "true" to any modules below to install.
install.v4a_profiles=
install.ddplus=
(15.3MB)
install.atmos=
(3.3MB)
install.am3d=
(3.5MB)
install.arkamys=
(170KB)
install.sony=
(70MB)
install.v4a_xhifi=
(700KB)
install.esira=
(3.6MB)
install.musicfx=
(200KB)
install.dirac=
(4.2MB)
delete.deep_buffer=
restore.deep_buffer=
repair.sdcard.permissions=
#
## Qualcomm™ Audio Effects Configuration START ##
# Qualcomm™ devices have the ability to select from four audio effects configurations using Android O (default), Asus, DAP (native Dolby Atmos), Huawei, Sony, or Stock /soundfx libraries.
# IMPORTANT!!
# If installing an audio effects configuration on a currently installed sound system, BE SURE TO INSTALL THE CURRENTLY INSTALLED MODULES AGAIN USING THE APPROPRIATE VALUES!!
# Installing Core is not necessary, but any other module IS NECESSARY so that those modules' entries are written to the new audio effects configuration!!
# As a reminder, any preferred or custom audio effects configuration can always be automatically installed during the Core System module installation by placing it directly in /sdcard named arise_effects.conf to result with /sdcard/arise_effects.conf.
ANDROID_O
ASUS
DAP
HUAWEI
SONY
STOCK
Example: install.qc.ef**cts=ANDROID_O
install.qc.effects=
## Qualcomm™ Audio Effects Configuration END ##
#
## ICEsound™ START ##
# Add a value of "true" to install the ICEsound™ module:
install.ICEsound=
(750KB)
# The following ICEsound™ configurations are available below. a value of "None" will remove an existing ICEsound™ configuration to use no ICEsound™ configuration. Values 1 (default), through 6 select the ICEsound™ configuration of the same number.
# Although, the available ICEsound™ configurations can have a substantial impact on sound quality, the different versions are provided to find the configuration most compatible with the rest of the installation with incredible sound quality.
# Because of the unpredictability of this file's impact on audio and functionality, descriptive names for the different ICEsound™ configurations are not logical and are simply numbered as they are Example:
use.ICEco**ig=1
1
2
3
4
5
6
None
use.ICEconfig=
# The following ICEsound™ presets are available below. A value of "None" will remove an existing preset to use no ICEsound™ preset. Enter a value of the preset name exactly as shown below. Example:
use.ICEsound.pr**et=01
BATHSALTS =01
DEEPBASS =02
HOLYSH*T =03
KRAZY =04
MOVIE =05
MUSIC2 =06
OUTDOORS =07
PURE (default) =08
PURESH*T =09
SHAT =10
WIDECLARITY =11
Default (pure) =12
None =None
use.ICEsound.preset=
## ICEsound™ END ##
# The ARISE™ modular installation zip works by using this file (when present in /sdcard as /sdcard/arise_customize.prop) to determine if any modules are to be UNINSTALLED by the value of "true" for each line below.
# Any value other than "true" is the same as a value of "false".
UNINSTALL.v4a=
UNINSTALL.atmos=
UNINSTALL.ddplus=
UNINSTALL.arkamys=
UNINSTALL.ICEsound=
UNINSTALL.am3d=
UNINSTALL.sony=
UNINSTALL.esira=
UNINSTALL.v4a_xhifi=
UNINSTALL.musicfx=
UNINSTALL.dirac=
## END ##
su
su -c dumpsys media.audio_flinger
su
dumpsys media.audio_flinger
[B]## Magnum Opus™ 20170506[/B] -
- More booted script corrections/enhancements.
- Enhanced the $SDCARD variable during recovery.
- Android O LDAC Bluetooth™ codec reassigned
as a satisfied scenario component.
- Experimental build with arisesound_setprop
disabled, enabling requires name change from
arisesound_disabled_setprop to arisesound_setprop.
##
/data/media/0
/data/media/legacy
/mnt/runtime/write/emulated/0
/mnt/runtime/write/emulated/legacy
/sdcard
/sdcard/0
/storage/emulated/0
/storage/emulated/legacy
getprop