FORUMS
Remove All Ads from XDA

[UNBRICK] [RECOVER IMEI] Unbrick hardbricked max pro m1 and recover IMEI [QFIL]

11 posts
Thanks Meter: 22
 
By yourkk, Junior Member on 15th August 2018, 04:41 PM
Post Reply Email Thread
Quote:

I am not responsible for bricked devices and dead SD cards. YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.

This thread is for those who's phone is hard bricked ( not even going to fast boot or recovery ). here we will explain how you can revive it.

things you need :-

1. QPST Tool - QPST Tool
2. QFIL Rom - ZB601KL/ZB602KL Download from HERE
3. Qcom drivers - Qcom drivers

First of all install QPST tool and drivers and extract QFIL rom after that go to QPST installed folder in my case that was C:\Program Files\Qualcomm\QPST\bin
open QFIL.exe



In Build type Select Flat Build


in Select Programmer go to that folder where u extracted Qfil rom.zip and select prog_emmc_ufs_firehose_Sdm660_ddr.elf


Now Click on Load xml and select rawprogram_unsparse_ww.xml in next window select patch0.xml
.

Quote:

SCREENSHOTS

now Connect your device now if you see Something else like Qualcomm HS-USB Diagnostics in place of no port Selected Click DownLoad else check drivers.
it will take some time after process completes you can boot your phone and this rom is not meant for daily uses so flash any fastboot rom now.


Backing Up IMEI (QCN) ?

things you need :-

1. QPST Tool - QPST Tool

2. Qcom drivers - Qcom drivers




Steps :

1. You should be on rooted stock rom. and Qcom drivers & QPST Tool installed on your pc.

2. Add ro.build.selinux=0 and sys.usb.config=diag,adb to build.prop now reboot.

3. connect your phone to pc and open Qfil select tools > QCN Backup Restore from menu bar. Click Backup in next window.

Done..

Note : if you see No Port Available in QFIL check drivers or step 2.


Restoring IMEI (QCN)



things you need :-

1. QPST Tool - QPST Tool

2. Qcom drivers - Qcom drivers




Steps :

1. You should be on rooted stock rom. and Qcom drivers & QPST Tool installed on your pc.

2. Add ro.build.selinux=0 and sys.usb.config=diag,adb to build.prop now reboot.

3. connect your phone to pc and open Qfil select tools > QCN Backup Restore from menu bar.

4. Choose your QCN file and Click Restore in next window.

Done..

Note : if you see No Port Available in QFIL check drivers or step 2.


Editing QCN File :



things you need :-

IMEI to HEX Converter - https://drive.google.com/file/d/1spy...ew?usp=sharing

HEx Editer - download ultra Edit (Do Google search)

1. Open QCN file with ultra Edit click find and search for old imei(hex use hex converter).

2. replace with new hex do for both imei and save.

done now you can restore.



Credits :
@Saktis_STi
- Akshat
@SagarMakhar
- Jakwarlord
And All who helped
The Following 18 Users Say Thank You to yourkk For This Useful Post: [ View ] Gift yourkk Ad-Free
27th August 2018, 03:49 PM |#2  
Senior Member
Thanks Meter: 44
 
More
will this allow me for ota updates??
11th October 2018, 10:52 AM |#3  
Senior Member
Flag kharkiv
Thanks Meter: 155
 
More
Is there any guide to restore serial number ?
11th October 2018, 07:43 PM |#4  
Jaheen's Avatar
Senior Member
Flag Chennai
Thanks Meter: 143
 
More
@ yourkk Could you please explain this "this rom is not meant for daily uses so flash any fastboot rom now." Do you mean that after your steps, mobile should be booting to fastboot and then stock firmware can be flashed?
11th October 2018, 10:06 PM |#5  
benchmarker's Avatar
Member
Thanks Meter: 57
 
More
Quote:
Originally Posted by Jaheen

@ yourkk Could you please explain this "this rom is not meant for daily uses so flash any fastboot rom now." Do you mean that after your steps, mobile should be booting to fastboot and then stock firmware can be flashed?

It will install QFIL Rom (Unofficial Stock ROM)
So flash Official STOCK or any desired Rom
The Following User Says Thank You to benchmarker For This Useful Post: [ View ] Gift benchmarker Ad-Free
11th October 2018, 10:14 PM |#6  
Senior Member
Flag kharkiv
Thanks Meter: 155
 
More
How to restore serial number ???
11th October 2018, 10:54 PM |#7  
Jaheen's Avatar
Senior Member
Flag Chennai
Thanks Meter: 143
 
More
Quote:
Originally Posted by benchmarker

It will install QFIL Rom (Unofficial Stock ROM)
So flash Official STOCK or any desired Rom

Thank you!
12th October 2018, 06:25 AM |#8  
AkashAlien's Avatar
Senior Member
Thanks Meter: 195
 
More
Quote:
Originally Posted by jide1

How to restore serial number ???

imei is serial number
12th October 2018, 07:51 AM |#9  
Senior Member
Flag kharkiv
Thanks Meter: 155
 
More
Quote:
Originally Posted by AkashAlien

imei is serial number

You must be an !
13th October 2018, 07:06 PM |#10  
Member
Thanks Meter: 4
 
More
Quote:
Originally Posted by jide1

How to restore serial number ???

Bazz 27:
http://androroot.com/2015/05/how-to-...and-seria.html try this
21st October 2018, 10:32 AM |#11  
Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by yourkk

This thread is for those who's phone is hard bricked ( not even going to fast boot or recovery ). here we will explain how you can revive it.

things you need :-

1. QPST Tool - QPST Tool
2. QFIL Rom - ZB601KL/ZB602KL Download from HERE
3. Qcom drivers - Qcom drivers

First of all install QPST tool and drivers and extract QFIL rom after that go to QPST installed folder in my case that was C:\Program Files\Qualcomm\QPST\bin
open QFIL.exe



In Build type Select Flat Build


in Select Programmer go to that folder where u extracted Qfil rom.zip and select prog_emmc_ufs_firehose_Sdm660_ddr.elf


Now Click on Load xml and select rawprogram_unsparse_ww.xml in next window select patch0.xml
.



now Connect your device now if you see Something else like Qualcomm HS-USB Diagnostics in place of no port Selected Click DownLoad else check drivers.
it will take some time after process completes you can boot your phone and this rom is not meant for daily uses so flash any fastboot rom now.


Backing Up IMEI (QCN) ?


things you need :-

1. QPST Tool - QPST Tool

2. Qcom drivers - Qcom drivers




Steps :

1. You should be on rooted stock rom. and Qcom drivers & QPST Tool installed on your pc.

2. Add ro.build.selinux=0 and sys.usb.config=diag,adb to build.prop now reboot.

3. connect your phone to pc and open Qfil select tools > QCN Backup Restore from menu bar. Click Backup in next window.

Done..

Note : if you see No Port Available in QFIL check drivers or step 2.


Restoring IMEI (QCN)



things you need :-

1. QPST Tool - QPST Tool

2. Qcom drivers - Qcom drivers




Steps :

1. You should be on rooted stock rom. and Qcom drivers & QPST Tool installed on your pc.

2. Add ro.build.selinux=0 and sys.usb.config=diag,adb to build.prop now reboot.

3. connect your phone to pc and open Qfil select tools > QCN Backup Restore from menu bar.

4. Choose your QCN file and Click Restore in next window.

Done..

Note : if you see No Port Available in QFIL check drivers or step 2.


Editing QCN File :



things you need :-

IMEI to HEX Converter - https://drive.google.com/file/d/1spy...ew?usp=sharing

HEx Editer - download ultra Edit (Do Google search)

1. Open QCN file with ultra Edit click find and search for old imei(hex use hex converter).

2. replace with new hex do for both imei and save.

done now you can restore.



Credits :
@Saktis_STi
- Akshat
@SagarMakhar
- Jakwarlord
And All who helped

Guys, the October update bricked my phone, so I used the Fastboot Firmware to restore my phone (WW_ZB601KL(ZB602KL)_15.2016.1805.316_20180706), but now my imei is gone 🙁 ! What do I do ? Please help me out !
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes