FORUMS
Remove All Ads from XDA

[Rom] [Ufirm_QE2_Hybrid_Nougat_Rom_FlashFire_Install][Status Official For All]

7,041 posts
Thanks Meter: 11,039
 
By jrkruse, Recognized Contributor on 16th July 2017, 12:20 AM
Post Reply Email Thread
Latest Ufirm QE2 Nougat Firmware For The S7 Edge Only
This well give you a Customizable NonRooted Rom that uses stock boot.img not the eng boot image so there is no lag and it will pass safetynet checks and samsung pay will work
Give this guy @umaro some thanks he worked on this until it became reality even when I gave up


Files To Download

Odin.zip

ADB_Root_G935U_QE2Files.zip
Mega Mirror Link

UFIRM_G935_Odin_Firmware.zip
Mega Mirror Link

FlashFire_Flashable_G935UFirmware.zip
Mega Mirror Link

UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_QE2_V 3.zip


These first 2 step must be done first unless you are on my previous version of this rom or my carrier specific rom that do not have root or if your unsure just do this first

This Will Wipe Your Phone

1. Unzip UFIRM_G935_Odin_Firmware.zip and flash all files in odin

2. Go through setup ignore invalid sim message and skip adding accounts

3. Goto Step 3 Below






If you are on one of my previous version of this rom or my carrier specific rom

1. Unzip UFIRM_G935_Odin_Firmware.zip

2. Use odin to flash BL and CP

3. Unzip ADB_Root_G935U_QE2Files.zip

4. Flash EngBoot image with odin

5. Root Phone. Im not going to have half a page about rooting there is an entire rooting thread here. The Eng Boot.img can be found in the UFIRM_QD2_Modified_Nougat_Firmware Folder

6. Unzip FlashFire_Flashable_G935UFirmware.zip

7. Copy AP_FlashFire_Only_G935U_QE2_Firmware.tar.md5 to internal storage of your phone

8. Copy UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_QE2_V 3.zip to internal storage of your phone

9. Open FlashFire and click Add Zip and choose UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_QE2_V 3.zip make sure to check mount system

10. Now in FlashFire click Add Firmware and choose AP_FlashFire_Only_G935U_QE2_Firmware.tar.md5 select all the partitions

11. Make sure Inject SuperSu is not selected

12. Click Add Wipe and choose Wipe Dalvik Cache and Cache and choose Format Cache Also select wipe SuperSU image. Make sure wipe is at end of flash sequence. The sequence should be AP file first then Zip second and Wipe cache last

13. Now Choose Flash

14. Phone will take Up to 20 minutes to boot

15. Reflashing Zip Will Require Flashing The AP File In FlashFire At The Same Time

16. Do not use Package Disabler Pro if you Choose NoNaMe mods in Aroma


MODS- (NoNaMeRomControl)

3minitbattery
Speed meter
Status bar mods
Center clock
Wifi/signal bar mods
Color change icon mod
Custom backgrounds
Notification drop-down
Incallui background
Gif in notification drop-down
Change/remove carrier names
And much more...


THANKS AND CREDITS
@jds3118 for testing and providing files and bootlooping his phone countless times for me

Gharrington for his awesome 3minitbattery mod...

NoNaMe rom development team for their incredible mods and rom control app...

@malbert16442 for his black themes

Xda for all the great guides to accomplish this...

Kernel source
RomControl Source
The Following 15 Users Say Thank You to jrkruse For This Useful Post: [ View ] Gift jrkruse Ad-Free
 
 
16th July 2017, 12:20 AM |#2  
jrkruse's Avatar
OP Recognized Contributor
Thanks Meter: 11,039
 
Donate to Me
More
I recommend everyone put the Flashfire AP zip and Rom Zip on your internal storage as the AP file is so large that it may not be read properly do too limitations of some SD Cards. When you select AP file in Firmware there should be 4 partitions that are selected. If not then you have a bad download or need to have AP file on internal storage
The Following 3 Users Say Thank You to jrkruse For This Useful Post: [ View ] Gift jrkruse Ad-Free
19th July 2017, 10:36 AM |#3  
Gotroot's Avatar
Senior Member
Thanks Meter: 288
 
Donate to Me
More
Do you know if this will work on the new BQF3?
19th July 2017, 02:11 PM |#4  
jrkruse's Avatar
OP Recognized Contributor
Thanks Meter: 11,039
 
Donate to Me
More
Quote:
Originally Posted by Gotroot

Do you know if this will work on the new BQF3?

This is Ufirm Rom it will work as you will be installing ufirmware. I would make you guys a QF3 based Rom but I guess no one is ever able to get Odin factory images on ATT. If someone can provide my a factory tar image I will make a QF3 based rom
20th July 2017, 04:13 AM |#5  
Senior Member
Flag Fresno, Ca
Thanks Meter: 66
 
Donate to Me
More
is it better than full stock ufirmware.?
20th July 2017, 04:31 AM |#6  
jrkruse's Avatar
OP Recognized Contributor
Thanks Meter: 11,039
 
Donate to Me
More
Quote:
Originally Posted by babbar559

is it better than full stock ufirmware.?

You guys don't seem to have any recent stock factory tar images to work with. So this what I have. Can't tell you how it compares to your stock as I am not AT&T I have Verizon but most people like it
20th July 2017, 04:34 AM |#7  
Senior Member
Flag Fresno, Ca
Thanks Meter: 66
 
Donate to Me
More
Quote:
Originally Posted by jrkruse

You guys don't seem to have any recent stock factory tar images to work with. So this what I have. Can't tell you how it compares to your stock as I am not AT&T I have Verizon but most people like it

does adaway & dual speaker mod work ?
20th July 2017, 04:50 AM |#8  
jrkruse's Avatar
OP Recognized Contributor
Thanks Meter: 11,039
 
Donate to Me
More
Quote:
Originally Posted by babbar559

does adaway & dual speaker mod work ?

Dual speaker mod does not work it causes playback issues in web videos. Adaway host blocking works. But it can not be turned on and off without flashing back stock host file with adb. Secure folder does not work but Samsung pay and pass do as well as all safteynet checking apps
20th July 2017, 03:16 PM |#9  
Junior Member
Thanks Meter: 5
 
More
This is actually a nice rom except im having problems getting LTE to work. I have to go into NNRomControl and change it to GSM auto (PRL) or Global auto (PRL). If I leave it at LTE I cannot make phone calls, any suggestions?
20th July 2017, 04:18 PM |#10  
jrkruse's Avatar
OP Recognized Contributor
Thanks Meter: 11,039
 
Donate to Me
More
Quote:
Originally Posted by Jandrsn36

This is actually a nice rom except im having problems getting LTE to work. I have to go into NNRomControl and change it to GSM auto (PRL) or Global auto (PRL). If I leave it at LTE I cannot make phone calls, any suggestions?

Does it work if you were to install full ufirmware via odin
20th July 2017, 04:47 PM |#11  
Junior Member
Thanks Meter: 5
 
More
Quote:
Originally Posted by jrkruse

Does it work if you were to install full ufirmware via odin

Yes, it does
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes