FORUMS
Remove All Ads from XDA

BlissOS-x86_64 Kernel Parameters reference

2 posts
Thanks Meter: 0
 
By XxyZ4114, Junior Member on 31st October 2019, 12:32 PM
Post Reply Email Thread
Hey,
Looking around online there seems to be a lot of confusion on kernel parameters and what they do, so let's get a central thread going to clarify exactly what each kernel paramter does.

Here's what I've come up with after a lot of trial and error, I know if this information was more readily avaible it would have saved me a fair chunk of time.

Please feel free to add to the list and I will try to maintain the list as I continue to verify and understand what each parameter does.
31st October 2019, 12:49 PM |#2  
OP Junior Member
Thanks Meter: 0
 
More
INSTALL=1 #Run an installer, ( Extracting kernel,initrd.img,system.sfs & ramdisk.img from the iso and adding a new grub entry is sufficient. I dunno, it must be a linux thing, you windows boys wont get it? )

root=/dev/ram0 #needs more explanation

SRC=/android/ #the location of system.img&ramdisk.img
DATA=/path #the directory to use for persistent storage. this path is relative to the SRC directory Alternatively, DATA can be assigned a block device.
CREATE_DATA_IMG=1 #needs more explanation
DATA_IN_MEM=1 #Needs verifying and more clarification
REMOUNT_RW=1 #Enable rw remount of /system


VULKAN=1 #Enable VULKAN api support
nomodeset #?disable autodetecting video output settings
vga=0x1d4 #load specific video output. To determine supported modes, at the grub loading screen press c to enter the console and use the command vbeinfo
2nd November 2019, 08:52 PM |#3  
Quote:
Originally Posted by XxyZ4114

INSTALL=1 #Run an installer, ( Extracting kernel,initrd.img,system.sfs & ramdisk.img from the iso and adding a new grub entry is sufficient. I dunno, it must be a linux thing, you windows boys wont get it? )

root=/dev/ram0 #needs more explanation

SRC=/android/ #the location of system.img&ramdisk.img
DATA=/path #the directory to use for persistent storage. this path is relative to the SRC directory Alternatively, DATA can be assigned a block device.
CREATE_DATA_IMG=1 #needs more explanation
DATA_IN_MEM=1 #Needs verifying and more clarification
REMOUNT_RW=1 #Enable rw remount of /system


VULKAN=1 #Enable VULKAN api support
nomodeset #?disable autodetecting video output settings
vga=0x1d4 #load specific video output. To determine supported modes, at the grub loading screen press c to enter the console and use the command vbeinfo

Most of these are documented in our https://docs.blissroms.com site. If you find anything that might need to be added, the repo can be found here: https://github.com/BlissRoms/Documentation-release and commits can be sent for review to https://review.blissroms.com

Thanks for helping out so far
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes