Only compatible with SM-G350! Only for Single-SIM variants with Android 4.2.2
Milestone release (nearly stable)
This is ready for daily use and is stable as possible!
Thanks to @berkantkz, @zim555 and @sandpox!
Report all unknown bugs in to the "Bug Reports" tab.
What is tested and working
- Boot, screen, basics..
- Audio input/ouput
- Mobile data
What is not working
- Calls with Bluetooth headphones. (includes any Bluetooth devices)
- Codecs are not usable for some browsers/apps.
- Some apps can't record video. GLES related problem.
ATTENTION! Video recording:
Recommended settings: 480p h.264 + aac
720p recording works only with mpeg4 encoding!
Set camera settings before trying to record video!
April 2018 (20180404)
- BlueBorne fixes
- Everything up to March ASB
- Other upstream changes
How to install:
Special thanks to @Giovix92 for making this tutorial!
1: A computer with Windows.
2: An Internet connection.
3: A backup of your phone data (contacts, photo, music, videos, and other).
4: About 300 MB free space on your SD card.
5: Phone charged at least 80%.
I do NOT take any responsibility for bricked devices!
1: Download the Samsung USB Drivers.
2: Download the ODIN3. (Only for Windows)
3: Download the TWRP Odin package to your desktop and download the LineageOS 11 ZIP to your SD card.
4: Make a backup of your files, because the storage will be wiped. (External SD card will not be wiped)
5: Reboot your phone in to the Download mode (Volume Down- , Home- and Power button). Press the Volume Up button when asked. Then open the ODIN3 and connect your phone to your PC.
6: Press AP and choose the TWRP Odin package and make sure re-partition is NOT ticked. (whatever.tar)
7: Press start! Wait a few seconds. Then your phone will be rebooted. Now you can disconnect the cable and power off your phone.
8: Boot your phone in to the TWRP Recovery (Volume Up-, Home- and Power button).
9: Go to Wipe, and Swipe to Factory Reset.
10. After wiping go to the home screen by pressing the home button.
11: Go to Install. Choose the External SD from the top bar. (It says "Storage: Internal Storage (xxxxMB)" by default)
12: Choose the LineageOS 11 ZIP and Swipe to Confirm Flash. Make sure you don't power off while flashing!
13: After the zip has been flashed choose "Reboot System".
14: Wait 5-15 minutes to boot the phone. If the phone keeps booting take out the battery and do a Factory Reset again.
15: When the phone boots the first time, go through the Setup Wizard and you are ready to use your phone!
If there was something you didn't understand, please don't hesitate to ask
LineageOS 11 for Samsung Galaxy Core Plus SM-G350, ROM for all devices (see above for details)
santeri3700, berkantkz, TimSchumi
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Current Stable Version: Anniversary Release
Stable Release Date: 2017-12-31
Last Updated 2018-04-05