Guys. I'm on stock 6.0 rooted + xposed. The thundercharge isn't working for me. My adapter provides upto 2.1 A. But my device charges with only 650 mA.
[KERNEL][MM/LP][Mar 31][3.10.101+] ThunderZap 5.2 | The King of Hell!
- Thread starter varun.chitre15
- Start date
Try to connect phone with charger and select screen timeout for more than 30min start ampere app .
It takes some time to increase the charge rate my device takes 1-3min to get 1020mA try to measure for 1-3min.
Make sure no App is running during measurement.
After a few reboots it started working. Reached 800 mA. Thanks.
---------- Post added at 08:33 PM ---------- Previous post was at 08:31 PM ----------
The thunderzap app automatically resets it to 980.
---------- Post added at 08:33 PM ---------- Previous post was at 08:31 PM ----------
The thunderzap app automatically resets it to 980.
Done. But i just checked and i saw that it's stuck at 650 mA. I set it to highest then when i restart the app it shows 650 everytime.
Similar threads
- Poll
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
99
The kernel is based off latest sources from Google and is compatible with all of the Android One devices. Over stock kernel this kernel possesses following enhancementsCode:#include /* * I am not responsible for bricked devices, dead SD cards, thermonuclear * war, or the current economic crisis caused by you following these * directions. YOU are choosing to make these modificiations, and * if you point your finger at me for messing up your device, I will * laugh at you. */
- Insecured
- adb runnable as root
- ThunderSonic Sound Control Engine
- ThunderCharge Fast Charge Driver
- ThunderPlug CPU Hotplug replacement
- WiFi Power management control
- Full GPU control
- DoubleTap2Wake and Sweep2Wake
- Dynamic Fsync Control
- Improved filesystem mounting flags - NOATIME and NODIRATIME
- ThunderQuake Engine 1.0 - Vibration Intensity Controller for MTK vibrators
- Huge update to kernel.org mainline 3.10.89
- init.d support
- Automatic busybox installation
- Disabled Gentle fair sleepers
- Enabled arch power
- Optimizations to SLUB memory allocator
- Patches to block and mm to significantly improve ssd IO performance.
- Dynamic entropy setting based on usage
- Dynamic management of dirty page writebacks
- block: Added SIO IOScheduler
- block: Add BFQ IOScheduler
- block: Add fiops scheduler
- cpufreq: ThunderX power saving CPU governor
- fs: added Samsung's F2FS support
- Reduce logger device RAM allocation to 128K
- Set MM Linux read ahead size to 256K
- Patches from upstream to optimize memory writeback
- Disabled CRC check in MMC for 30% extra performance with IO
- Reduced VFS cache pressure for better battery
- Optimized square root algorithm
- Governors enabled: ondemand, interactive
- Speedup /proc/net/unix interface access
- Mali GPU cache Optimizations
- Mali: Increase L2 cache max read size
- Mali: Disable state tracking
- Mali: Reduce GPU utilization timeout
- Mali: increase kernel memory buffer size
- Aggressive multicore power savings
- ARM: Cortex A7 compiler optimizations
- MTK: removed HUGE HUGE trail of stupid MTK kernel logging
- ARM: Removed various debug traces
DOWNLOAD
INSTRUCTIONS
- Just flash the zip you want in recovery and you are good to go!
Source:
https://github.com/varunchitre15/thunderzap_sprout
XDA:DevDB Information
ThunderZap, Kernel for the OEM Cross Device Development
Contributors
varun.chitre15
Source Code: https://github.com/varunchitre15/thunderzap_sprout
Kernel Special Features:
Version Information
Status: Stable
Created 2014-09-28
Last Updated 2016-03-3026Changelog
ThunderZap 2.5 - 27/Dec/14
Code:- Introducing ThunderQuake Engine 1.0 - Vibration Intensity Controller for MTK vibrators - Compatibility with CyanogenMod 11 - Upstream update to 3.4.105 - Optimized square root algorithm - Disabled CRC check in MMC for 30% extra performance with IO - Reduced latencies in SoftIRQ - Reduced VFS cache pressure for better battery - Optimized dirty ratios to reduce standby CPU consumption - Removed a lot of Mediatek debug **** - EXT4 FS patch from Linux 3.11 - Interactive build script with bootimage creation code
ThunderZap 2.0 - 25/Oct/14
Code:- Huge update to kernel.org mainline 3.4.104 - Merged Updates from Google's mediatek repo - Improved touchscreen performance - Improved boot time - Improved front camera quality - Patches by NVIDIA to improve power efficiency - tested and results are noticeable - init.d support - Automatic busybox installation
ThunderZap 1.0
Code:- Initial Release18Feature controlling
All the features can be controlled from ThunderZap Control app! Get it from Play Store
Free: https://play.google.com/store/apps/details?id=com.varun.thunderzapcontrol
Pro: https://play.google.com/store/apps/details?id=com.varun.thunderzapcontrolpro16ThunderZap 3.0
- Universal compatibility across stock and CM12.1
- Updated to upstream Linux 3.10.73
- Rewritten Vibration Control for Linux 3.10
This release officially marks end of support for KitKat.
Visit my site post for more details on this release11Super Cool Bro....
you Rock!
Antutu Benchmarks From 182xx to 192xx Super Awesome!
Configuration:
Bfq+hotplug+zram
