FORUMS
Remove All Ads from XDA

Windows 10 MTK VCOM USB Drivers for 32 & 64 bit + Driver install tutorial M2

8,631 posts
Thanks Meter: 12,930
 
By skeleton1911, Senior Member on 9th December 2015, 09:15 AM
Post Reply Email Thread
Windows 10 MTK VCOM USB Drivers for 32 & 64 bit + Driver install tutorial

To determine the version of Windows 10 that you have (32 bit or 64 bit):

- Right-click on Start then click on System
- In the System window that opens, in System section, you will find your version of Windows next to System type

To disable Windows 10 64 bit driver signature enforcement:
- On your 64 bit Windows 10 desktop click on Start then on Settings
- Click on Update & security then in the left pane click on Recovery
- Under Advanced startup click on Restart now button
- Click on Troubleshoot then on Advanced options
- Click on Startup Settings then on Restart button
- The computer will restart with the Startup Settings screen
- To disable the driver signature enforcement until next restart press on number key 7 or F7 on your keyboard.
- After restart you can proceed with the unsigned MTK drivers installation for your 64 bit Windows
- After you install the unsigned drivers, to use them again in the future, you have to repeat this procedure

To install the MTK VCOM USB Drivers on 32 & 64 bit Windows 10:


- Download the drivers *.zip archive and extract the folder from inside on to the desktop:
https://www.androidfilehost.com/?fid=24269982087012126




Right-click on Start then click on Device Manager



In the Device Manager Window click on the first item – your computer name




Click on Action then Add legacy hardware



On the Welcome to the Add hardware Wizard window click on Next button



Select Install the hardware that I manually select from a list (Advanced) and then click on Next button



Click on Show All Devices then on Next button




In the Add Hardware window click on Have Disk… button




In the Install From Disk windows click on Browse… button
In the next window – Locate file – browse for the folder that you have extracted on the desktop at the beginning




Select the version of the driver according to your Windows 10 version – x64 for 64 bit and x86 for 32 bit and click Open button



Click the OK button to load the driver



From the list of drivers select MTK USB Port and click on Next button



If a red warning window will open, click on Install this driver software anyway

This action will add the following drivers in to the operating system:

- MediaTek DA USB VCOM Port
- MediaTek PreLoader USB VCOM Port – for transferring the firmware to your device
- MTK USB DEBUG Port
- MTK USB Modem Port
- MTK USB port – for transfering PreLoader to your device (and recovery in case of bad or corrupt firmware)


Now we need to remove the device that we have installed but leave the drivers in the operating system.
To do that, in the Device Manager window we expand Ports (COM & LPT) section




Right-click and click Uninstall on the MTK USB Port



- In the Confirm Device Uninstall window make sure that the box Delete the driver software for this device is empty
- You need to leave the drivers in the operating system and only remove the device that you added
- Click on the OK button to finalise


Now, when you will connect your turned off MTK device to the Windows 10 computer by USB, the device will be recognized either trough a MediaTek Preloader USB VCOM Port interface or as a MTK USB port if it is bricked or it has bad/corrupt firmware. The SP Flash Tool will be able to transfer the firmware to your device trough this interfaces. Make sure you connect the device after you press the Download button in SP Flash Tool, as the communication interface will only be alive for 2 seconds if no data is being sent.

Download SP Flash Tool v3 & v5 – Latest versions:
http://laurentiumihet.ro/technology/...test-versions/


TUT found here : http://laurentiumihet.ro/technology/...tion-tutorial/

cheers
The Following 24 Users Say Thank You to skeleton1911 For This Useful Post: [ View ] Gift skeleton1911 Ad-Free
 
 
9th December 2015, 07:04 PM |#2  
Junior Member
Thanks Meter: 1
 
More
Hi, in my computer doesn´t appears the red window. Are you know Why?
9th December 2015, 07:05 PM |#3  
skeleton1911's Avatar
OP Senior Member
Flag münster
Thanks Meter: 12,930
 
Donate to Me
More
Quote:
Originally Posted by amilcar50

Hi, in my computer doesn´t appears the red window. Are you know Why?

You used win7/8? If yes its normal.
If win10. Then you have luck
Gesendet von meinem Elephone P8000 mit Tapatalk
9th December 2015, 07:25 PM |#4  
Junior Member
Thanks Meter: 1
 
More
I use Windows 10 64 bits
The Following User Says Thank You to amilcar50 For This Useful Post: [ View ] Gift amilcar50 Ad-Free
3rd February 2016, 06:40 PM |#5  
Senior Member
Thanks Meter: 16
 
More
hi mate , in win10 64bit it says "error does not contain digital signature information"

edit: i installed with digital signature disable in win 10
3rd February 2016, 06:55 PM |#6  
skeleton1911's Avatar
OP Senior Member
Flag münster
Thanks Meter: 12,930
 
Donate to Me
More
Quote:
Originally Posted by lost3

hi mate , in win10 64bit it says "error does not contain digital signature information"

It happens to me too . once.
I did it with that
http://bbs.elephone.hk/thread-1037-1...l#.VWgkX_RAU-0

Take the drivers from there and make it the dirty way.
It will say signature fails.. Then look into c:/windows/program/ mtk drivers or mediatek folder.
Open the device manager and plug in the phone.
You will see a new USB connection. Klick there and install the drivers from the folder above. .
I did it 2 times. Then it works on win10 64bit

Gesendet von meinem Elephone P8000 mit Tapatalk
4th March 2016, 05:45 PM |#7  
Junior Member
Thanks Meter: 0
 
More
now we can solve LeTv Le 1s Bootloop Issue on windows 10
thanks alot now we can solve LeTv Le 1s Bootloop Issue on windows 10 .. :happytears:
11th April 2016, 05:56 AM |#8  
Junior Member
Flag Purwakarta
Thanks Meter: 2
 
More
What should I do when "Eror code 10: device can't start" popped up? Thanx.
30th April 2016, 02:29 PM |#9  
Junior Member
Thanks Meter: 0
 
More
all steps done still not detecting my phone
pls help...
30th April 2016, 02:31 PM |#10  
skeleton1911's Avatar
OP Senior Member
Flag münster
Thanks Meter: 12,930
 
Donate to Me
More
Quote:
Originally Posted by ghanta

all steps done still not detecting my phone
pls help...

Restore the imei manual
.try this
http://forum.xda-developers.com/elep...-imei-t3187059

Gesendet von meinem Elephone P8000 mit Tapatalk
30th April 2016, 06:44 PM |#11  
Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by skeleton1911

Restore the imei manual
.try this
http://forum.xda-developers.com/elep...-imei-t3187059

Gesendet von meinem Elephone P8000 mit Tapatalk

Sorry but did not understand what are you referring to?
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread