Remove All Ads from XDA

TV not changing to correct input, when home button on Fire TV remote controller is pr

346 posts
Thanks Meter: 95
By halfbytecode, Senior Member on 5th January 2020, 10:55 AM
Post Reply Email Thread

I have 2nd gen Fire TV stick non-4K. I have configured the correct inputs for cable and Fire TV, in the Fire TV settings. HDMI-CEC is enabled as well.

Speaking "Alexa, switch inputs" seems to work fine.

However, I want my TV to change to correct input automatically when I press the home button on the fire TV stick remote.

How to get this to work?
6th January 2020, 02:18 AM |#2  
Senior Member
Thanks Meter: 42
Are you using launcherhijack?
6th January 2020, 12:46 PM |#3  
OP Senior Member
Thanks Meter: 95
Originally Posted by JUSTINMARMER

Are you using launcherhijack?

I am running stock launcher, unrooted as well.
9th January 2020, 12:55 AM |#4  
I always have to long press home then home again to get it to switch to the right input through cec
11th January 2020, 10:39 AM |#5  
OP Senior Member
Thanks Meter: 95
I found the reason for this issue. It turns out Anynet+ (HDMI-CEC on Samsung) does not connect to firetv, if I have my cable HDMI also plugged into the TV.

Removing the cable HDMI, and just having firetv stick plugged into the TV, makes HDMI-CEC work fine.

With Anynet+ functioning, I am able to change inputs correctly by pressing Home button + Back button on the fire TV stick remote.

I still don't know how to make Anynet+ work with my cable plugged in.
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes