FORUMS
Remove All Ads from XDA

[GUIDE] Proper H815 unbrick through QFIL (Files included)

87 posts
Thanks Meter: 22
 
By inteLzzz, Member on 23rd November 2017, 04:09 PM
Post Reply Email Thread
29th July 2018, 02:51 AM |#21  
Junior Member
Thanks Meter: 0
 
More
Dude I did all of your words but still get this error.

Start Download
Program Path:C:\Users\Neri1\Desktop\h815_full_working_7a3a e5809224d\flashing\prog_emmc_firehose_8992_lite.mb n
COM Port number:4
Sahara Connecting ...
Sahara Version:2
Start Sending Programmer
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
COM Port number:4
Sending NOP
FireHose Log: Binary build date: Mar 3 2015 @ 19:29:19
FireHose Log: fh.attrs.Verbose is set to 0
FireHose Log: Chip serial num: 22897967 (0x15d652f)
FireHose Log: Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke
FireHose NOP sent successfully
Sending Configuration
Device Type:eMMC
Platform:8x26
FireHose Log: Host's hash buffer size not provided or 0; using 8192
FireHose Log: fh.attrs.MaxPayloadSizeToTargetInBytes > FIREHOSE_CHANNEL_BUFFER_SIZE
FireHose Log: Calling hotplug_poll_device('MMC')
Invalid response NAK
Set TxBuffer 0x2000, RxBuffer 0x1000
Firehose configure packet sent successfully!
ReadBackMode:No_Readback
Disable read back
Total Bytes To Program 0x4C4F0A0
Download Image
Fail to open image file: C:\Users\Neri1\Desktop\h815_full_working_7a3ae5809 224d\flashing\emmc_appsboot.mbn
Error reading the C:\Users\Neri1\Desktop\h815_full_working_7a3ae5809 224d\flashing\rawprogram0.xml
Download Fail:FireHose Fail FireHose Fail:Failed to Upload the emmc images to the phone using Firehose.
Finish Download
 
 
29th July 2018, 09:21 PM |#22  
Junior Member
Thanks Meter: 2
 
More
Help post your edited raw-program
Can you please help post your edited raw-program.xml so I could also make use of it as all attempts to get into download mode even after successful download from QFIL proved abortive


Quote:
Originally Posted by ososmam

finally it boot again i chanced
these 3 files laf , emmc_appsboot , raw_resources
with laf,aboot, raw_resources from h815-usu unlock files
and edited the raw-program to match these files
also change the recovery with twrp
fianaly can boot to fastboot and twrp


Later did edit the partition-p1_global_com.xml, rawprogram0.xml and readback.xml to reflect files from the Usu unlock folder and voila, my G4 is alive. Thanks to you all for your efforts and for sharing
The Following 2 Users Say Thank You to neptunej For This Useful Post: [ View ] Gift neptunej Ad-Free
30th July 2018, 06:09 PM |#23  
Junior Member
Thanks Meter: 0
 
More
can you share your edited usu xml files
30th July 2018, 07:32 PM |#24  
Junior Member
Thanks Meter: 0
 
More
thnx a lot I did
31st July 2018, 11:37 AM |#25  
Junior Member
Thanks Meter: 0
 
More
I solved brick problem but when I flash g4 usu firmwares my device always bootloops. How can I solve this
31st July 2018, 12:05 PM |#26  
steadfasterX's Avatar
Recognized Developer
Thanks Meter: 11,053
 
Donate to Me
More
Quote:
Originally Posted by neptunej

Can you please help post your edited raw-program.xml so I could also make use of it as all attempts to get into download mode even after successful download from QFIL proved abortive





Later did edit the partition-p1_global_com.xml, rawprogram0.xml and readback.xml to reflect files from the Usu unlock folder and voila, my G4 is alive. Thanks to you all for your efforts and for sharing

Quote:
Originally Posted by Creear

can you share your edited usu xml files

There is no need to modify the XML as mentioned here:
https://forum.xda-developers.com/sho...2&postcount=20
and as well directly in the second post of this thread.

Quote:
Originally Posted by Creear

I solved brick problem but when I flash g4 usu firmwares my device always bootloops. How can I solve this

how do you flash? fastboot, TWRP, lgup, ...?
and what exactly do you flash?

.
The Following User Says Thank You to steadfasterX For This Useful Post: [ View ]
31st July 2018, 12:18 PM |#27  
Junior Member
Thanks Meter: 0
 
More
just TWRP

---------- Post added at 12:18 PM ---------- Previous post was at 12:12 PM ----------

I tried 3 usu firmwares but while booting sound crashes and starts rebooting and I just flashed firmwares from TWRP
31st July 2018, 12:20 PM |#28  
steadfasterX's Avatar
Recognized Developer
Thanks Meter: 11,053
 
Donate to Me
More
Quote:
Originally Posted by Creear

just TWRP

---------- Post added at 12:18 PM ---------- Previous post was at 12:12 PM ----------

I tried 4 usu firmwares but while booting sound crashes and starts rebooting and I just flashed firmwares from TWRP

when someone asks you what ROM you try to flash share the exact filename, link or more details.
What QFIL files do you have used? the one from this OP or others?
boot to TWRP and share the TWRP recovery log (see my sig for a howto)
The Following User Says Thank You to steadfasterX For This Useful Post: [ View ]
31st July 2018, 01:26 PM |#29  
Junior Member
Thanks Meter: 0
 
More
when installing %99 reboots starting sound crashes and this continues again and again

---------- Post added at 12:29 PM ---------- Previous post was at 12:26 PM ----------

G4_ARB-any_v29a_FULL-STOCK-ROM_UsU .............. LG-H815_Official_v29A .............. LG-H815_Official_v29A_keepsTWRP-LAF.zip

---------- Post added at 01:26 PM ---------- Previous post was at 12:29 PM ----------

QFIL from this OP ....................................... I:TUNESD: 2015-01-01_00:04:32 - Started /sbin/tunesd.sh
I:READTIME: 2015-01-01_00:04:32 - Starting /sbin/readtimeprop.sh
I:READTIME: 2015-01-01_00:04:32 - timeadjust before setprop: ><
Starting TWRP 3.2.2-PREVIEW-131_g4_N-fac1b383-dirty on Thu Jan 1 00:04:32 2015
(pid 343)
RECOVERY_SDCARD_ON_DATA := true
TW_NO_USB_STORAGE := true
TW_INCLUDE_CRYPTO := true
I:Find_File: Error opening '/sys/class/backlight'
I:Found brightness file at '/sys/class/leds/lcd-backlight/brightness'
I:Got max brightness 255 from '/sys/class/leds/lcd-backlight/max_brightness'
I:TWFunc::Set_Brightness: Setting brightness control to 162
I:LANG: en
Starting the UI...
setting DRM_FORMAT_RGBX8888 and GGL_PIXEL_FORMAT_RGBX_8888
cannot find/open a drm device: No such file or directory
fb0 reports (possibly inaccurate):
vi.bits_per_pixel = 32
vi.red.offset = 0 .length = 8
vi.green.offset = 8 .length = 8
vi.blue.offset = 16 .length = 8
I:READTIME: 2015-01-01_00:04:32 - checking for twrp fstab
I:READTIME: 2015-01-01_00:04:32 - No twrp fstab which includes /system generated yet! will wait until its there..
setting GGL_PIXEL_FORMAT_RGBA_8888
double buffered
framebuffer: 0 (1440 x 2560)
Using fbdev graphics.
I:TWFunc::Set_Brightness: Setting brightness control to 162
I:Loading package: splash (/twres/splash.xml)
I:Load XML directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/splash.xml' directly
I:Checking resolution...
I:Scaling theme width 1.333333x and height 1.333333x, offsets x: 0 y: 0 w: 0 h: 0
I:Loading resources...
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Loading page splash
I:Switching packages (splash)
=> Linking mtab
31st July 2018, 01:27 PM |#30  
steadfasterX's Avatar
Recognized Developer
Thanks Meter: 11,053
 
Donate to Me
More
Quote:
Originally Posted by Creear

when installing %99 reboots starting sound crashes and this continues again and again

---------- Post added at 12:29 PM ---------- Previous post was at 12:26 PM ----------

G4_ARB-any_v29a_FULL-STOCK-ROM_UsU .............. LG-H815_Official_v29A .............. LG-H815_Official_v29A_keepsTWRP-LAF.zip

---------- Post added at 01:26 PM ---------- Previous post was at 12:29 PM ----------

QFIL from this OP

My guide says clearly to use bpaste.net for shareing the recovery log

.-
The Following User Says Thank You to steadfasterX For This Useful Post: [ View ]
31st July 2018, 01:31 PM |#31  
Junior Member
Thanks Meter: 0
 
More
[/COLOR]https://bpaste.net/show/b69fb489a786
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes