[Unbrick] How to revive H815 - no recovery/fastboot/download mode

Search This thread

Jirrick

Senior Member
Mar 10, 2011
125
47
Prague
jirrick.eu
Today something went wrong while flashing weekly LOS build and my LG G4 (H815 with v20P firmware) went into very fast bootloop: https://www.youtube.com/watch?v=9gm0dh6bLp4

In this state i wasn't able to enter recovery, nor fastboot, nor download mode. Only IMEI screen (Vol Up + Vol Down I believe) was accessible which was no use.

Here are the steps which got me out of troubles:
A) Verify that you have LGUP installed and have proper 8994.dll version for your device.
Different versions of FW use different libraries which results in errors during flashing.
Steps:
1) Install LGUP with this guide https://xdaforums.com/g4/help/lgup-install-kdz-mm-lp-t3249803
2) Get the right DLL. You can try this one:
FIX REFUBRISH/DOWNGRADE ETC STUCK AT 16% DOWNLOAD MODE UNABLE TO GET BACK TO STOCK
error 0x2000 invalid command response Has Been FixeD WITH THE LASTEST DLL FILE
FILE INCLUDE (DLL+PATCH_DLL+SETUP LGUP+DRIVER) package
Please Read The *READ ME FILE FOR THE RIGHT INSTALLATION WITHOUT GETTING ANY PROBLEM :
Link Easy To Download No Ads Bulllsh*t.................. :
https://drive.google.com/file/d/0B_yWw6RLoA-gdTMtZFczMUhQOHM/view?usp=sharing
...or extract it directly from KDZ file with extractor https://xdaforums.com/showthread.php?t=2600575.
You need to extract it from FW version that your phone is already running, not from the one you are about to flash! (when flashing from v20d to v20p you need v20d version, but when reflashing v20p FW you need the v20p DLL)
3) Navigate to LGUP install folder (default "C:\Program Files (x86)\LG Electronics\LGUP")
4) Overwrite the old DLL located in "model\8994" folder version with new one in

I don't know the exact compatibility, or how many different DLL versions are out there. Hopefully it doesn't brick the device even more when wrong version is used, it just doesn't work.

B) Write h815 image to sdcard as mentioned here:
Hi guys,
i came up with a temporary to unbrick LG G4 H815 , you just need a 32 GB SD card ( i used Sandisk 10 class) , the dump that i will link , and Win32 disk Imager, the SD card must low level formatted.
1- download this dump
http://www.4shared.com/rar/NzSqsBzib...230737_00.html

2- put the SD card in the PC and chose the dump file and write ( run as admin ):
It worked for me with just 8GB one. Be aware that the image written to SD have like 20 partitions so windows might go crazy.

C) Follow these steps:
3. One the Write Completes. Eject Card and insert in your LG G4 H811. Press Volume Up Button while connecting the USB Cable.
4. There you go, it will open the download mode.

D) At this moment my G4 finally entered Download mode
I was able to reflash KDZ using the usual procedure (select UPGRADE, find a KDZ file, restart LGUP, select REFURBRISH and START). Initially I got 0x2000 error at approximately 16% (boot displayed as status) that was caused by old version of 8994.dll library.

E) Back to stock
Now you should have stock H815 again so lets flash LOS back as usual :)

Kudos to OPs: @bullghost , @shakeyabooti , @leptdre , @jam1445 and other posters on G4 section of XDA!

Hope this helps someone!
 
Last edited:
  • Like
Reactions: tulen_kobi and htr5

pedrogcsb

Senior Member
Jul 19, 2015
84
7
Coimbra
Good job. If your using this and you're gonna buy a SDCard on purpose, be aware that this fix might not work on your device. Ehehe
 
Aug 26, 2013
9
1
VS986 Stuck on Download Mode

Today something went wrong while flashing weekly LOS build and my LG G4 (H815 with v20P firmware) went into very fast bootloop: https://www.youtube.com/watch?v=9gm0dh6bLp4

In this state i wasn't able to enter recovery, nor fastboot, nor download mode. Only IMEI screen (Vol Up + Vol Down I believe) was accessible which was no use.

Here are the steps which got me out of troubles:
A) Verify that you have LGUP installed and have proper 8994.dll version for your device.
Different versions of FW use different libraries which results in errors during flashing.
Steps:
1) Install LGUP with this guide https://xdaforums.com/g4/help/lgup-install-kdz-mm-lp-t3249803
2) Get the right DLL. You can try this one:
...or extract it directly from KDZ file with extractor https://xdaforums.com/showthread.php?t=2600575.
You need to extract it from FW version that your phone is already running, not from the one you are about to flash! (when flashing from v20d to v20p you need v20d version, but when reflashing v20p FW you need the v20p DLL)
3) Navigate to LGUP install folder (default "C:\Program Files (x86)\LG Electronics\LGUP")
4) Overwrite the old DLL located in "model\8994" folder version with new one in

I don't know the exact compatibility, or how many different DLL versions are out there. Hopefully it doesn't brick the device even more when wrong version is used, it just doesn't work.

B) Write h815 image to sdcard as mentioned here:
It worked for me with just 8GB one. Be aware that the image written to SD have like 20 partitions so windows might go crazy.

C) Follow these steps:


D) At this moment my G4 finally entered Download mode
I was able to reflash KDZ using the usual procedure (select UPGRADE, find a KDZ file, restart LGUP, select REFURBRISH and START). Initially I got 0x2000 error at approximately 16% (boot displayed as status) that was caused by old version of 8994.dll library.

E) Back to stock
Now you should have stock H815 again so lets flash LOS back as usual :)

Kudos to OPs: @bullghost , @shakeyabooti , @leptdre , @jam1445 and other posters on G4 section of XDA!

Hope this helps someone!
I just did all your steps for my VS986 , and I got 2 G4 Verizon's back up and working , Thank you so much.

---------- Post added at 10:54 AM ---------- Previous post was at 10:53 AM ----------

I just did all your steps for my VS986 , and I got 2 G4 Verizon's back up and working , Thank you so much.
 

inteLzzz

Senior Member
Jun 1, 2011
85
27
Latvia
I'm using a 16gb microsd, but however I try to image it (exfat, fat32 filesystems, different win32imager versions) also have tried different cables, but it still doesn't show any sign of life. I bricked it exactly the same way as OP did. Does anyone have anything else I could try to fix this? Also does the battery charge when its on 9008 mode?
 

Jirrick

Senior Member
Mar 10, 2011
125
47
Prague
jirrick.eu
I'm using a 16gb microsd, but however I try to image it (exfat, fat32 filesystems, different win32imager versions) also have tried different cables, but it still doesn't show any sign of life. I bricked it exactly the same way as OP did. Does anyone have anything else I could try to fix this? Also does the battery charge when its on 9008 mode?
Can you get at least to the IMEI Display mode (Vol UP and then quickly Vol DOWN, keep both pressed until it shows up)?
 

Jirrick

Senior Member
Mar 10, 2011
125
47
Prague
jirrick.eu
Sorry to hear that. I'm afraid this is beyond my knowledge if it wont even enter the IMEI screen. I suppose you can leave it bootlooping in charger over night and then try in the morning?
 

inteLzzz

Senior Member
Jun 1, 2011
85
27
Latvia
Sorry to hear that. I'm afraid this is beyond my knowledge if it wont even enter the IMEI screen. I suppose you can leave it bootlooping in charger over night and then try in the morning?

It does not bootloop, straight up dead. Just shows 9008 forever on the pc, I left it for like 2 hours like that yesterday. I'll leave it overnight today and if not I'll hack up a direct 5v 1a charger to charge the battery directly. If both don't work i'll probably flash LS991 files in QFIL and use it as a tablet afterwards.. damn i got this phone not even 2 weeks ago perfect condition and all. Will not buy any more damn LG devices.
 

Jirrick

Senior Member
Mar 10, 2011
125
47
Prague
jirrick.eu
Oh, I thought your phone was rapidly bootlooping like mine did. Sounds like the person who sold it to you was aware that the phone is on last legs (probably even baked the phone so it runs for few days more) and screwed you over. My next phone wont be LG either.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Today something went wrong while flashing weekly LOS build and my LG G4 (H815 with v20P firmware) went into very fast bootloop: https://www.youtube.com/watch?v=9gm0dh6bLp4

    In this state i wasn't able to enter recovery, nor fastboot, nor download mode. Only IMEI screen (Vol Up + Vol Down I believe) was accessible which was no use.

    Here are the steps which got me out of troubles:
    A) Verify that you have LGUP installed and have proper 8994.dll version for your device.
    Different versions of FW use different libraries which results in errors during flashing.
    Steps:
    1) Install LGUP with this guide https://xdaforums.com/g4/help/lgup-install-kdz-mm-lp-t3249803
    2) Get the right DLL. You can try this one:
    FIX REFUBRISH/DOWNGRADE ETC STUCK AT 16% DOWNLOAD MODE UNABLE TO GET BACK TO STOCK
    error 0x2000 invalid command response Has Been FixeD WITH THE LASTEST DLL FILE
    FILE INCLUDE (DLL+PATCH_DLL+SETUP LGUP+DRIVER) package
    Please Read The *READ ME FILE FOR THE RIGHT INSTALLATION WITHOUT GETTING ANY PROBLEM :
    Link Easy To Download No Ads Bulllsh*t.................. :
    https://drive.google.com/file/d/0B_yWw6RLoA-gdTMtZFczMUhQOHM/view?usp=sharing
    ...or extract it directly from KDZ file with extractor https://xdaforums.com/showthread.php?t=2600575.
    You need to extract it from FW version that your phone is already running, not from the one you are about to flash! (when flashing from v20d to v20p you need v20d version, but when reflashing v20p FW you need the v20p DLL)
    3) Navigate to LGUP install folder (default "C:\Program Files (x86)\LG Electronics\LGUP")
    4) Overwrite the old DLL located in "model\8994" folder version with new one in

    I don't know the exact compatibility, or how many different DLL versions are out there. Hopefully it doesn't brick the device even more when wrong version is used, it just doesn't work.

    B) Write h815 image to sdcard as mentioned here:
    Hi guys,
    i came up with a temporary to unbrick LG G4 H815 , you just need a 32 GB SD card ( i used Sandisk 10 class) , the dump that i will link , and Win32 disk Imager, the SD card must low level formatted.
    1- download this dump
    http://www.4shared.com/rar/NzSqsBzib...230737_00.html

    2- put the SD card in the PC and chose the dump file and write ( run as admin ):
    It worked for me with just 8GB one. Be aware that the image written to SD have like 20 partitions so windows might go crazy.

    C) Follow these steps:
    3. One the Write Completes. Eject Card and insert in your LG G4 H811. Press Volume Up Button while connecting the USB Cable.
    4. There you go, it will open the download mode.

    D) At this moment my G4 finally entered Download mode
    I was able to reflash KDZ using the usual procedure (select UPGRADE, find a KDZ file, restart LGUP, select REFURBRISH and START). Initially I got 0x2000 error at approximately 16% (boot displayed as status) that was caused by old version of 8994.dll library.

    E) Back to stock
    Now you should have stock H815 again so lets flash LOS back as usual :)

    Kudos to OPs: @bullghost , @shakeyabooti , @leptdre , @jam1445 and other posters on G4 section of XDA!

    Hope this helps someone!
    1
    @Jirrick im getting the same error on LGUP where do i find a newer version of the dll?

    are these what you looking for.?
    https://xdaforums.com/showpost.php?p=73586554&postcount=921