TWRP 3.2.1-0 Released
Dec 9, 2017
TWRP 3.2.1-0 is out now for most currently supported devices.
What's new in 3.2.1-0:
* minui fixes (cryptomilk)
* Better android-8.0 compatibility in ROM trees (Dees_Troy)
* Fix missing library in android-8.0 (nkk71)
* Fix inconsistent SDCard naming (DevUt)
* Default to TWRP restore instead of adb backup restore to fix restore on fresh TWRP boot (jlask)
TWRP 3.2.1-1NN build released
Current status: Beta
TWRP 3.1.1-1 NN build released.
Current status: Stable
SEANDROID warning fix
TWRP and Kernel built from latest source
Factory Image flashing(see below)
F2FS support >> To be added
Twrp app support
New feature available in TWRP v3 is system image backup and restore and factory image flashing (see TWRP changelog for details)
Basically this means factory system images from the official firmware can now be flashed with TWRP.
This feature can be found under INSTALL >> INSTALL IMAGE >> select image to flash >> select partition.[/B]
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
Flash with ODIN 3.12.7 in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
NOTE: FAILURE TO FOLLOW THE STEPS ABOVE IMPLICITLY WILL RESULT IN STOCK RECOVERY REPLACING TWRP AT FIRST BOOT.
NOTE: ON ANDROID 5.1.1/6.0/7.0 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
Flash the latest SuperSU release with TWRP:
To disable forced encryption, disable dmverity and mount internal storage:
(Note this MUST be flashed after SuperSU if you intend to root)
1. Boot to Twrp
2. Format Data partition using FORMAT DATA button under Wipe options.
(Note: This will wipe the internal storage)
3. Check DATA is mountable.
4. Install SuperSU (if root is required)
5. Install boot image patch below.
Boot image patch
DEVICE TREE: soon
PLEASE DO *NOT* DIRECT LINK TO THESE FILES. PLEASE LINK TO THIS POST
Credits: Me, my tester @lemlis, Teamwin
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
FEEDBACK IS APPRECIATED PLEASE.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU