This is my post basically backing up files for the Galaxy Note 10.1 GT-N8013 "p4noterf" so we don't lose them later.
Restore factory fimeware
If you have crashed out your Galaxy Note 10.1 GT-N8013 and need to restore it try the following
1. First make sure you can enter download mode: Power + Vol. Down and then Vol. Up to continue (Google if unclear)
2. Download the latest factory firmware (N8013UEUCOI1_N8013XARCOI1_XAR) here:
https://mega.nz/#F!UdFwWLyL!006TWe3MPyK-9yeAJlH7AQ
3. We need it unzipped so unzip it.
4. Download Odin such as Odin 3.13.1 here: https://mega.nz/#!wZ9H1ArK!TLiWdY9YUKNzVpnVXuqzJz4rtA86XysGlmFfdWl5LvE
5. Unzip Odin and click it to start it up. It's the file named Odin3 v3.13.1 (or Odin3 v3.13.1.exe)
6. With your tablet in download mode plug it into your computer, it should show up in Odin
(If it won't connect to PC try another USB port or install the drivers: https://mega.nz/#!lFMVDbSC!j_sMAjcXneHSPkqgOysc382dqVzNB82QP5T_Huet8YA )
7. Load the unzipped firmware into the AP slot and press start
Install CWM Recovery and Root:
Follow the second root method here:
https://xdaforums.com/showthread.php?t=1831152
---> which leads to here: http://rootgalaxynote.com/galaxy-no...t-galaxy-note-10-1-easiest-methodcwmmethod-2/
Backup of files from this method: https://mega.nz/#F!5c8lHSLR!540QzdGl4z1kknFNYlmNDg
Install TWRP
1. Through Google Play store Install TWRP app and either select your device, download files and flash firmware in the app or continue at step 2 after installing.
2. You can direct download latest versoin to your sdcard (Download folder will do): https://dl.twrp.me/n801x/
Backup of latest at the time of this writing was ===> https://mega.nz/#F!EYlXCQhB!fTx37McGKNCWXkumldtHLA
3. Inside the TWRP app select the file you downloaded
4. Flash firmware
You can now use TWRP to install a custom rom if you wish, I used CM 13.1
https://xdaforums.com/galaxy-note-10-1/development/rom-lollipop-t3269375
Note:
I had to use this gapps to get my keyboard to work during setup!!!
https://mega.nz/#!Id1VXK7T!3VfvcdmyDzofaAmEBlhpgArxBmtJVW43wq55bEMEPgw
1. On the WiFi screen in the bottom corner there's a little keyboard symbol, touch it to open option.
2. Move slider to On position
Restore factory fimeware
If you have crashed out your Galaxy Note 10.1 GT-N8013 and need to restore it try the following
1. First make sure you can enter download mode: Power + Vol. Down and then Vol. Up to continue (Google if unclear)
2. Download the latest factory firmware (N8013UEUCOI1_N8013XARCOI1_XAR) here:
https://mega.nz/#F!UdFwWLyL!006TWe3MPyK-9yeAJlH7AQ
3. We need it unzipped so unzip it.
4. Download Odin such as Odin 3.13.1 here: https://mega.nz/#!wZ9H1ArK!TLiWdY9YUKNzVpnVXuqzJz4rtA86XysGlmFfdWl5LvE
5. Unzip Odin and click it to start it up. It's the file named Odin3 v3.13.1 (or Odin3 v3.13.1.exe)
6. With your tablet in download mode plug it into your computer, it should show up in Odin
(If it won't connect to PC try another USB port or install the drivers: https://mega.nz/#!lFMVDbSC!j_sMAjcXneHSPkqgOysc382dqVzNB82QP5T_Huet8YA )
7. Load the unzipped firmware into the AP slot and press start
Install CWM Recovery and Root:
Follow the second root method here:
https://xdaforums.com/showthread.php?t=1831152
---> which leads to here: http://rootgalaxynote.com/galaxy-no...t-galaxy-note-10-1-easiest-methodcwmmethod-2/
Backup of files from this method: https://mega.nz/#F!5c8lHSLR!540QzdGl4z1kknFNYlmNDg
Install TWRP
1. Through Google Play store Install TWRP app and either select your device, download files and flash firmware in the app or continue at step 2 after installing.
2. You can direct download latest versoin to your sdcard (Download folder will do): https://dl.twrp.me/n801x/
Backup of latest at the time of this writing was ===> https://mega.nz/#F!EYlXCQhB!fTx37McGKNCWXkumldtHLA
3. Inside the TWRP app select the file you downloaded
4. Flash firmware
You can now use TWRP to install a custom rom if you wish, I used CM 13.1
https://xdaforums.com/galaxy-note-10-1/development/rom-lollipop-t3269375
Note:
I had to use this gapps to get my keyboard to work during setup!!!
https://mega.nz/#!Id1VXK7T!3VfvcdmyDzofaAmEBlhpgArxBmtJVW43wq55bEMEPgw
1. On the WiFi screen in the bottom corner there's a little keyboard symbol, touch it to open option.
2. Move slider to On position
Last edited: