FORUMS
Remove All Ads from XDA

[3.4.113][CLANG]Lolz-Kernel v10[STABLE]

1,150 posts
Thanks Meter: 2,943
 
Post Reply Email Thread
Announcement from jprimero15: LOLZ Version 10 is here !!!


Code:
/*
 * Your warranty is now void lmao.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this KERNEL
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */
INTRODUCTION
Lolz Kernel makes your device even snappier than before. Being a battery happy and performance balanced kernel it never compromises on stability. You know why? Cause your device deserves it! Lolz Kernel main priority is battery. More Juice equals More Fun.


Supported Galaxy Note 3 Variants(codename):
* hlte/hltexx/hltespr
* hltechn
* hltekor/ktt/skt
*hltetmo

Supported Android Version:
* Oreo
* PIE

Supported ROMs:
* All AOSP based ROMs
* All CAF Based ROMs
* All LineageOS Based ROMs


Major Features:
* Splashloop Proof Since V9.0 🤣
* Compiled with AOSP CLANG 9.0.4
* Systemwide WQ_POWER_EFFICIENT
* BACKPORT: F2FS from Linux 4.11-rc1
* Custom CPU governors: Lolznappy, Elemental-X, Nightmare, Alucard, Intelliactive and zzmoove.
* Tweaked Interactive CPU Governor
* CPU Boost Patches
* CPU Voltage Control
* Removed MPdecision
* CPUQUIET Hotplug Driver
* Custom Hotplug Drivers: MSM Hotplug
* CPU Underclock and Overclock: 268MHz to 2496MHz (2265MHz is the default max frequency for Balanced Usage)
* GPU Underclock and Overclock: 100MHz to 600MHz (27mhz @ Idle)
* GPU: Adreno Idler (Enabled by default)
* Sound Control V3
* Boeffla Wakelock blocker V1.1.0
* TCP Congestion: Westwood as default
* Screen: K-lapse v5.0 & KCAL
* Custom Schedulers: Fiops, Maple, Fifo, VR, SIOPlus, Tripndroid, ZEN
* USB/AC Fastcharge V1.3
* PowerSuspend v1.8
* Underhood Optimizations, Code fixes and Tweaks



How to install?
* CLEAN FLASH METHOD:
- Read Carefully!(you need to do this every time you flash this custom kernel)
1. Be sure you are not using any custom kernel.. If you are, then you need to dirty flash or just flash the stock boot.img of the ROM you are using.
2. Goto TWRP then flash Magisk(always Magisk zip first, before the kernel zip(if you do not need root then skip this)
3. flash the Lolz kernel zip.
4. Reboot(just wait for it to boot)
5. Enjoy .

* DIRTY FLASH METHOD (For LAZY Users)
1. Reboot to TWRP Recovery ( I will assume that you habe this Custom Recovery )
2. Flash Magisk Zip (Not needed if you have installed this on previous kernel already)
3. Flash the Lolz kernel zip
4. Reboot
5. Enjoy being dirty



Donations are very much appreciated..
Thanks for supporting Lolz kernel
My Donation link




DOWNLOAD LINK:
https://www.androidfilehost.com/?w=files&flid=297902




You want to be testers, ask questions or just want to talk to hlte users?... Join the fun now: (hlte TG group): https://t.me/galaxynote3



Kernel Source: Click here boi

Thanks to:
@haggertk (for LineageOS support)
@NMBNMB(bro)
@Chinaboy5216 (tester)
@gj86
@Jairus980
@pascua28
@sunilpaulmathew
@osm0sis (for anykernel)
and to all devs, contributors and testers out there...

XDA:DevDB Information
Lolz-Kernel, Kernel for the Samsung Galaxy Note 3

Contributors
jprimero15
Kernel Special Features: Smooth + Battery friendly

Version Information
Status: Stable

Created 2019-07-18
Last Updated 2019-08-17
The Following 69 Users Say Thank You to jprimero15 For This Useful Post: [ View ]
 
 
5th July 2018, 04:39 AM |#2  
jprimero15's Avatar
OP Recognized Developer
Flag Oof
Thanks Meter: 2,943
 
Donate to Me
More
***Rules for Feature requests***
1. I Can accept feature requests.
2. I Can ignore feature requests.
3. At least give me the commit's link of feature you want.


***Rules on reporting bugs***
1.Give logs.. (There are lot of tutorial here in xda on how to get logs)
2. Wait for it to boot maximum of 3minutes.. (If u did wiped /data/dalvik-cache it will take more time)
3. Which variant you have.. Hlte/chn/tmo/kor/spr?
4. What ROM, build date and other info about the rom you are using currently..
5. Be sure you followed the proper installing procedure.
6. If you want root then i recommend MAGISK.
7. Be sure you clear data all of your tweaking app first before installing example: kernel auditor, lspeed etc..
8. Say what Lolz version you are using (example: Lolz V9.1)
And plz try other version too...
9. Be sure that the problem is not ROM's fault..
10. Report all of this here.
The Following 16 Users Say Thank You to jprimero15 For This Useful Post: [ View ]
5th July 2018, 04:40 AM |#3  
jprimero15's Avatar
OP Recognized Developer
Flag Oof
Thanks Meter: 2,943
 
Donate to Me
More
Oof
The Following 3 Users Say Thank You to jprimero15 For This Useful Post: [ View ]
5th July 2018, 04:41 AM |#4  
Junior Member
Thanks Meter: 1
 
More
Will test & update
5th July 2018, 05:03 AM |#5  
Chinaboy5216's Avatar
Senior Member
Flag Foshan, China
Thanks Meter: 2,045
 
More
Good to see a new thread for the Note 3.

Kernel is working great, many thanks @jprimero15
The Following User Says Thank You to Chinaboy5216 For This Useful Post: [ View ] Gift Chinaboy5216 Ad-Free
5th July 2018, 05:15 AM |#6  
Senior Member
Flag cairo
Thanks Meter: 132
 
More
Good to see a new kernel

BTW your kernel have no fast charge i tried by copying script to init.d and gave the permission 755 and tried to excute it by kernel auditor and tried to enable fast charge in KA but no luck
5th July 2018, 05:51 AM |#7  
Chinaboy5216's Avatar
Senior Member
Flag Foshan, China
Thanks Meter: 2,045
 
More
Quote:
Originally Posted by ammar_maher

Good to see a new kernel

BTW your kernel have no fast charge i tried by copying script to init.d and gave the permission 755 and tried to excute it by kernel auditor and tried to enable fast charge in KA but no luck

Device with Lolz is charging at 1800mA here.
5th July 2018, 06:44 AM |#8  
jprimero15's Avatar
OP Recognized Developer
Flag Oof
Thanks Meter: 2,943
 
Donate to Me
More
Quote:
Originally Posted by ammar_maher

Good to see a new kernel

BTW your kernel have no fast charge i tried by copying script to init.d and gave the permission 755 and tried to excute it by kernel auditor and tried to enable fast charge in KA but no luck

The kernel have fast charge..if not working then..Try reinsterting your charger... And if no luck.. Try changing cable or whole charger...
5th July 2018, 06:59 AM |#9  
Senior Member
Flag cairo
Thanks Meter: 132
 
More
Quote:
Originally Posted by jprimero15

The kernel have fast charge..if not working then..Try reinsterting your charger... And if no luck.. Try changing cable or whole charger...

Im using original cable and charger
5th July 2018, 09:33 AM |#10  
jprimero15's Avatar
OP Recognized Developer
Flag Oof
Thanks Meter: 2,943
 
Donate to Me
More
Quote:
Originally Posted by ammar_maher

Im using original cable and charger

Try changing cable or whole charger.. Maybe that's old and not functioning properly now.. And maybe ur phone detecting your charger as "USB Charger" instead of "AC Charger" it should be detected as "AC" and. Mine is working properly with fastcharge.. It works
The Following User Says Thank You to jprimero15 For This Useful Post: [ View ]
5th July 2018, 12:00 PM |#11  
jprimero15's Avatar
OP Recognized Developer
Flag Oof
Thanks Meter: 2,943
 
Donate to Me
More
Working
Attached Thumbnails
Click image for larger version

Name:	Screenshot_Ampere_20180705-185830.jpg
Views:	9534
Size:	116.5 KB
ID:	4542272  
Post Reply Subscribe to Thread

Tags
battery friendly, kernel, pie, smooth, snapdragon

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes